21November2019

Nano-Micro Letters

Applications of MxSey (M = Fe, Co, Ni) and their Composites in Electrochemical Energy Storage and Conversion

View ResearcherID and ORCID

Huijie Zhou1, Xiaxia Li1, Yan Li1, Mingbo Zheng1, Huan Pang1, *

Abstract
icon-htmlFull Text Html
icon-pdf-smPDF w/ Links
icon-citExport Citation
Figures
+Show more

Nano-Micro Lett. (2019) 11: 40

First Online: 15 May 2019 (Review)

DOI:10.1007/s40820-019-0272-2

*Corresponding author. E-mail: panghuan@yzu.edu.cn (Huan Pang)

 

Abstract

 


Toc

Transition metal selenides (MxSey, M = Fe, Co, Ni) and their composites exhibit good storage capacities for sodium and lithium ions and occupy a unique position in research on sodium-ion and lithium-ion batteries. MxSey and their composites are used as active materials to improve catalytic activity. However, low electrical conductivity, poor cycle stability, and low rate performance, severely limit their applications. This review provides a comprehensive introduction to and understanding of the current research progress of MxSey and their composites. Moreover, this review proposes a broader research platform for these materials, including various bioelectrocatalytic performance tests, lithium–sulfur batteries, and fuel cells. The synthesis method and related mechanisms of MxSey and their composites are reviewed, and the effects of material morphologies on their electrochemical performance are discussed. The advantages and disadvantages of MxSey and their composites as well as possible strategies for improving the storage and conversion of electrochemical energy are also summarized.


 

Keywords

MxSey; Battery; Supercapacitor; Electrocatalysis

 

Full Text Html

1 Introduction

    As the main form of energy for storage, output, and conversion, electric energy is widely used in all aspects of industrial production and life. It has become the driving force for the development of science and technology [1, 2]. Therefore, developing an electrochemical power source with high power density, large storage capacity, high energy density, long service life, and low cost is of significant importance [3–6]. Among the recent studies on electrochemical energy storage and conversion, many have reported on transition metal sulfides, such as MoS2 [7–9], VS2 [10–12], CoS2 [13–16], FeS2 [17–20], and SnS2 [21–24], especially in the field of electrochemical energy storage and conversion. Because selenium and sulfur belong to the same main group, there are certain similarities in their physical and chemical properties [25]. Therefore, transition metal selenides (MxSey) and their composites continue to be the focus of research on electrochemical energy storage and conversion.
    In recent years, significant advances have been made in MxSey and their composites for their application in electrochemical energy storage and conversion. The ordered nanoarray structure of MxSey can eliminate the disadvantages posed by traditional electrode preparation technologies, shorten the diffusion path of ions, expand the contact area between the electrode material and electrolyte, avoid the aggregation of the electrode material in a Faraday reaction, and increase the load of the active material on the collector [1, 26, 27]. Moreover, because of the inherent metallic properties of multicomponent selenides, synergistic effect among polymetallic ions, superhydrophilicity of the material surface, unique honeycomb array, and multistructural robustness, MxSey and their composites have broad application prospects [28–30]. The good cycle performance and ideal conductivity of MxSey make it an electrode material with wide-ranging application prospects.
    In this review, we summarize the uses of MxSey (M = Fe, Co, Ni) and their composites in electrochemical energy storage and conversion, such as battery and supercapacitor (SC) applications. MxSey and their composites are also widely used in electrochemical energy conversion applications such as the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER). Moreover, MxSey (M = Fe, Co, Ni) and their composites find applications in other electrochemical energy fields. As shown in Fig. 1a, we review the related literature from 2006 to 2018 to summarize the research and application trends of MxSey (M = Fe, Co, Ni) and their composites in batteries, SCs, and electrocatalysis. The related research has increased year after year, especially in the field of batteries. Additionally, as shown in Fig. 1b, we detail their applications in various subareas of batteries, such as lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), and others. As can be seen, these materials are widely studied for battery applications, especially in LIBs.

Fig. 1 a Research trends of transition metal selenides in electrochemical energy storage (batteries, SCs) and conversion (electrocatalysis) from 2006 to 2018. b Use of transition metal selenides in various types of batteries (LIBs, SIBs, and other batteries)

Fig. 1 a Research trends of transition metal selenides in electrochemical energy storage (batteries, SCs) and conversion (electrocatalysis) from 2006 to 2018. b Use of transition metal selenides in various types of batteries (LIBs, SIBs, and other batteries)

2 Batteries

    Rechargeable batteries have become one of the most attractive energy storage devices because they offer environmental protection, high storage efficiency, low maintenance cost, good cycle stability, and satisfactory energy and power performance [31]. The charge state of any rechargeable battery, regardless of its chemical nature, is a necessary parameter for battery management systems of hybrid electric vehicles [32]. Furthermore, electrode materials play an important role in improving the electrochemical performance of batteries [33]. Electrode materials used in the most advanced single metal-ion batteries (such as LIBs and SIBs) offer the advantages of environmental protection, high storage efficiency, low maintenance cost, good cycle stability, and good power performance [34]. Therefore, applications of MxSey in the fields of rechargeable batteries, SCs, and catalysts have attracted increasing attention.
2.1 Lithium-Ion Battery
    Rechargeable LIBs are electrochemical energy storage devices consisting of two electrodes connected by an electrolyte and a separation membrane [35]. LIBs, with their highest energy density and longer cycle life, dominate the rechargeable, portable electronics, and electric vehicle markets [36–38]. However, LIBs have many drawbacks. For example, their constituents are toxic, combustible, and cause other safety-related problems [10, 11]. Therefore, owing to their excellent properties, TiSe2, ZrSe2, NbSe2, Te2Se, Mo6Se6, and VSe have been widely used as rechargeable Li battery energy storage materials.

2.1.1 Cobalt Selenium
    As an important functional material, MxSey has been widely studied for its use in energy storage. Recently, Wang et al. prepared CoSe2@carbon nanotubes (CNFs) (Fig. 2d, e) by electrospinning and subsequent annealing using encapsulated Co nanoparticles (Co@CNFs, Fig. 2c) to synthesize porous graphite CNFs (Fig. 2a). When used as a negative electrode material for LIBs, CoSe2@CNF has excellent Li storage properties and a high reversible capacity of 1405 mAh g−1 after 300 cycles at a current density of 200 mA g−1 (Fig. 2h, i) [39]. The hollow structure with a special shell shape is a popular focus in studies on electrochemical energy storage applications. Starting from metal–organic frameworks (MOFs), Hu et al. [40] reported on the generation of CoSe@CNFs using zeolitic imidazolate framework (ZIF-67) nanomicrospheres and the Se powder as the precursor (Fig. 2b). In the synthesis process, CoSe2 nanoparticles were uniformly distributed in the carbon shell at a low annealing temperature. After further annealing at a high temperature, CoSe2 nanoparticles were further chemically transformed into CoSe@CNFs (Fig. 2f, g). The CoSe@CNF composite had initial charge and discharge capacities of 796 and 1016 mAh g−1, respectively, at a current density of 0.2 A g−1, and its initial coulombic efficiency was 78.3% (Fig. 2j). The slow redox kinetics and dissolution of polyselenides can cause severe degradation of the Li–Se battery capacity, thereby limiting their practical applications to some extent. Later, Li et al. [41] used ZIF-67 as a precursor to embed advanced CoSe nanoparticles in a novel porous carbon polymer to produce a new CoSe@PCP composite for LIBs and SIBs. CoSe@PCP not only has an outstanding lithium-ion storage performance but also a high specific capacity. In addition, it has excellent rate performance and a long life. The proposed strategy not only provides a method for synthesizing nanoscale electroactive materials and porous carbon composites with a regular morphology but also shows the considerable potential of selenide as a high-performance anode material for LIBs and silicon carbon rods. Yang et al. [42] prepared a mixed CoSe2N-CF/CNT superstructure composed of internal CoSe2 nanoparticles and external CNT-entangled N-doped carbon skeletons through ZIF-67 by a simple two-step heat treatment procedure for LIBs and SIBs. The electrochemical reactions of CoSe2@N-CF/CNTs for lithium are as follows:

Lithium storage
Discharge process             CoSe2 + xLi + xe→ LixCoSe2             (1)
LixCoSe2 + Li++ e→ Co + Li2Se          (2)
Charge process             Co + Li2Se → LixCoSe2 + Li+ + e            (3)
LixCoSe2 → CoSe2 + xLi+ + xe           (4)
Total reaction equation       CoSe2 + 4Li++ 4e ↔ Co + 2Li2Se          (5)

    Dual-anode materials in LIBs and SIBs exhibit excellent electrochemical performance (they also provide a high reversible capacity of 428 mAh g−1 after 500 cycles of an LIB, at 0.1 A g−1, and capacity of 606 mAh g−1 after 100 cycles of an SIB). In addition, electrochemical kinetic analysis shows that at high scan rates, tantalum capacitance contributes to the charge storage capacity, thus achieving a high rate performance of LIBs and SIBs. The effective synthesis strategy described in this work provides new insights into the high-performance dual-anode materials of LIBs and SIBs. Gao et al. [43] synthesized CoSe2 MoSe2/C HNT with high reversibility and excellent rate performance for Li+ storage, with high capacity retention at higher currents; this indicates that hybrid nanostructures have broad application prospects in LIBs.

Fig. 2 a Schematic diagram of the synthesis of Co@CNF and CoSe2@CNF. b Schematic diagram of CoSe@CNF formation process. c SEM image of Co@CNFs. d SEM image of CoSe2@CNFs. e TEM image of CoSe2@CNFs. f, g Images showing annealing of a ZIF-67 nm cube and Se powder for 2 h and synthetic CoSe2/CNF FESEM under a nitrogen atmosphere at 350 ℃. h Rate performance at different current densities. i The electrochemical performance of CoSe@CNF and CoSe2@CNF electrodes before and after cycling in the Nyquist diagram. j Discharge and charge voltage curves at a current density of 0.2 A g−1.

Fig. 2 a Schematic diagram of the synthesis of Co@CNF and CoSe2@CNF. b Schematic diagram of CoSe@CNF formation process. c SEM image of Co@CNFs. d SEM image of CoSe2@CNFs. e TEM image of CoSe2@CNFs. f, g Images showing annealing of a ZIF-67 nm cube and Se powder for 2 h and synthetic CoSe2/CNF FESEM under a nitrogen atmosphere at 350 ℃. h Rate performance at different current densities. i The electrochemical performance of CoSe@CNF and CoSe2@CNF electrodes before and after cycling in the Nyquist diagram. j Discharge and charge voltage curves at a current density of 0.2 A g−1.

    The structure has a significant influence on the material properties, and the spatial structure of the synthetic material has a certain influence on the conduction of electrons. For example, Li et al. [44] synthesized a graphene/cobalt selenide (rGO/CoSe2) composite with pleats. Figure 3a shows that CoSe2 nanoparticles are tightly anchored/wrapped on rGO flakes. The rGO/CoSe2 composite has better cycle and electrochemical properties compared with those of pure CoSe2 (Fig. 3b). In this study, the innovative composite of CoSe2 and rGO not only reduces the structural degradation caused by volume expansion but also effectively improves the electrical conductivity of the entire electrode, thereby significantly improving the storage performance of lithium. Nevertheless, Chen et al. [45] used ZIF-67 as a precursor and the Se powder to synthesize porous copper-doped CoSe2 with nanoparticles interconnected by annealing (Fig. 3c). The porous material can be used as a negative electrode material for LIBs during the charge and discharge processes. It is well adapted to volume expansion, and the porous structure effectively shortens the ion and electron transport paths. This gives it a superior rate performance (Fig. 3d) and good cycle stability.

Fig. 3 a SEM images of rGO/CoSe2 composite. b Cycling performance of rGO/CoSe2 composite. c TEM image of porous Cu-doped CoSe2. d Capacitances at current densities varying from 0.1 to 5.0 A g-1.

Fig. 3 a SEM images of rGO/CoSe2 composite. b Cycling performance of rGO/CoSe2 composite. c TEM image of porous Cu-doped CoSe2. d Capacitances at current densities varying from 0.1 to 5.0 A g-1.

2.1.2 Nickel Selenium
    Recently, scientists have synthesized electrode materials with superior properties for Li storage by means of pulsed laser deposition. Yang et al. [46] successfully synthesized the NiO–NiSe nanocomposite film by pulsed laser deposition and used it as an anode material of LIBs to explore the mechanism of the electrochemical reaction as follow:

NiO + NiSe + 4Li+ + 4e ⇆ 2Ni + Li2O + Li2Se                       (6)

    The discharge electrode shown in Fig. 4b has a rougher surface, where the micronized clusters are composed of nano-sized particles. After the battery was recharged to 3.0 V, the micronized clusters of the material disappeared, and the electrode surface exhibited a honeycomb structure, as shown in Fig. 4e. The composite electrode had an initial discharge capacity of 577.7 mAh g−1 (Fig. 4f) and was able to maintain a capacitance of 495 mAh g−1 after 1 and 50 cycles (Fig. 4g). The above investigation showed that the composite material also had good multiplier performance and discharge function. Even at the 2C rate, the capacity remains stable, which proves that the NiO–NiSe nanocomposite material can be decomposed reversibly and reformed during emission/charging. This study indicates that the NiO–NiSe composite will be an ideal choice for LIB anode materials in the future. In addition, Mi et al. [47] successfully designed tubular NiSe with a three-dimensional (3D) layered nanometer/microstructure via an in situ growth method (Fig. 4a). For the first time, the structure and shape of NiSe were adjusted by adjusting the reaction time. It was observed that by heat-treating the NiSe microplate, it could be entangled into microtubes over time (Fig. 4c, d). As an intermediate product, these microtubules could eventually be developed into hierarchical microtubules. In addition, Mi et al. determined that when the reaction temperature reached 180 °C, the solvent was converted into 10 mL of ethylenediamine and 6 mL of deionized water, and then obtained another NiSe microtube composed of nanoparticles. The two types of NiSe microtubes obtained through this method can be used directly as working electrodes of a coin battery. A LAND system (model CT2001A) was used for charge and discharge cycles in the 1.0–3.0 V potential range. The charge and discharge reaction mechanisms of NiSe were as follows:

NiSe + 2e⇆ Ni + Se2−                                                       (7)
Li + Se2− ⇆ Li2Se + 2e−                                                       (8)

    The initial reversible capacity was 410.7 mAh g−1, which was much larger than the theoretical capacity of 398.5 mAh g−1. However, Zhang et al. [48] developed a core–shell NiSe/C composite polymerization process using a two-step process. After five cycles, the core–shell NiSe/C composite had a reversible lithium storage capacity of 431 mAh g−1 and maintained a storage capacity of 428 mAh g−1 after 50 cycles.

Fig. 4 a Schematic diagram of the morphology evolution of nickel grown in situ on foamed nickel. b SEM image of NiO–NiSe electrode after initially discharging to 0.01 V. c Schematic diagram of the morphology evolution of nickel crystal grown in situ on foamed nickel with a reaction time of 16 h. d Schematic diagram of the morphology evolution of nickel crystal grown in situ on foamed nickel with a reaction time of 20 h. e SEM image of NiO–NiSe electrode after initially charging to 3.0 V. f At a current density of 20 mA g−1, the initial discharge and charge and discharge curves of the NiO–NiSe electrode in the voltage range of 0.1–3.0 V were 30. g Cycling performance of NiO–NiSe thin film electrode for the initial 50 cycles.

Fig. 4 a Schematic diagram of the morphology evolution of nickel grown in situ on foamed nickel. b SEM image of NiO–NiSe electrode after initially discharging to 0.01 V. c Schematic diagram of the morphology evolution of nickel crystal grown in situ on foamed nickel with a reaction time of 16 h. d Schematic diagram of the morphology evolution of nickel crystal grown in situ on foamed nickel with a reaction time of 20 h. e SEM image of NiO–NiSe electrode after initially charging to 3.0 V. f At a current density of 20 mA g−1, the initial discharge and charge and discharge curves of the NiO–NiSe electrode in the voltage range of 0.1–3.0 V were 30. g Cycling performance of NiO–NiSe thin film electrode for the initial 50 cycles.

2.1.3 Iron Selenium
    In the past decade, porous and hollow nanomaterials with various morphologies and compositions have been extensively developed for energy storage, catalysis, gas sensors, drug delivery, and hydrogen precipitation reactions [49]. Furthermore, Liu et al. [50] successfully synthesized Fe2SeS through a simple solid inverse reaction and electrochemical research and reported, for the first time, the use of Fe2SeS as the anode of a LIB. The electrochemical reaction mechanism of Fe2SeS with lithium can be expressed as follow:

Fe2SeS + 4Li+ +2e⇆ Li2Se + Li2S + Fe                           (9)

    LIB electrochemical tests show that Fe2SeS can provide a large initial discharge capacity of 471 mAh g−1. Its initial coulombic efficiency (92.56%) was higher than those of most previously reported anionic compounds. The electrochemical reaction of Fe2SeS and Li has good reversibility. The Fe2SeS electrode has a high capacity and low discharge and charging levels and is thus a promising anode candidate for LIBs.
    Wei et al. [51] synthesized a carbon-encapsulated α-FeSe (αFeSe@C) electrode material by a one-step reaction method (Fig. 5a). The surface-structured αFeSe@C composite was observed by SEM. The microscopic morphology is shown in Fig. 5b. The first four consecutive CV electrochemical properties of the product were evaluated at a scan rate of 0.1 mV s−1, as shown in Fig.5c. The performance of the composite at a current density of 40 mA g−1 is shown in Fig. 5d. The potential energy storage and conversion applications can be observed from the performance chart analysis.

Fig. 5 a Schematic of α-FeSe reveals the crystal structure of the layered structure. b SEM image of the sample. c The first four consecutive CVs of the α-FeSe@C composite have a scan rate of 0.1 mV s−1. d Cycle performance of the composite at a current density of 40 mA g−1.

Fig. 5 a Schematic of α-FeSe reveals the crystal structure of the layered structure. b SEM image of the sample. c The first four consecutive CVs of the α-FeSe@C composite have a scan rate of 0.1 mV s−1. d Cycle performance of the composite at a current density of 40 mA g−1.

2.2 Sodium-Ion Battery
    Owing to its physical and chemical properties that are similar to the LIB, the SIB is considered an ideal energy storage technology [52]. The main challenge in SIBs is to find suitable electrodes, especially materials with excellent sodium storage properties. Owing to their physical and chemical properties bearing similarities, the materials used sometimes allow Li to embed the same crystal structure that is suitable for Na embedding. Therefore, all types of SIB electrode materials have the characteristics of LIB electrode materials [53]. In turn, the new electrode materials invented for use in LIBs are also of significance for the study of SIB electrodes. However, this strategy is not always feasible. Sodium resources are not only abundant and widely distributed in the earth's crust but also cost less. Therefore, recently, room-temperature SIBs have received much attention from researchers, especially for large-scale power storage applications. The use of low-cost materials for electrodes is an important advantage of the SIB; however, the SIB poses enormous challenges compared to the LIB. The challenges faced with SIBs can be overcome by continuing research and constantly searching for new low-cost materials with good performance and stability [36].

2.2.1 Cobalt Selenium
    Using a cobalt organic skeleton (ZIF-67) as the sacrificial template, Zhang et al. [54] studied the CoSe/C mesoporous dodecahedron formed by ZIF-67 and the Se powder at different temperatures in the original position of the nitrogen-doped carbon matrix. Figure 6c, d, and e shows microscopic topographical views of dodecahedral CoSe/C composites formed at different temperatures. Because the CoSe nanoparticles are only approximately 15 nm in size, they can be trapped in the mesoporous carbon skeleton. As a new type of anode material for SIBs, the CoSe/C composite material exhibits high capacity and performance. When the current densities are 0.2 and 16 A g−1, the specific capacities of the composite electrodes are 597.2 and 361.9 mAh g−1, respectively. As an electrode material for SIBs, the CoSe/C dodecahedron has outstanding magnification, and its cycle stability is better (Fig. 6h). The transition metal S prepared using this method also has high electrochemical properties. Park et al. [55] synthesized the CoSex-rGO composite powder for a SIB anode material by the one-step synthesis. The specific synthesis process is shown in Fig. 6a. The microscopic topography of the CoSex-rGO composite powder prepared under different conditions is shown in Fig. 6f, g. The results show that the CoSex-rGO composite powder has better cycle performance than the bare CoSex powder, regardless of the preparation temperature. A composite powder mainly composed of the Co0.85Se and CoSe2 phases was prepared under spray pyrolysis conditions at 800 °C. At a constant current density of 0.3 A g−1, the discharge capacity of the two materials could be compared for the 50th and 2nd cycles, and the composite powder of CoSex-rGO had a high density during repeated sodium-ion charging and discharging (Fig. 6b). Furthermore, the CoSex-rGO composite powder has structural stability. Therefore, it has excellent sodium storage properties compared to the bare amphoteric powder. Later, Li et al. [41] used ZIF-67 as a precursor to embed advanced CoSe nanoparticles in a novel porous carbon polymer to produce a new CoSe@PCP composite for LIBs and SIBs. For the SIB, after 100 cycles of 100 mA g−1, its reversible capacity is 341 mAh g−1, with high cycle stability and excellent rate performance. Around the same time, Yang et al. [42] prepared a mixed CoSe2N-CF/CNT superstructure composed of internal CoSe2 nanoparticles and external CNT-entangled N-doped carbon skeletons through ZIF-67 by a simple two-step heat treatment procedure for LIBs and SIBs. The electrochemical reaction of CoSe2@N-CF/CNTs for sodium storage can be summarized as follows:

Sodium storage
Discharge process       CoSe2 + xNa+ + xe→ NaxCoSe2            (10)
NaxCoSe2 + (2 − x)Na+ + (2 − x)e → CoSe + Na2Se            (11)
CoSe + 2Na+ + 2e- → Co + Na2Se                     (12)
Charge process           Co + 2Na2Se → CoSe2 + 4Na+ + 4e−                        (13)

    Gao et al. [43] evaluated the potential application of CoSe2 MoSe2/C HNT as a candidate material for SIBs anodes. Studies have shown that it has good storage efficiency and high stability for sodium.

Fig. 6 a Formation mechanism of CoSex–rGO composite powder by one-pot spray pyrolysis process. b Electrochemical properties of the bare CoSex and CoSex–rGO composite powders’ cycling performance. SEM and TEM image of the CoSe/C composites synthesized at different temperatures, c CS-700, d CS-800, e CS-900. SEM image, SAED pattern, and elemental mapping image of the CoSex-rGO composite powders prepared at f 800 ℃, g 900 ℃. h Rate capability of the nitrogen-doped CoSe/C, CoSe/C, and bare CoSe. i Rate performances of the CS-800 electrode and many other anode materials for SIBs.

Fig. 6 a Formation mechanism of CoSex–rGO composite powder by one-pot spray pyrolysis process. b Electrochemical properties of the bare CoSex and CoSex–rGO composite powders’ cycling performance. SEM and TEM image of the CoSe/C composites synthesized at different temperatures, c CS-700, d CS-800, e CS-900. SEM image, SAED pattern, and elemental mapping image of the CoSex-rGO composite powders prepared at f 800 ℃, g 900 ℃. h Rate capability of the nitrogen-doped CoSe/C, CoSe/C, and bare CoSe. i Rate performances of the CS-800 electrode and many other anode materials for SIBs.

2.2.2 Nickel Selenium
    Yang et al. [56] used carbon-coated selenium nanowires as templates to synthesize carbon-loaded selenium-nickel hollow nanowires (Ni0.85Se/C). The specific synthesis method is shown in Fig. 7a. When used as a negative electrode material for SIBs, the Ni0.85Se/C nanowires provide a reversible capacity of approximately 390 mAh g−1 at a rate of 0.2 C (theoretical capacity of 416 mAh g−1) with no significant attenuation after cycling (Fig. 7g). However, in the first cycle, the irregular Ni0.85Se nanoparticles have a capacity of 390 mAh g−1 (Fig. 7h), which decreases to lower than 100 mAh g−1 after 50 cycles. Hollow nanowires provide excellent performance even under high-current conditions. Park et al. [57] used a pilot spray-drying process to prepare unique multicomponent metal S and Se microspheres. The specific synthesis of amylin decomposition in MoS2-Ni9S8 and MoSe2-NiSex microspheres produces empty nanoparticles, as shown in Fig. 7b. The microscopic morphology of the sample is shown in Fig. 7f, and the microscopic topography of MoSe2-NiSe-NiSe2 is shown in Fig. 7e. When the current density of sodium-ion storage was 0.5 A g−1, the capacity reserves measured in the second cycle were 91%, 102%, 92%, and 64%. The carbon-free MoS2-Ni9S8 microspheres exhibited excellent rate performance. When the current density increased from 0.1 to 3 A g−1, the discharge capacity decreased slightly from 559 to 428 mAh g−1. The MoS2-Ni9S8-C composite microspheres have high structural stability during multiple sodium-ion implantation and desorption processes and have high long-term cycle performance over 1000 cycles. In addition, Zhang et al. [48] synthesized a core–shell NiSe/C composite with a high sodium storage capacity (reversible lithium storage capacity of 339 mAh g−1 after 5 cycles and 280 mA h g−1 storage capacity after 50 cycles).

Fig. 7 a Self-template method schematic and advantages of carbon-supported hollow nanowires on bulk materials. b Formation mechanism of hollow nanowires in MoS2-Ni9S8-C, MoSe2-NiSe-C, MoS2-Ni9S8, and MoSe2-NiSe2 microspheres. SEM images of c Se/C and d Ni0.85Se/C hollow nanowires at different magnifications. e Morphologies of the multiroom-structured MoX2-NiXy (X¼ S or Se) after 100 cycles for MoSe2–NiSe–NiSe2 microspheres. f Morphologies of the multiroom-structured MoX2-NiXy (X¼ S or Se) after 100 cycles for MoSe2–NiSe–C microspheres. g Specific capacity and coulombic efficiency of Ni0.85Se/C hollow nanowires. h Special ability and coulombic efficiency of Ni0.85Se nanoparticles at 0.2 C.

Fig. 7 a Self-template method schematic and advantages of carbon-supported hollow nanowires on bulk materials. b Formation mechanism of hollow nanowires in MoS2-Ni9S8-C, MoSe2-NiSe-C, MoS2-Ni9S8, and MoSe2-NiSe2 microspheres. SEM images of c Se/C and d Ni0.85Se/C hollow nanowires at different magnifications. e Morphologies of the multiroom-structured MoX2-NiXy (X¼ S or Se) after 100 cycles for MoSe2–NiSe–NiSe2 microspheres. f Morphologies of the multiroom-structured MoX2-NiXy (X¼ S or Se) after 100 cycles for MoSe2–NiSe–C microspheres. g Specific capacity and coulombic efficiency of Ni0.85Se/C hollow nanowires. h Special ability and coulombic efficiency of Ni0.85Se nanoparticles at 0.2 C.

 2.2.3 Iron Selenium
    In designing a superior transition metal selenide (TMS), the sodium-ion storage rate and cycle performance remain as significant challenges. Li et al. [58] uniformly immobilized FeSe2 on graphene nanosheets by the selenization of iron oxide. The specific synthesis process is shown in Fig. 8a. The surface oxide layer of FeSe2/GNS generates phase shift resistance at the bottom, inhibiting the formation of sodium ions and resulting in extremely poor storage kinetics of nano ions. It is worth noting that the surface of the prepared FeSe2 nanorod/graphene composite has almost no oxide layer and can reach a high capacity of 459 mA h g−1 (Fig. 8c). This strategy of controlling the surface oxidation to achieve high sodium-ion storage anodes has significant potential for other TMS designs. Later, Wei et al. [59] successfully synthesized a 3D FeSe2 cluster composed of nanorods using a simple hydrothermal method. As a SIB anode material, the prepared FeSe2 clusters have an excellent cyclic performance and a rate capacity up to 35 A g−1 (Fig.8e). The unique 3D structure reduced the ion diffusion length and slowed down the slow kinetics. After 400 cycles at 1 A g−1, they had an initial coulomb efficiency of 97.4% and a discharge capacity of 515 mA g−1. Furthermore, we demonstrated that unique 3D structures, high capacitance, and appropriate etheric electrolytes contribute to the improved electrochemical performance. The excellent overall performance of the FeSe2 cluster makes it a promising anode material for SIBs. Finally, the FeSex reduced graphene oxide (RGO) composite powder prepared by Park et al. [60] using the nanoscale Kirkendall diffusion method has a unique structure. The FeSex-rGo composite powder has a mixed-crystal structure of FeSe and FeSe2 phases (Fig. 8b). At a constant current density of 0.3 A g−1, the discharge capacities of the FeSex- and Fe2O3-rGo composite powders were 434 and 174 mAh g−1, respectively (Fig. 8d). At a high current density of 1 A g−1, the discharge capacity of the FeSex-rGo composite powder at 1600 cycles was 311 mAh g−1. The FeSex-rGo composite powder has excellent sodium-ion storage performance compared with that of the Fe2O3-rGo composite powder with similar morphological characteristics. Xu et al. [61] designed a simple MOF-derived selenization strategy for the synthesis of in situ carbon-encapsulated selenides. When used as an excellent anode for a SIB, the uniform pod-like Fe7Se8@C nanorods had a current density of 3 A g−1 with a high specific capacity of 218 mAh g−1 after 500 cycles, and the porous NiSe@C sphere showed a high ratio of 160 mAh g−1 after the second cycle at a current density of 3 A g−1 capacity. Owing to the high energy capacity, transition metal chalcogens have become the focus of researchers as a promising electrode material for SIBs. However, a limited cycle life and poor rate capabilities hamper their practical application. For the first time, Ali et al. [62] used a simple hydrothermal method to design and synthesize a graded porous iron–cobalt binary-metal selective (Fe2CoSe4, called FCSe) sphere using a unique selenization and annealing strategy. The synthesized FCSe was 816.3 mAh g−1 at 0.5 A g−1 and 400.2 mAh g−1 at 32 A g−1. The comprehensive strategy developed in this study opens a new approach. To achieve a high rate and long-term cycling of SIBs, a transition metal based binary metal selenide can be produced.

Fig. 8 a Schematic diagram of the synthesis of FeSe2/GNS-400. b Hollow FeSex nanoparticles and hollow Fe2O3 nanoparticles modify the formation mechanism of rGO composite powder by nano-Gildo diffusion. c Initial three charge and discharge curves of FeSe2/GNS-300 and FeSe2/GNS-400. d Electrochemical performance of the hollow FeSex- and Fe2O3-decorated rGO composite powders: cycling performances. e Electrochemical properties of the FeSe2 electrode prepared for SIB. Rate performance of FeSe2 clusters and particles after 50 cycles of current density from 1 to 35 A g−1.

Fig. 8 a Schematic diagram of the synthesis of FeSe2/GNS-400. b Hollow FeSex nanoparticles and hollow Fe2O3 nanoparticles modify the formation mechanism of rGO composite powder by nano-Gildo diffusion. c Initial three charge and discharge curves of FeSe2/GNS-300 and FeSe2/GNS-400. d Electrochemical performance of the hollow FeSex- and Fe2O3-decorated rGO composite powders: cycling performances. e Electrochemical properties of the FeSe2 electrode prepared for SIB. Rate performance of FeSe2 clusters and particles after 50 cycles of current density from 1 to 35 A g−1.

2.3 Other Batteries
2.3.1 Solar Cell
    High power conversion efficiency (PCE) and cost effectiveness are two long-term goals for dye-sensitized solar cells (DSSCs). Recently, Duan et al. [68] prepared a transparent, cost-effective Co–Se binary alloy without any surfactant or template, as a counterelectrode (CE) material in a DSSC through a mild solution strategy. The peak-to-peak separation (Epp) and Rct of the Co0.85Se alloy CE were lower than those of other electrodes; however, the CE exhibited a higher peak current density. It is worth noting that the DSSC front and back efficiencies of the Co0.85Se alloy CE were 8.30% and 4.63%, respectively, which indicated superior battery performance to that of the original Pt electrode. The advantages of such a double-sided solar cell system with a fast start-up, high multistart capability, low electronic recombination, and high photocurrent stability make this solar cell system potentially useful in vehicles, engines, and power supplies. The test results of the double-sided radiation technology show that it paves the way for cost-effective, efficient, and practical DSSCs. Owing to their cost-effectiveness, high electrical conductivity, good electrocatalytic activity, and reasonable stability, alloy materials have become an alternative electrocatalyst for electrochemical devices. To reduce the manufacturing costs without sacrificing the DSSC PCE, Liu et al. [69] reported the feasibility of designing a transparent and cost-effective Fe–Se alloy CE for the double-sided DSSC. Owing to the rapid charge transfer capability and electrocatalytic activity, the maximum pre- and post-efficiency values of the DSSC using the Fe alloy electrodes were 7.64% and 4.95%, respectively, whereas these values for the Pt-based solar cells were 6.97% and 3.56%, respectively. The impressive results and simple synthesis highlight the potential applications of Fe–Se alloys in robust double-sided DSSCs.

2.3.2 Aqueous Battery
    Nickel, cobalt oxide, sulfur, and selenium have been extensively studied by researchers as active substances. As the number of atoms of nonmetallic elements increases, enhanced capacities in energy storage applications are obtained. Li et al. [70] synthesized NiCoO2 by the hydrothermal method. They then prepared their corresponding sulfides and selenides by a corresponding ion exchange and studied the electrochemical process as the electrode material of a water battery. The results show that the local environment created by the electronic structures of S and Se leads to more Ni and Co cation activities. However, selenide exhibits a severely degraded performance during cycling, and S and Se losses are detected after the CV test, which causes a serious decrease in the capacity of sulfide and selenide. This study has some significance for the use of nickel, cobalt, sulfur, or seleniumnanostructures for aqueous batteries in the future.

2.3.3 Others
    Some researchers have studied the use of transition metal selenides in lithium–sulfur batteries. Xue et al. [64] successfully produced nickel diselenide by reactive pulsed laser deposition and checked the electrochemical behavior of NiSe2/Li cells by a constant-current cycle measurement and CV to achieve a large reversible discharge capacity of 351.4 mAh g−1 for the NiSe2/Li battery. According to the results of in-situ XRD, TEM, and SAED, the electrochemical reaction mechanism of NiSe2 and lithium was proposed as follows:

Discharge process       NiSe2 + 2Li → β-NiSe + Li2Se           (2.43–1.65 V)              (14)
3β-NiSe + 2Li → Ni3Se2 + Li2Se        (1.65–1.5 V)                (15)
Ni3Se2 + 4Li → 3Ni + 3Li2Se (1.5–1.0 V)                  (16)
Charge process                3Ni + 2Li2Se → Ni3Se2 + 4Li       (1.0–2.15 V)              (17)
Ni3Se2 + Li2Se → 3β-NiSe + 2Li        (2.15–2.4 V)                (18)
β-NiSe + Li2Se → NiSe2 + 2Li           (2.4–3.0 V)                  (19)

    In this study, Yang et al. [71] designed a CoSe2-porous carbon composite (CoSe2-PC), which was prepared by a simple annealing process, as a high-performance cathode material for LIBs. Se@CoSe2-PC has a reversible capacity of up to 408 mAh g−1 after 100 charge–discharge cycles at a current rate of 1C, and its performance is much better than that of porous carbon alone. Symmetrical battery detection of Se@CoSe2-PC in the presence and absence of polyselenide in the dielectric indicates that the Li–Se battery based on Se-CoSe2-PC has an excellent cycle performance. This enables the inhibition of the dissolution of polyselenide to ultimately achieve the high capacity and cycle stability of Li–Se batteries.
2.4 Summary
    From the aforementioned research on electrochemical energy storage devices, it can be observed that the LIB and SIB have been widely studied as highly efficient electrochemical energy storage devices. By comparing the data in Table 1, it is clear that LIBs have higher specific capacities and longer cycle lives than SIBs. Nevertheless, SIBs are widely used because of their rich sodium ion content and low redox potential. Researchers have also studied other types of batteries, such as solar cells and water-based batteries. The type, structure, and size of composite materials influence the electrochemical energy storage of various types of batteries. Comparing the literature, it is found that porous, core–shell, honeycomb, and 3D layered nanostructure tubular structures can effectively increase the ion transport space and shorten the ion and electron transport pathways, thereby improving the cycle stability of a battery [72].

Table 1 Application of iron/cobalt/nickel selenides in LIBs and SIBs

11 40 table1

3 Supercapacitor

    As a potential new type of material, SCs concentrate large amounts of energy in the form of electric charges and can release large amounts of energy in a short time. SCs have the advantages of working quickly, long life, high rate density, short charge–discharge time, and so on. However, their electrode material is a key link that directly determines the performance, output rate, and efficiency of the entire SC device [73]. However, the application of SCs as important energy storage devices is limited owing to their low energy density. This paper introduces a method to improve their energy density by improving the electrode material.
3.1 Cobalt Selenium
    Compared with other chalcogenides (such as O and S), Se has a lower electronegativity and larger ionic radius. For cobalt, the outermost orbital electrons are less attractive to selenide; instead, weakly bound electrons are prone to redox reactions. However, the provision of electroactive sites can improve the overall kinetics of the electrochemical reaction. The semiconducting properties of cobalt selenide and its low optical band gap have led to its wide use in the fields of catalysis, DSSC, and electrochemical energy storage systems in recent years [33, 34]. Zhu et al. [76] applied a 3D interconnected ultrathin CoSe nanosheet synthesized by the hydrothermal method to the field of SCs for the first time. Experimental studies have shown that 3D interconnected ultrathin CoSe nanosheets have a high specific capacity and significant multiplication performance. The 3D interconnected ultrathin CoSe nanosheets and activated carbon (AC) were assembled as the cathode and anode of a novel aqueous hybrid SC. The assembled capacitor mixing unit exhibited a specific energy of 18.6 Wh kg−1 at a specific power of 750 W kg−1. The aqueous hybrid SC had excellent coulombic efficiency (~100%) and excellent cycle life during charge–discharge cycles. According to the above research results, the new 3D interconnect ultrathin CoSe nanosheet material can be used as a potential electrode material for hybrid SCs owing to its good electrochemical performance. The redox peak can be attributed to the Faraday redox reaction between Co2+/Co3+ and Co3+/Co4+, and its redox principle can be expressed as follows:

CoSe + OH⇆ CoSeOH + e                                         (20)
CoSeOH + OH ⇆ CoSeO + H2O +                                (21)

    To improve the electrochemical performance of SCs, Ma et al. [77] synthesized sheet-like Bi18SeO29/BiSe and flower-like Co0.85Se nanosheets as the negative and positive electrodes of the full tantalum capacitor using a low-temperature one-step hydrothermal method. The electrochemical performance test of the SC device assembled with Bi18SeO29/BiSe and Co0.85Se shows that it has a high specific capacitance (471.3 and 255 F g−1 at 0.5 A g−1), excellent cycle stability, and high conductivity. The prepared tantalum capacitor has good cycle stability (a capacity retention rate of 93% after 5000 cycles at a current density of 2 A g−1). The research results show that the above preparation method is simple and easy, and it is a promising method for asymmetric SCs (ASCs). Balakrishnan et al. [78] synthesized a cobalt–selenide–graphene (CoSe-G) nanocomposite and pure CoSe using a simple one-step hydrothermal method. The reaction mechanism of CoSe in an alkaline solution is as follows:

CoSe + OH- ⇆ CoSeOH + e−                               (22)

    The microstructure of CoSe-G is shown in Fig. 9c, d. As shown in Fig. 9g, the assembled ASC can achieve a wide operating voltage of 1.6 V. The ASC has high power and energy densities and can maintain its initial specific capacity of 81.7% even after 5000 charge–discharge cycles (Fig. 9b). The test results show that the synergy between graphene and CoSe, together with the contribution of the two-layer material and the Faraday material, improves the overall electrochemical performance of the CoSe-G nanocomposite.

Fig. 9 a Solid preparation process diagram. b Ragone plots of an ASC device (energy density vs. power density). c FE-SEM image of CoSe nanoparticles. d FE-SEM image of a CoSe-G nanohybrid. e, f FE-SEM image of Co0.85Se nanosheets on Ni foam. g CV curve range of ASC at different scanning rates: 5–100 mv s−1. h Electrochemical performance of Co0.85Se nanosheets, electrode cycling is 5 A g−1.

Fig. 9 a Solid preparation process diagram. b Ragone plots of an ASC device (energy density vs. power density). c FE-SEM image of CoSe nanoparticles. d FE-SEM image of a CoSe-G nanohybrid. e, f FE-SEM image of Co0.85Se nanosheets on Ni foam. g CV curve range of ASC at different scanning rates: 5–100 mv s−1. h Electrochemical performance of Co0.85Se nanosheets, electrode cycling is 5 A g−1.

    Zhang et al. [79] used MOFs as a sacrificial template to prepare the CoSe2/C dodecahedron with an adjustable internal structure. The specific synthesis process is shown in Fig. 9a. As an electrode material for SCs, CoSe2/C composites have the advantages of a high specific capacity, high rate performance, and long-term stability. Gong et al. [80] grew mesoporous Co0.85Se nanosheets on foamed nickel as an SC electrode material by a simple hydrothermal method. The microscopic morphology of the Co0.85Se nanosheet coated on the Ni foam is shown in Fig. 9e, f. As shown in Fig. 9h, when the current density is 5 A g−1, the Co0.85Se nanosheets electrode material has a specific capacitance of 1378 F g−1 and still has 95.5% retention after 1000 cycles. Using AC as the anode material, the asymmetric configuration of the asymmetric SC prepared by using a Co0.85Se nanosheet as the cathode material can extend the voltage window to 1.6 V; moreover, the material exhibits higher power density, energy density, and coupling cycle stability. The results show that mesoporous Co0.85Se nanosheets are promising as SC materials.
3.2 Nickel Selenium
    Recently, researchers have begun to pay attention to materials such as transition metal oxides and sulfides when studying SC materials. Similar to oxygen and sulfur, selenium is also located in the sixth main group of the Periodic Table, and thus it has chemical and physical properties similar to those of oxygen and sulfur. Selenium exhibits better metal properties than sulfur so that transition metal selenides can be used in SCs [40–42]. NiSe is a promising electrode material, because it has various titanium oxides and good charge transfer conductivity [43, 44]. Therefore, we can improve the electrochemical properties of the electrode materials of SCs by controlling their morphology and structure [78].

Fig. 10 a Schematic representation of in situ growth of CoNi2S4@NiSe nanoarrays on compressed foamed nickel. b FE-SEM image of NiSe2/CFC. c SEM image of (Ni, Cu) Se2-0.30. d FE-SEM image of NiSe@MoSe2 nanosheet arrays. e SEM image of NiSe-0.20. f Ragone plot of SCs. g GCD curves for different doses of NISE-0.20 at different current densities. h Ragone plot of SCs. i Electrochemical performance of ASCs based on NiSe microspheres and NiSe microsphere discharge specific capacitance curves. j Flexible SC based on NiSe@nickel foam has a cycle performance of 1000 cycles at a scan rate of 50 mV s−1. k Areal capacitance dependence on scan rates of flexible SCs based on the NiSe@nickel and CoNi2S4@NiSe@nickel foam.

Fig. 10 a Schematic representation of in situ growth of CoNi2S4@NiSe nanoarrays on compressed foamed nickel. b FE-SEM image of NiSe2/CFC. c SEM image of (Ni, Cu) Se2-0.30. d FE-SEM image of NiSe@MoSe2 nanosheet arrays. e SEM image of NiSe-0.20. f Ragone plot of SCs. g GCD curves for different doses of NISE-0.20 at different current densities. h Ragone plot of SCs. i Electrochemical performance of ASCs based on NiSe microspheres and NiSe microsphere discharge specific capacitance curves. j Flexible SC based on NiSe@nickel foam has a cycle performance of 1000 cycles at a scan rate of 50 mV s−1. k Areal capacitance dependence on scan rates of flexible SCs based on the NiSe@nickel and CoNi2S4@NiSe@nickel foam.

    Recently, Peng et al. [79] used a one-step hydrothermal method to synthesize nickel foam (NF) as a nickel precursor and a nucleation skeleton to synthesize a novel positive electrode material NiSe@ MoSe2 with a uniform vertical nanoarray structure and a high specific capacity. The microstructure of NiSe@MoSe2 is shown in Fig. 10d. We constructed a new NiSe@ MoSe2//N-PMCN ASC device using an N-PMCN electrode and a NiSe@MoSe2 nanosheet with excellent electrochemical properties and a unique spatial structure. The stability of the ASC device fabricated at the operating potential window of 1.65 V is very good, with a high energy density of 32.6 Wh kg−1 at a power density of 415 W kg−1. Furthermore, the capacity retention after 5000 cycles was 91.4%. This study shows that the establishment of stable heterostructures in promising electrode materials has much potential, and a new approach has been proposed to fabricate ASCs in low-cost biomass carbon materials. Capacitor assemblies are fabricated on the basis of high-performance Faraday electrode materials. Based on this research, Tian et al. [88] synthesized a NiSe nanorod array (NiSe NRA/NF) on an NF material by a one-step hydrothermal method. The microstructure is shown in Fig. 10e. When the current density is 5 mA cm−2, it has an ultrahigh specific capacitance of 6.81 F cm−2 (Fig. 10g). An ASC was assembled by using NiSe as a positive electrode and RGO as a negative electrode. The energy density was 38.8 Wh kg−1 at a power density of 629 W kg−1. The energy density was 6.38 Wh kg−1 at a power density of 13.5 kW kg−1 (Fig. 10f). Moreover, at a high current density of 3.6 A g−1, the device remained at 90.09% after 3000 cycles, thereby showing promise for applications. However, Chen et al. [89] used a simple one-step hydrothermal NF to prepare (Ni, Cu) Se2 nanowires for use as positive electrodes for ASCs. Their microscopic topography is shown in Fig. 10c. An (A, Cu) Se2 nanowire/NF was used as a positive electrode and RGO was used as a negative electrode to assemble an ASC with an energy density of 6.53 Wh kg−1 at a power density of 9796.7 W kg−1 (Fig. 10h). After 4000 cycles of an ultrahigh current density of 50 mA cm−2, the energy density remained at 97.56%. As far as we know, this is the first (Ni, Cu)Se2 SC/ASC. For large-scale practical SCs, this work may motivate researchers to study transition metal selenides and metal selenides. This design generates new interest. In addition, prior to the above studies, many researchers attempted different methods to synthesize nickel selenide-based compounds for use in SCs; for example, Bao et al. prepared a nickel selenide/carbon fiber cloth (NiSe2/CFC) flexible electrode by a simple and effective electrodeposition method at room temperature. As seen from Fig. 10b, large particles of NiSe2 uniformly cover carbon fibers. Owing to the high conductivity of NiSe2 nanostructures, the synthesized electrodes have excellent rate performance, high specific capacitance, and perfect tantalum capacitance. NiSe2/CFC electrodes have a higher rate performance in a three-electrode system (the performance ratio varies between 1058 and 996.3 F g−1 when the current density varies between 2 and 10 A g−1). In addition, the power density and energy density of the ASC composed of the AC electrode and the NiSe2/CFC electrode were 800 W kg−1 and 32.7 Wh kg−1, respectively. The ASC can still maintain 86% capacitance after 2000 cycles, with good durability and cycle stability. Therefore, the use of NiSe2/CFC as an electrode for a flexible energy storage device is very promising [90]. The reversible redox reaction mechanism of NiSe can be expressed as follows:

NiSe2 + OH↔ NiSe2OH + e−                                                 (23)
NiSe2OH + OH↔ NiSe2O + H2O + e−                                 (24)

    For the purpose of designing and manufacturing flexible SCs with high-performance electrode materials, Tang et al. [91] used a three-step hydrothermal method to synthesize a layered CoNi2S4@NiSe nanoarray in situ on compressed foamed nickel. The synthesis method is shown in Fig. 10a. A flexible SC based on a CoNi2S4@NiSe nanoarray had high surface capacitance (surface capacitance 312.95 mF cm−2 at a scan rate of 5 mV s−1) (Fig. 10k) and good cycle stability (1000 cycles). In addition, the capacitance retention rate was 97.59% (Fig. 10j). It also has excellent electrochemical Al stability and maintains good capacitance even under bending conditions. The layered structure of the CoNi2S4@NiSe nanoarray makes high-performance flexible SCs one of the most promising electrode materials.
    Guo et al. [92] prepared a layered nanosheet-based NiSe microsphere by a simple hydrothermal method. The nanochip-based NiSe microspheres exhibited excellent electrochemical properties when used as an electrode material for an SC (the specific capacitance at a current density of 0.5 A g−1 was 492 F g−1). In addition, an ASC with a specific capacitance of 80 F g−1 at a current density of 0.2 A g−1 was successfully fabricated using the previously prepared material (Fig. 10i). This work greatly enriches the knowledge on the types of SC electrode materials and provides effective guidance for the practical application of NiSe electrode materials. The redox mechanism of NiSe in an aqueous alkaline solution can be expressed as:

NiSe + H2O + 1/2O2 → Ni(OH)2 + Se                                  (25)
Ni(OH)2 + OH⇆ NiOOH + H2O + e‑                                         (26)

3.3 Bimetallic Selenium
    Researchers have studied various metal complexes and found that when multiple metals are present, there may be mutual promotion. Yang et al. [93] developed a series of methods for in situ growth in a (NixCo1−x)9Se8 solid solution. When the current density is 5 A g−1, the (NixCo1−x)9Se8 nanocrystal has a specific capacitance of 3566 F g−1 after 5000 cycles. The assembled flexible (Ni0.1Co0.9)9Se8@CFC//PVA/KOH//rGO@CFC device with ultrahigh energy density was better than the recently reported tantalum capacitor based on nickel–cobalt S and selenide counterparts. These (NixCo1−x)9Se8 nanodendrites may also be efficient and robust electrocatalysts for hydrogen evolution reaction (HER) and bulk water splitting. Further research on the electrocatalytic performance is still in progress. Using the one-step hydrothermal method, Chen et al. [94] synthesized electrode materials with similar hollow structures but different NiSe and CoSe ratios. When such an electrode material was used for an energy storage active material with a positive electrode, it was found that the NiSe–CoSe sample exhibited excellent electrochemical activity in the alkaline electrolyte. Owing to the synergistic effect between NiSe and CoSe, we adjust the electrochemical performance by adjusting their ratio. The experimental results show that when the NiSe to CoSe ratio is 4:2, the NiSe–CoSe sample exhibits the best electrochemical performance as an electrode material. In addition, the hybrid SC has higher power and energy densities (the energy density is 41.8 Wh kg−1 at a power density of 750 W kg−1; at a power density of 30 kW kg−1, the energy density is 20.3 Wh kg−1). Zhang et al. [95] synthesized a Co0.85Se nanosheet array consisting of uniform (3–5)-nm ultrasmall Co0.85Se nanocrystals by one-step electrodeposition. In addition, it was also demonstrated that a 3D layered Co0.85Se@NiCo2S4 was designed and fabricated on graphene foam (GF) with a capacitance of 10 F cm−2 at a scan rate of 1 mV s−1. When the current density is zero, it has surface capacitance values of 5.25 and 2.65 F cm−2. In addition, the constructed flexible solid-state ASC device has good power and energy densities within the 1.55-V electrochemical potential window. The solid-state ASC device still has a capacitance retention rate of 89.0% after 10000 cycles, and it can be observed that the device has excellent electrochemical stability. The successful construction of Co0.85Se on NiCo2S4 nanotube arrays on GF opens the possibility of selectively depositing transition metals on various 3D substrates.
3.4 Summary
    As a new type of electrochemical energy storage device, SCs have attracted considerable attention from researchers. The employed material is the key factor in determining the performance of the device. The discussion above elucidated studies on the application of iron–cobalt–nickel-based materials in SCs. The data in Table 2 show that the spatial structure of the sample has significant influence on the performance of the SC. Materials with a dual-core structure show better electrochemical performance than those with a mononuclear structure and a solid material. The spatial structure of the material determines the surface area and pore volume of the material to some extent. Therefore, it has a certain influence on the electron transfer and redox field, which in turn affect the electrochemical properties of the material. In addition, the consistency of the multimetal can also improve the electrochemical performance of the SC to some extent.

Table 2 Transition metal sulfides based on graphene or graphene derivatives for SCs

11 40 table2

4 Electrocatalysis

4.1 Oxygen Reduction Reaction
    The ORR is an important part of electrochemical energy conversion, and requires four electrons for a given catalyst. In recent years, it has been found that transition metals such as Mn [96], Fe [97, 98], Co [99, 100], Ni [101, 102], and Cu [103] and heteroatom dopants B [104], N [105, 106], P [107, 108], S [109, 110], and Se [111] can change the catalytic properties of various carbon materials, including CNTs, amorphous carbon, and graphene. This drove many researchers to study and develop nonprecious metal catalysts. Owing to their high selectivity to the ORR in acidic and basic media, transition metals have good electrocatalytic activity.
4.1.1 Cobalt Selenium
    Compared with the corresponding bulk samples, the advantages of ultrathin nanosheets are more prominent. Ultrathin nanosheets have relatively novel physical properties and electronic structures. However, they still have certain challenges owing to the inherent forces driving the anisotropic growth of 2D structures. Zhang et al. [112] used a simple thermal solvent method to synthesize a large ultrathin single-crystal Co0.85Se nanosheet with a thickness of 3 nm in situ on a graphitized graphene (GO) plate (Fig. 11a). The synergistic chemical coupling between GO and Co0.85Se in the Co0.85Se/GO nanocomposites showed the highest catalytic performance of the ORR cobalt chalcogenide-based catalysts (Fig. 11g). In addition, the Co0.85Se/GO hybrid nanoparticle can promote rapid decomposition of hydrazine hydrate (97% of the hydrazine hydrate degrades in 12 min), and its degradation rate can be kept constant for 10 consecutive cycles; therefore, Co0.85Se/GO nanocomposites have the potential to act as catalysts for a long time. Super et al. [113] combined CoSe2 with nitrogen-doped carbon in several catalysts. Among them, the CoSe2/N–C catalyst synthesized at 400 °C showed the highest activity. CoSe2/N–C has an active carrier N–Cm, which has high stability and short activity decay. In the 0.5-M H2SO4 electrolyte, the half-wave potential (E1/2) of the N-carbon decreased from 0.667 to 0.636 V after 1000 cycles, whereas the E1/2 value of the active substance CoSe2/N-C decreased from 0.711 to 0.644 V. In contrast, the E1/2 value of CoSe2/C decreased from 0.681 to 0.475 V (Fig. 11f). Some researchers have synthesized compounds related to cobalt selenide by heating and studied their ORR activity. Zhao et al. [114] were the first to heat elemental selenium and hexadecylcarbonyltetracobalt [Co4(CO)12] under reflux conditions in the 1,6-hexanediol solvent to synthesize Co-based selenide with various selenium contents. The experimental results show that cobalt-based selenium exhibits excellent electrochemical stability in the potential range of 0.05–0.80 V (vs. NHE). In Fig. 11b, the microtopographies c and d show that the sample exhibits a surface morphology similar to broccoli and shows the crystalline character of the orthogonal CoSe2 compound. The experimental results show that, in the electrolyte solution of 0.5 M H2SO4, the catalytic activity is the highest when the content of Se is 67.1 mol% and the OCP value is 0.79 V (NHE). A Tafel slope of −60 mV dec−1 and a transfer coefficient of 0.49 were obtained in the kinetic control region. Therefore, the main factor affecting the performance of the co-selenium chalcogenide catalyst may be the modification of selenium on the metal structure of the metal cobalt. Subsequently, Nekooi et al. [115] microwaved sodium selenite and cobalt (II) acetate in a glycerol solution to synthesize a CoSe catalyst supported on nanoporous carbon. The current amplitude and the initial potential of the ORR have almost the same effect on 20 wt% CoSe/C in the presence and absence of these fuels. Because oxidation and oxygen reduction occur simultaneously, the Pt/C catalyst exhibits a mixed potential while causing the initial potential of the ORR to decrease at approximately 0 °C. The electrochemical measurements indicate that the synthesized CoSe/C catalyst has a four-electron transfer mechanism of ORR. The above results indicate that electrocatalysts, which have various fuel capacities, low cost, and nearly complete tolerance, are suitable for use in mixed and conventional reaction fuel cells fueled with low-molecular-weight alcohols or formic acid. However, Zhu et al. [116] prepared a Co–Se film by magnetron sputtering. The film showed remarkable activity for ORR. The film has been shown to contain Co–Se nanocrystals embedded in a Se-rich matrix (Fig. 11e). The structure of the Co–Se nanocrystals participating in the ORR is different from the structure based on the Chevrel phase. For the Co–Se catalyst, the questions of how the Co1−xSe nanocrystallites are related to the active site of electron transfer and how the surrounding Se enrichment contributes to the entire ORR process remain open.

Fig. 11 a Schematic diagram of the synthesis of ultrathin Co0.85Se/graphene nanocomposites. SEM micrograph of synthesized Co–Se catalyst powder b 31.7 mol% Se, c 67.1 mol% Se. d 70.9 mol% Se. e In progressively enlarged magnified image, the slice sample of the component Co (44%) Se (56%). f Stabilities of CoSe2/N–carbon catalysts. The activity decay after 1000 CV cycles, DE1/2, is marked on the graph. g RDE curve of Co0.85Se/graphene (loaded approximately 0.1 mg cm−2) in O2−-saturated 0.1 M KOH was 10 mV s−1 at different speeds.

Fig. 11 a Schematic diagram of the synthesis of ultrathin Co0.85Se/graphene nanocomposites. SEM micrograph of synthesized Co–Se catalyst powder b 31.7 mol% Se, c 67.1 mol% Se. d 70.9 mol% Se. e In progressively enlarged magnified image, the slice sample of the component Co (44%) Se (56%). f Stabilities of CoSe2/N–carbon catalysts. The activity decay after 1000 CV cycles, DE1/2, is marked on the graph. g RDE curve of Co0.85Se/graphene (loaded approximately 0.1 mg cm−2) in O2−-saturated 0.1 M KOH was 10 mV s−1 at different speeds.

4.1.2 Iron Selenium
    Some researchers have fabricated a series of carbon-loaded FeSe2 nanoparticles by adjusting the iron to Se ratio, synthesized iron selenide-related compounds by the microwave method, and explored a series of their properties. Zheng et al. [117] used selenium dioxide (SeO2) and FeC2O4•2H2O as precursors to carry different molar ratios of Se/Fe on FeSe2 nanoparticles by the microwave method. Electrochemical experiments showed that when the Se to Fe ratio was changed from 2.0 to 4.0, the ORR potential changed from 0.781 to 0.814 V, and the electron transfer number changed from 3.3 to 3.9 (Fig. 12a). When FeSe2 is further reduced, Fe and Se are present on the surface of FeSe2/C. The degree of graphitization of the carbon support and the number of active sites of the ORR are weakly related to the Se/Fe ratio. However, in the current work, Ezeta et al. [118] used high-energy mechanical alloying to synthesize high-purity powders (Ru, Se, and Mo) into Ru–Mo–Fe and Ru–Se–Fe alloy nanoparticles. The Tafel parameter of the RDE results indicates that there is a primary ORR in both electrocatalytic systems to form water owing to a 4e-global multielectron transfer (Fig. 12f). The results of the electrocatalysis indicate that mechanical alloying is advantageous for obtaining nanoparticle electrocatalysts with good ORR properties. However, some researchers have synthesized iron selenide-related compounds by hydrogen annealing of carbonyl precursors and conducted a series of investigations on their properties. Chiao et al. [119] synthesized a Ru1−xFexSey/C (x = 0.0–0.46, y = 0.4–1.9) catalyst by the hydrogen annealing of a carbonyl precursor. Here, we explore three factors that influence the catalytic activity of Ru1−xFexSey/C. The substitution of metal Fe has the advantages of reducing the material cost, enhancing the activity of ORR, and increasing the yield of H2O2. The stability test results of Ru0.54Fe0.46Se1.9/C and RuSe2.0/C were obtained. The former had a higher activity decay rate than that of the latter (Fig. 12 b-e). However, both catalysts had higher durabilities than that of the RuSecluster/C (Ru: Se = 1:0.3) agglomerated catalyst without annealing. By comparing the activity of the product, peroxide yield, and stability, the Ru0.54Fe0.46Se1.9/C catalyst can be used as an effective ORR catalyst in a fuel cell.

Fig. 12 a RDE polarization curves of Pt/C (dashed line) and FeSe2/C (solid lines) prepared with different Se/Fe ratios in O2 saturated 0.1 mol L−1 KOH solution at 1600 rpm. b CV scan was subjected to electrocatalyst stability test at 50 mV sL−1. c Electrocatalyst stability tests O2 reduction current at 10 mV sL−1 and 1600 rpm was Ru0.54Fe0.46Se1.9/C. d CV scan was subjected to electrocatalyst stability test at 50 mV sL−1. e Electrocatalyst stability test O2 reduction current of RuSecluster/C (Se:Ru = 0.3:1) at 10 mV sL−1 and 1600 rpm. f ORR Tafel graphs.

Fig. 12 a RDE polarization curves of Pt/C (dashed line) and FeSe2/C (solid lines) prepared with different Se/Fe ratios in O2 saturated 0.1 mol L−1 KOH solution at 1600 rpm. b CV scan was subjected to electrocatalyst stability test at 50 mV sL−1. c Electrocatalyst stability tests O2 reduction current at 10 mV sL−1 and 1600 rpm was Ru0.54Fe0.46Se1.9/C. d CV scan was subjected to electrocatalyst stability test at 50 mV sL−1. e Electrocatalyst stability test O2 reduction current of RuSecluster/C (Se:Ru = 0.3:1) at 10 mV sL−1 and 1600 rpm. f ORR Tafel graphs.

4.2 Hydrogen Evolution Reaction
4.2.1 Cobalt Selenium
    It is well known that it is very difficult to increase the activity and stability of an electrocatalyst in the HER. Dai et al. [120] reported a facile method for synthesizing CoSe2 hollow microspheres using organic Se sources. Because the surface of CoSe2 with a hollow structure is rough, it is easy to expose the material to a more active site, thereby achieving good HER activity (the Tafel slope is 55 mV dec−1) (Fig. 13e). Because the hollow structure promotes the activity of the electrocatalyst, researchers hope to further improve the catalytic activity of the CoSe2 electrocatalyst by changing the conditions without changing the hollow structure. Additionally, it is clear that the addition of graphene does not change the hollow structure (Fig. 13g-i). The addition of graphene can significantly improve the HER activity of CoSe2; however, the increase in the graphene content reduces the performance of the catalyst (Fig. 13f). The excellent HER activity of CoSe2@G is attributed to the critical structure–function coupling effect. In addition, CoSe2@G nanocomposites and CoSe2 have high stability and durability, and because of their unique structure, they are expected to be widely used in the fields of optics, catalysis, sensors, and electronics. For the first time, Chen et al. [121] proposed a lateral heterostructure (LH) and a defective 2D stepped MoSe2/CoMoSe by adding an iso-doped Co to a MoSe2 nanofilm under high-temperature conditions, which is known as the method of double layering of hair. LH and vertical heterostructure (VH) nanolayers of MoSe2/CoMoSe are shown in Fig. 13a. MoSe2/CoMoSe LH and VH have an overpotential of 305 mV at a minimum current density of 10 mA cm−2, indicating that the HER activity is optimal (Fig. 13c). MoSe2/CoMoSe LH and VH have a minimum Tafel slope of −95.2 mV dec−1 (Fig. 13d). This method is a simple and reliable technique for doping other metals into the 2D TMDCS atomic layer to create new alloy nanolayers to obtain new LHs or VHs on different substrates. Let us now consider the next generation of HER electrocatalysts. HER electrocatalysts with low overpotential and robust stability are among the most daunting challenges in energy conversion. Zhou et al. [122] synthesized CoSe2 nanoparticles embedded in defective carbon nanotubes (CoSe2@DC) by a three-step carbonation–oxidation–selenization reaction. The specific synthesis process is shown in Fig. 13b. CoSe2 nanoparticles, as a core of CoSe2@DC, partially embedded in defective carbon nanotubes, exhibit excellent HER activity, with a low initial potential of ~40 mV for RHE, a high current density (132 mV, 10 mA cm−2), and Tafel slope stability. The metal@carbon preoxidation strategy reported herein can expose the active sites of the core while maintaining the porous carbon skeleton, which has greater potential for application in electrocatalytic reactions.

Fig. 13 a Schematic representation of the formation of defective 2D platform MoSe2/CoMoSe LH and LH and VH nanomolecules. b Schematic diagram of the synthesis process of CoSe2@DC. c Electrochemical catalytic performance of 2D triangular MoSe2 monolayers, defective 2D platform MoSe2/CoMoSe LH, LH, and VH nanofilms on gas chromatographic electrodes. Polarization curve after infrared correction. d Electrochemical catalytic performance of 2D triangular MoSe2 monolayers, defective 2D platform MoSe2/CoMoSe LH, LH and VH nanofilms on gas chromatographic electrodes. Tafel plot. e Corresponding Tafel slope of CoSe2 and Pt. f Polarization curves of CoSe2@G1, CoSe2@G2, and CoSe2@G3. g FE-SEM image of CoSe2@G1. h FE-SEM image of CoSe2@G2. i FE-SEM image of CoSe2@G3.

Fig. 13 a Schematic representation of the formation of defective 2D platform MoSe2/CoMoSe LH and LH and VH nanomolecules. b Schematic diagram of the synthesis process of CoSe2@DC. c Electrochemical catalytic performance of 2D triangular MoSe2 monolayers, defective 2D platform MoSe2/CoMoSe LH, LH, and VH nanofilms on gas chromatographic electrodes. Polarization curve after infrared correction. d Electrochemical catalytic performance of 2D triangular MoSe2 monolayers, defective 2D platform MoSe2/CoMoSe LH, LH and VH nanofilms on gas chromatographic electrodes. Tafel plot. e Corresponding Tafel slope of CoSe2 and Pt. f Polarization curves of CoSe2@G1, CoSe2@G2, and CoSe2@G3. g FE-SEM image of CoSe2@G1. h FE-SEM image of CoSe2@G2. i FE-SEM image of CoSe2@G3.

4.2.2 Iron Selenium
    Although there have been relatively fewer studies on iron selenide in HER, some researchers have recently synthesized and characterized a series of compounds related to iron selenide. Chang et al. [123] used a simple solvothermal method to synthesize 3D FeSe2 microfluid. The Se powder and FeCl2•4H2O were used as the raw materials and ethanolamine as the solvent. The band gap of the product and its photoluminescence properties are discussed. The results show that this sample exhibits excellent catalytic activity, indicating that these systems can be enriched in the HER catalyst family. The FeSe2 microfluid is a substance composed of nanosheets and has a thickness of 50–80 nm. The characteristic peak of the Se–Se vibration mode is shown on the Raman spectrum. The optical band gap was 1.48 eV when measured by the UV–visible absorption spectroscopy. The researchers also explored the catalytic activity of FeSe2 microfluids for hydrogen evolution and its photoluminescence properties. Finally, the possible growth mechanism of FeSe2 microfluids is proposed.
4.2.3 Bimetallic Selenium
    Some researchers have explored the catalytic performance of HER by synthesizing ultrathin nanosheets of bimetallic selenide. Xiao et al. [124] first reported the synthesis of microspheres prepared from cobalt–iron–selenium ultrathin nanosheets as an electrocatalyst to HER. Because the prepared cobalt–iron–selenium ultrathin nanosheet microspheres have a high specific surface area, the cobalt–iron–selenium ternary compound exhibits a high HER electrocatalytic activity and low initial potential in an acidic medium. The presence of multiwalled CNTs improves the immobilization effect of the synergistic iron–selenium catalyst and the electron transfer between the catalyst and the electrode surface, thereby improving the stability and HER electrocatalysis. Nonprecious metal-based ferrous Se ternary compounds obtained from the rich elements of the earth can provide insights into new ways to explore hydrogen's cost-effective catalysts for hydrogen energy development.
4.3 Oxygen Evolution Reaction
    The characteristics of inorganic nanowire arrays make them great prospects for the next generation of energy conversion and storage devices. Therefore, improved understanding of the nanowire growth mechanism is of significance for the expansion of nanowire applications. Du et al. [125] demonstrated the solvent thermal synthesis of Ni3Se4 and (Ni, Fe)3Se4 and the morphology of ultrathin nanometer tablets with efficient oxygen precipitation. The (Ni, Fe)3Se4-based solution has a small Tafel slope of 41 mV dec−1 at 25 mV, 10 mA cm−2. This is the first study on Ni3Se4-based double transition metal materials. As a catalyst for OER, it has an ultrathin nanosheet morphology and remarkable electrocatalytic activity, which is very promising for achieving high efficiency and long-term stability. Yu et al. [126] produced 3D mesoporous Ni0.76Fe0.24Se on NF by two successive hydrothermal methods. The prepared Ni0.76Fe0.24Se has an excellent superpotential, Tafel slope, and excellent stability in the alkaline solution. The simple synthetic route proposed here could also inspire the development of other transition metal selenides, sulfides, and phosphating materials for further applications. Rose et al. [127] synthesized a CoP-CoSe2|CoP metal phosphating and CoSe2 metal sulfide mixed catalyst to elucidate their active form. The material exhibited excellent OER activity when subjected to a low overpotential of 240 mV, current density of 10 mA cm−2, and Tafel slope of 46.6 mV dec−1. This research not only laid the foundation for the development of OER complex mixed catalysts but also revealed the real active species in TMC/TMP.
4.4 OER and HER
    Conversion of the electrical energy output from renewable sources into chemical fuels (i.e., oxygen and hydrogen) is a promising strategy for electrochemical conversion. Furthermore, the decomposition of total electrochemical water has received considerable attention from researchers. The development of low-cost and highly active electrocatalysts is a key challenge associated with overall water splitting. To date, however, only a few materials have been able to catalyze two reactions in the same electrolyte simultaneously. Hou et al. [128] synthesized a vertically oriented Co0.85Se nanosheet by in situ growth on an electrochemically stripped graphene foil and constructed the material into a 3D strongly coupled ternary hybrid electrode. The deposited NiFe layered double hydroxide was then further processed by the hydrothermal method. The obtained 3D fractionated mixture had the advantages of high surface area, strong coupling effect of 156 m2 g−1, and excellent catalytic activity for OER. Overvoltage values of only 1.50 and 1.51 V were required to obtain current densities of 150 and 250 mA cm−2, respectively. These overpotentials are much lower than those reported for Ir/C catalysts and nonprecious metals.
4.5 Others
    Hollow and hybrid nanomaterials have novel electrocatalytic properties that make them excellent electrocatalysts compared to homogeneous solid nanostructures. Zhang et al. [129] synthesized a series of NiSe–Ni3Se2/RGO with hollow hexagonal nanodisk morphologies on graphene by controlling the heat treatment duration of the solvent. As shown in Fig. 14c, NiSe–Ni3Se2/RGO has a unique hollow and mixed structure. The electrocatalytic performance of NiSe–Ni3Se2/RGO with a hollow nanorod structure is better than that of NiSe/RGO and the solid NiSe–Ni3Se2/RGO nanostructures (Fig. 14f). Furthermore, as shown in Fig. 14e, the NiSe–Ni3Se2/RGO nanodisk with a hollow structure has a higher PCE and lower charge transfer resistance than Pt, and the electrochemical performance of NiSe–Ni3Se2/RGO is far better than that of other Pt-based devices. Xu et al. [130] synthesized a series of hexagonal nickel selenide nanowires by solution–liquid–solid (SLS) processing using nonmetallic molecular crystals as catalysts and successfully introduced SLS into the conventional low-temperature solution field. NiSe nanowire arrays were used as catalysts for electrochemical water oxidation as proof-of-concept applications. The experimental results show that NiSe nanowire arrays exhibit excellent stability and high activity. Kim et al. [131] investigated the redox chemistry of Se on magnetite under environmentally relevant EH and pH conditions (+0.85 to approximately 1.0 V vs. Ag/AgCl; pH 4.0–9.5). The Se redox peak was found by a CV experiment at pH 4.0–8.0. A reduction peak of width approximately 0.5 V indicates a multielectron transfer process of a disproportionation reaction between selenite and Se(0) and Se(-II) and Se(-II) and selenium(IV). In chronoamperometry, when potential P is greater than or equal to −0.6 V, the current–time transient shows a good linear relationship on the log–log scale. However, when the negative potential is larger, a deviation from the linear tendency is observed. The above results indicate that the nucleation and growth of Se(0) on the surface of magnetite can be explained by a progressive nucleation model. Some researchers have synthesized iron-related selenides by a three-step hydrothermal method and carried out a series of characterizations to explore their applications in electrocatalysis. Joe et al. [132] synthesized FeSe–Pt@SiO2 nanosphere nanoreactor by a simple three-step assembly method (Fig. 14a). An analysis of the microstructure of FeSe–Pt@SiO2 shows that it is composed of regular spheres with smooth surfaces (Fig. 14d). The study of its materials shows that FeSe–Pt@SiO2 nanospheres have both intrinsic glucose oxidase (GOx−) and peroxidase mimetic activity. Therefore, the researchers designed high stability based on nanostructures and a highly active artificial enzyme cascade system. It is worth noting that FeSe–Pt@SiO2 nanospheres can act as powerful nanoreactors to catalyze the self-organizing cascade. The high detection sensitivities of 0.227 and 1.136 nm were used to detect the color of FeSe–Pt@SiO2 nanospheres owing to their performance. FeSe–Pt@SiO2 nanospheres are expected to be applied as an enzyme mimetic in the field of diagnostics and biotechnology. Li et al. [133] synthesized a univalent Ni–Co–Se alloy-controlled hollow microsphere by a one-step hydrothermal method and used it as a CE material for DSSCs, which has excellent electrocatalytic activity. Ni–Co–Se-180 CE has the highest current density, lowest overpotential, and smallest charge transfer resistance compared with those of the other CE and Pt CE. Batteries with Ni–Co–Se-160, Ni–Co–Se-180, and Ni–Co–Se-200-based CEs achieved high efficiencies of 8.39%, 9.04%, and 8.72%, respectively, which are all higher than that of Pt CE (8.07%). This study shows that ternary Ni–Co–Se-based alloys can be used as low-cost and high-efficiency CEs in DSSCs.

Fig. 14 a Preliminary synthesis and enzyme cascade mechanism of FeSe-Pt@SiO2 nanohybrids. b Visible light drives H2 evolution of RuP–TiO2-H2ase. TEM image of c NiSe–Ni3Se2/RGO–HD and d FeSe–Pt@SiO2 microspheres. e Nyquist diagram of symmetrical elements made with NiSeNi3Se2/RGO series and Pt CE. f Tafel polarization curves of NiSeNi3Se2/RGO series and Pt CE symmetric cells I−/I3−.

Fig. 14 a Preliminary synthesis and enzyme cascade mechanism of FeSe-Pt@SiO2 nanohybrids. b Visible light drives H2 evolution of RuP–TiO2-H2ase. TEM image of c NiSe–Ni3Se2/RGO–HD and d FeSe–Pt@SiO2 microspheres. e Nyquist diagram of symmetrical elements made with NiSeNi3Se2/RGO series and Pt CE. f Tafel polarization curves of NiSeNi3Se2/RGO series and Pt CE symmetric cells I/I3−.

    Some scientists have explored the synthetic structure model of the [NiFeSe] hydrogenase active site and conducted a series of investigations on photocatalytic hydrogen production. Recently, Erwin et al. [134] reported that D. baculatum [NiFeSe]–H2ase adsorbed on TiO2 nanoparticles has an unusual electrocatalytic stability. As proof of its applicability and concept, we assembled a photocatalytic H2 production system driven by visible light consisting of a hydrogenase directly adsorbed on dye-sensitized TiO2 nanoparticles. The catalytic process of visible light is shown in Fig. 14b. The useful properties of [NiFeSe]–H2ase from D. baculatum, especially its stability to TiO2 and some O2 tolerance to H2, should allow us to extend our work to include biohydrolysis water oxidation catalysts. Prior to this, Wombwell et al. [135] reported a synthetic structural model for the [NiFeSe] hydrogenase active site. Comparing [NiFe('S2Se2')(CO)3] with previously reported thiolate analogs, the results show the selenate group in [NiFe('S2Se2')(CO)3]. In the infrared light, the lower carbonyl stretching frequency is not produced in the spectrum. Electrochemical studies on [NiFe('S2Se2')(CO)3] and [NiFe('S4')(CO)3] show that neither of these two complexes is a homogeneous H2 precipitation catalyst, but rather a solid deposit is produced on the surface of the electrode for H2 precipitation catalysis in organic and aqueous solutions.
4.6 Zn–Air Batteries

    Recently, significant progress has been made in high-performance electrocatalysts. Therefore, metal–air electric devices and hydraulic decomposition devices will become electrocatalysts for efficient clean energy technology in OER, ORR, HER, or OER rechargeable metal–air batteries. They play a key role in water decomposition to reduce overpotentials and accelerate reaction kinetics [128–131]. Metallic selenides (MxSe, M = Co, Ni, and Fe) have inherent conductive metal properties that ensure efficient electron transfer during electrocatalysis. Therefore, the catalytic properties of transition metal oxides and transition metal sulfides are more effective than those of the sulfides [132–136]. Zheng et al. [137] synthesized NixSe (0.5 ≤ x ≤ 1) nanocrystals with different crystal compositions by using rapid environmental-pressure thermal injection. Among the series of synthesized NixSe, cubic Ni0.5Se has excellent OER catalytic activity. However, Ni0.75Se exhibits better HER and ORR properties and higher catalytic durability than that of noble metal catalysts in alkaline media. Owing to the excellent electrocatalytic performance of the half-reaction, the Ni0.75Se and Ni0.5Se electrodes achieved further assembly of the rechargeable zinc–air battery and overall water decomposition. The electrochemical tests showed low overpotential and high cycle efficiency and stability.
4.7 Summary
    By looking at the data in Table 3, we can compare the performances of iron, cobalt, and nickel selenium in electrocatalysis. By summarizing the above-mentioned articles on electrocatalysis, we can see that the current research on catalysts mainly focuses on ultrathin nanosheets. However, some scholars have also conducted research on the 3D nanoarray structure and have achieved certain results in this field. The 3D structured nanoarray can yield a larger number of active sites for the material, thereby increasing the catalytic activity of the electrocatalyst. We can also summarize the main ways to improve the electrocatalytic activity, as follows: (1) Increase in the number of active sites, design nanostructured catalysts, and increase in the contact area of the electrolyte. (2) A good catalyst support is prepared, such as preparing a nano array on C and N. This review demonstrates that the activity of the electrocatalyst can be improved by these two methods.

Table 3 Application of iron/cobalt/nickel selenium in electrocatalysis

11 40 table3

5 Conclusions and Future Outlook

    Electrode materials play a vital role in the field of electrochemical energy storage and conversion. Therefore, many electrode materials have been explored and developed to improve the energy storage performance and conversion efficiency. This exploration process not only lays a foundation for the storage and transformation mechanism of electrochemical energy but also points out important standards for good electrode materials. Obviously, the research on MxSey (M = Fe, Co, Ni) and their composite has made significant progress. The ultrasmall nanostructure and ordered 3D structure of transition metal selenides and their composite materials effectively improve the storage performance of electrochemical energy. MxSey (M = Fe, Co, Ni) are rich in electronic states and good electrical conductivity, and have also been reported as active materials for energy storage.
    However, the study of transition metal selenides and their composites for the future development process still faces enormous challenges. First, the electron conductivity and transition kinetics of transition metal selenides and their complexes are low. We can improve the poor electron conductivity and buffer volume by designing selenides with suitable microstructures. Second, hollow/porous structural materials have yielded large surface areas, and their preparation requirements are so stringent that the fabrication of such porous materials is fraught with challenges. To overcome this problem, we can synthesize nanoparticles to increase the contact area between the electrolyte and the material. A certain oxide layer may form on the surface of the material, thus affecting the reversible capacity. Li et al. [58] controlled the surface oxide by controlling the selenization process, and the prepared FeSe2 nanorod/graphene component produced almost no surface oxide, thereby exhibiting excellent electrochemical performance.
    Finally, the importance of MxSey (M = Fe, Co, Ni) in electrochemical energy storage and conversion is increasing. In the future, we can attempt to explore the effects of multielement transition metal selenides on electrochemical energy storage and conversion. In addition, these could be applied to other types of batteries (Li–S batteries, Li–O2 batteries, Li–Se batteries, and zinc Na–Se). The application performance of batteries can be studied. Despite challenges, the rapid developments in research on these materials have paved the way for further development of these new functional materials.

Acknowledgements

    This work was supported by the National Natural Science Foundation of China (NSFC-21671170, 21673203, and 21201010), the Top-notch Academic Programs Project of Jiangsu Higher Education Institutions (TAPP), Program for New Century Excellent Talents of the University in China (NCET-13-0645), the Six Talent Plan (2015-XCL-030), and Qinglan Project. We also acknowledge the Priority Academic Program Development of Jiangsu Higher Education Institutions and the technical support we received at the Testing Center of Yangzhou University.

 

References

[1] G.D. Park, J.S. Cho, Y.C. Kang, Sodium-ion storage properties of nickel sulfide hollow nanospheres/reduced graphene oxide composite powders prepared by a spray drying process and the nanoscale Kirkendall effect. Nanoscale 7(40), 16781–16788 (2015). https://doi.org/10.1039/C5NR04252F
[2] C. Zhang, Y. Huang, S. Tang, M. Deng, Y. Du, High-energy all-solid-state symmetric supercapacitor based on Ni3S2 mesoporous nanosheet-decorated three-dimensional reduced graphene oxide. ACS Energy Lett. 2(4), 759–768 (2017). https:// doi.org/10.1021/acsenergylett.7b00078
[3] P.R. Jothi, R.R. Salunkhe, M. Pramanik, S. Kannan, Y. Yamauchi, Surfactant-assisted synthesis of nanoporous nickel sulfide flakes and their hybridization with reduced graphene oxides for supercapacitor applications. RSC Adv. 6(25), 21246–21253 (2016). https://doi.org/10.1039/C5RA26946F
[4] T.T. Shan, S. Xin, Y. You, H.P. Cong, S.H. Yu, A. Manthiram, Combining nitrogen-doped graphene sheets and MoS2: A unique film–foam–film structure for enhanced lithium storage. Angew. Chem. Int. Ed. 55(41), 12783–12788 (2016). https://doi.org/10.1002/anie.201606870
[5] D. Xie, W. Yuan, Z. Dong, Q. Su, J. Zhang, G. Du, Facile synthesis of porous NiO hollow microspheres and its electrochemical lithium-storage performance. Electrochim. Acta 92, 8787–8792 (2013). http://doi.org/10.1016/j.electacta.2013.01.008
[6] L. Zhang, E. Drummond, M.A. Brodney, J. Cianfrogna, S.E. Drozda, S. Grimwood, M.A. Vanase-Frawley, A. Villalobos, Design, synthesis and evaluation of [3H]PF-7191, a highly specific nociceptin opioid peptide (NOP) receptor radiotracer for in vivo receptor occupancy (RO) studies. Bioorganic Med. Chem. Lett. 24(22), 5219–5223 (2014). http://doi.org/10.1016/j.bmcl.2014.09.069
[7] R. Kumar, M. Krishnaih, S. Yeob, A. Kumar, S. Hun, Binder-free, scalable hierarchical MoS2 as electrode materials in symmetric supercapacitors for energy harvesting applications. Mater. Lett. 236, 167–170 (2019). https://doi.org/10.1016/j.matlet.2018.10.009 
[8] J. Wu, L. Du, Y. Shao, X. Wu, Silicon quantum dots-assistant synthesis of mesoporous MoS2 3D frameworks ( SiQDs-MoS2 ) with 1T and 2H phases for hydrogen evolution reaction. Mater. Lett. 236, 124–127 (2019). https://doi.org/10.1016/j.matlet.2018.10.095
[9] N. Q. Hai, H. Kim, I. S. Yoo, J. Hur, Facile and scalable preparation of a MoS2 /carbon nanotube nanocomposite anode for high-performance lithium-ion batteries: effects of carbon nanotube content. J. Nanosci. Nanotechnol. 19(3), 1494–1499 (2019). https://doi.org/10.1166/jnn.2019.16154
[10] W. Li, J. Huang, L. Feng, L. Cao, Y. Liu, L. Pan, VS2 nanoarchitectures assembled by single-crystal nanosheets for enhanced sodium storage properties. Electrochim. Acta (2018). https://doi.org/10.1016/j.electacta.2018.08.049
[11] Z. Zhang, X. Huang, H. Wang, S. Hwa, T. Ma, Free-standing NiCo2S4@VS2 nanoneedle array composite electrode for high performance asymmetric supercapacitor application. J. Alloys Compd. 771, 274–280 (2019). https://doi.org/10.1016/j.jallcom.2018.08.325
[12] J.K. Das, A.K. Samantara, A.K. Nayak, D. Pradhan, J.N. Behera, VS2: an efficient catalyst for an electrochemical hydrogen evolution reaction in an acidic medium. Dalt. Trans. 47(39), 13792 (2018). https://doi.org/10.1039/C8DT02547A
[13] W. Hou, Y. Xiao, G. Han, The dye-sensitized solar cells based on the interconnected ternary cobalt diindium sul fi de nanosheet array counter electrode. Mater. Res. Bull. 107(July), 204–212 (2018). https://doi.org/10.1016/j.materresbull.2018.07.040
[14] Y. Pan, X. Cheng, Nanoflower-like N-doped C/CoS2 as high-performance anode materials for Na-ion batteries. Nanoscale 10, 20813–20820 (2018). https://doi.org/10.1039/c8nr06959j 
[15] S. Luo, C. Zheng, W. Sun, Y. Wang, J. Ke et al., Multi-functional CoS2-N-C porous carbon composite derived from metal-organic frameworks for high performance lithium-sulfur batteries. Electrochim. Acta 289, 94–103 (2018). https://doi.org/10.1016/j.electacta.2018.09.048
[16] M. Govindasamy, S. Shanthi, E. Elaiyappillai, S. Wang, P. M. Johnson et al., Fabrication of hierarchical NiCo2S4@CoS2 nanostructures on highly conductive flexible carbon cloth substrate as a hybrid electrode material for supercapacitors with enhanced electrochemical performance. Electrochim. Acta 293, 328-337 (2019). https://doi.org/10.1016/j.electacta.2018.10.051
[17] Q. Su, Y. Lu, S. Liu, X. Zhang, Y. Lin, R. Fu, Nanonetwork-structured yolk-shell FeS2@C as high-performance cathode materials for Li-ion batteries. Carbon 140, 433–440 (2018). https://doi.org/10.1016/j.carbon.2018.08.049
[18] S. Venkateshalu, P.G. Kumar, S.K. Jeong, A.N. Grace, Solvothermal synthesis and electrochemical properties of phase pure pyrite FeS2 for supercapacitor applications. Electrochim. Acta 290, 378-389 (2018). https://doi.org/10.1016/j.electacta.2018.09.027
[19] J. Jiang, L. Zhu, H. Chen, Y. Sun, W. Qian, H. Lin, S. Han, Highly active and stable electrocatalysts of FeS2–reduced graphene oxide for hydrogen evolution. J. Mater. Sci. 54(2), 1422–1433 (2019). https://doi.org/10.1007/s10853-018-2913-0
[20] H. Fang, T. Huang, J. Mao, S. Yao, M.M. Dinesh, Investigation on the catalytic performance of reduced-graphene-oxide-interpolated FeS2 and FeS for oxygen reduction reaction. ChemistrySelect 3, 10418–10427 (2018). http://doi.org/10.1002/slct.201800835
[21] G. Chen, X. Yao, Q. Cao, S. Ding, J. He, and S. Wang, Flexible free-standing SnS2/carbon nanofibers anode for high performance sodium-ion batteries. Mater. Lett. 234, 121-124(2019). https://doi.org/10.1016/j.matlet.2018.09.082
[22] M. Wang, Y. Huang, Y. Zhu, X. Wu, N. Zhang, H. Zhang, Binder-free flower-like SnS2 nanoplates decorated on the graphene as a flexible anode for high-performance lithium-ion batteries. J. Alloys Compd. 774, 601–609 (2019). https://doi.org/10.1016/j.jallcom.2018.09.378
[23] Y. Zhang, Y. Guo, Y. Wang, T. Peng, Y. Lu et al., Rational design of 3D honeycomb-like SnS2 quantum dots/rGO composites as high-performance anode materials for lithium/sodium-ion batteries. Nanoscale Res. Lett. 13, 389 (2018).  https://doi.org/10.1186/s11671-018-2805-x
[24] L. Yin, R. Cheng, Q. Song, J. Yang, X. Kong, J. Huang, Y. Lin, H. Ouyang, Construction of nanoflower SnS2 anchored on g-C3N4 nanosheets composite as highly efficient anode for lithium ion batteries. Electrochim. Acta 293, 408–418 (2019). https://doi.org/10.1016/j.electacta.2018.10.020
[25] J.S. Ross, S. Wu, H. Yu, N.J. Ghimire, A.M. Jones et al., Electrical control of neutral and charged excitons in a monolayer semiconductor. Nat. Commun. 4, 1473–1476 (2013). http://doi.org/10.1038/ncomms2498
[26] P. Zhao, H. Cui, J. Luan, Z. Guo, Y. Zhou, H. Xue, Porous FeS2 nanoparticles wrapped by reduced graphene oxide as high-performance Lithium-ion battery cathodes. Mater. Lett. 186, 62–65 ( 2017). http://doi.org/10.1016/j.matlet.2016.09.074
[27] L. Li, C. Gao, A. Kovalchuk, Z. Peng, G. Ruan et al., Sandwich structured graphene-wrapped FeS-graphene nanoribbons with improved cycling stability for lithium ion batteries. Nano Res. 9(10), 2904–2911 (2016). https://doi.org/10.1007/s12274-016-1175-x
[28] P. Simon, Y. Gogotsi, B. Dunn, Where do batteries end and supercapacitors begin?. Science 343(6176), 1210–1211 (2014). https://doi.org/10.1126/science.1249625
[29] T. Brousse, D. Belanger, J.W. Long, To be or not to be pseudocapacitive? J. Electrochem. Soc. 162(5), A5185–A5189 (2015). https://doi.org/10.1149/2.0201505jes
[30] L. Shen, Q. Che, H. Li, X. Zhang, Mesoporous NiCo2O4 nanowire arrays grown on carbon textiles as binder-free flexible electrodes for energy storage. Adv. Funct. Mater. 24(18), 2630–2637 (2014). https://doi.org/10.1002/adfm.201303138
[31] J. Lee, G. Ali, D. H. Kim, and K. Y. Chung, Metal-organic framework cathodes based on a vanadium hexacyanoferrate prussian blue analogue for high- performance aqueous rechargeable batteries. Adv. Energy Mater. 7, 1601491 (2016). https://doi.org/10.1002/aenm.201601491
[32] M.H. Alfaruqi, S. Islam, D.Y. Putro, V. Mathew, S. Kim et al., Structural transformation and electrochemical study of layered MnO2 in rechargeable aqueous zinc-ion battery. Electrochim. Acta 276, 1–11 (2018). https://doi.org/10.1016/j.electacta.2018.04.139
[33] Y. Li, Y. Xu, W. Yang, W. Shen, H. Xue, H. Pang, MOF-derived metal oxide composites for advanced electrochemical energy storage. Small 101, 1704435 (2018). https://doi.org/10.1016/j.electacta.2018.04.139
[34] H. Yao, Y. You, Y. Yin, L. Wan, Y. Guo, Rechargeable dual-metal-ion batteries for advanced energy storage. Phys. Chem. Chem. Phys. 18, 9326–9333 (2016). https://doi.org/10.1039/c6cp00586a
[35] X. Li, S. Zheng, L. Jin, Y. Li, P. Geng, H. Xue, H. Pang, Metal-organic framework-derived carbons for battery applications. Adv. Energy Mater. 8, 1800716 (2018). https://doi.org/10.1002/aenm.201800716
[36] Y. Li, Y. Lu, C. Zhao, Y. Hu, M. Titirici, H. Li, X. Huang, L. Chen, Recent advances of electrode materials for low-cost sodium-ion batteries towards practical application for grid energy storage. Energy Storage Mater. 7, 130–151 (2017). http://doi.org/10.1016/j.ensm.2017.01.002
[37] Q. Wang, P. Ping, X. Zhao, G. Chu, J. Sun, C. Chen, Thermal runaway caused fire and explosion of lithium ion battery. J. Power Sources 208, 210–224 (2012). http://doi.org/10.1016/j.jpowsour.2012.02.038
[38] K. T. Lee, S. Jeong, and J. Cho, Roles of surface chemistry on safety and electrochemistry in lithium ion batteries. ACC Chem. Res. 46(5), 1161–1170 (2013). http://doi.org/10.1021/ar200224h
[39] J. Wang, H. Wang, D. Cao, X. Lu, X. Han, C. Niu, Epitaxial growth of urchin-like CoSe2 nanorods from electrospun co-embedded porous carbon nanofibers and their superior lithium storage properties. Part. Part. Syst. Charact. 34(10), 1700185 (2017). http://doi.org/10.1002/ppsc.201700185
[40] H. Hu, J. Zhang, B. Guan, X.W.D. Lou, Unusual formation of CoSe@carbon nanoboxes, which have an inhomogeneous shell, for efficient lithium storage. Angew. Chem. Int. Ed. 55(33), 9514–9518 (2016). http://doi.org/10.1002/anie.201603852
[41] J. Li, D. Yan, T. Lu, Y. Yao, L. Pan, An advanced CoSe embedded within porous carbon polyhedra hybrid for high performance lithium-ion and sodium-ion batteries. Chem. Eng. J. 325, 14–24 (2017). http://dx.doi.org/10.1016/j.cej.2017.05.046
[42] J. Yang, H. Gao, S. Men, Z. Shi, Z. Lin, X. Kang, S. Chen, CoSe2 nanoparticles encapsulated by n-doped carbon framework intertwined with carbon nanotubes: high-performance dual-role anode materials for both Li- and Na-ion batteries. Adv. Sci. 1800763, 1800763 (2018). http://doi.wiley.com/10.1002/advs.201800763
[43] J. Gao, Y. Li, L. Shi, J. Li, G. Zhang, Rational design of hierarchical nanotubes through encapsulating CoSe2 nanoparticles into MoSe2/C composite shells with enhanced lithium and sodium storage performance. ACS Appl. Mater. Interfaces 10(24), 20635–20642 (2018). http://pubs.acs.org/doi/10.1021/acsami.8b06442
[44] Z. Li, H. Xue, J. Wang, Y. Tang, C.-S. Lee, S. Yang, Reduced graphene oxide/marcasite-type cobalt selenide nanocrystals as an anode for lithium-ion batteries with excellent cyclic performance. ChemElectroChem 2(11), 1682–1686 (2015). http://doi.wiley.com/10.1002/celc.201500179
[45] D. Chen, G. Chen, J. Pei, Y. Hu, Z. Qin, J. Wang, F. Wu, Formation of porous Cu-doped CoSe2 connected by nanoparticles for efficient lithium storage. ChemElectroChem 4(9), 2158–2163 (2017). http://doi.wiley.com/10.1002/celc.201700384
[46] Y. Yang, J. Liu, H.-Q. Dai, Y. Cui, J. Liu, X. Liu, and Z.-W. Fu, Pulsed laser deposited NiO–NiSe nanocomposite as a new anode material for lithium storage. J. Alloys Compd. 661, 190–195 (2016). https://doi.org/10.1016/j.jallcom.2015.11.119
[47] L. Mi, H. Sun, Q. Ding, W. Chen, C. Liu, H. Hou, Z. Zheng, C. Shen, 3D hierarchically patterned tubular NiSe with nano-/microstructures for Li ion battery design. Dalt. Trans. 41(40), 12595 (2012). http://doi.org/10.1039/C2DT31787G
[48] Z. Zhang, X. Shi, X. Yang, Synthesis of core-shell NiSe/C nanospheres as anodes for lithium and sodium storage. Electrochim. Acta 208, 238–243 (2016). http://doi.org/10.1016/j.electacta.2016.04.183
[49] A.D. Roberts, X. Li, H. Zhang, Porous carbon spheres and monoliths: morphology control, pore size tuning and their applications as Li-ion battery anode materials. Chem. Soc. Rev. 43(13), 4341–4356 (2014). http://doi.org/10.1039/C4CS00071D
[50] J. Liu, Y. Yang, X. Liu, M. Xue, J. Liu, Y. Cui, Facile synthesis and electrochemical properties of Fe2SeS for lithium ion batteries. J. Power Sources 306, 317–321 (2016). https://doi.org/10.1016/j.jpowsour.2015.11.113
[51] D. Wei, J. Liang, Y. Zhu, L. Hu, K. Zhang, J. Zhang, Z. Yuan, Y. Qian, Layer structured α-FeSe: A potential anode material for lithium storage. Electrochem. Commun. 38, 124–127 (2014). http://doi.org/10.1016/j.elecom.2013.11.021
[52] K. Mizushima, P. Jones, P. Wiseman, J. Goodenough, LixCoO2 (0  x  1): a new cathode material for batteries of high energy density. Solid State Ion. 3–4(C), 171–174 (1981).  https://doi.org/10.1016/0167-2738(81)90077-1
[53] B.L. Ellis, W.R.M. Makahnouk, Y. Makimura, K. Toghill, L.F. Nazar, A multifunctional iron-based phosphate cathode for rechargeable batteries. Nat. Mater. 6(10), 749–753 (2007). https://doi.org/10.1038/nmat2007
[54] Y. Zhang, A. Pan, L. Ding, Z. Zhou, Y. Wang, S. Niu, S. Liang, G. Cao, Nitrogen-doped yolk–shell-structured CoSe/C dodecahedra for high-performance sodium ion batteries. ACS Appl. Mater. Interfaces 9(4), 3624–3633 (2017). https://doi.org/10.1021/acsami.6b13153
[55] G.D. Park, Y.C. Kang, One-pot synthesis of CoSex–rGO composite powders by spray pyrolysis and their application as anode material for sodium-ion batteries. Chem. A Eur. J. 22(4), 4140–4146 (2016). https://doi.org/10.1002/chem.201504398
[56] X. Yang, J. Zhang, Z. Wang, H. Wang, C. Zhi, D.Y.W. Yu, A.L. Rogach, One-pot synthesis of CoSex–rGO composite powders by spray pyrolysis and their application as anode material for sodium-ion batteries. Small 14(7), 1702669 (2018). https://doi.org/10.1002/smll.201702669
[57] J.-S. Park, Y. Chan Kang, Multicomponent (Mo, Ni) metal sulfide and selenide microspheres with empty nanovoids as anode materials for Na-ion batteries. J. Mater. Chem. A 5(18), 8616–8623 (2017). https://doi.org/10.1039/C7TA01088E
[58] D. Li, J. Zhou, X. Chen, H. Song, Achieving ultrafast and stable Na-ion storage in FeSe2 nanorods/graphene anodes by controlling the surface oxide. ACS Appl. Mater. Interfaces 10(26), 22841–22850 (2018). https://doi.org/10.1021/acsami.8b06318
[59] X. Wei, C. Tang, Q. An, M. Yan, X. Wang, P. Hu, X. Cai, L. Mai, FeSe2 clusters with excellent cyclability and rate capability for sodium-ion batteries. Nano Res. 10(9), 3202–3211 (2017). https://doi.org/10.1007/s12274-017-1537-z
[60] G.D. Park, J.S. Cho, J.-K. Lee, Y.C. Kang, Na-ion storage performances of FeSex and Fe2O3 hollow nanoparticles-decorated reduced graphene oxide balls prepared by nanoscale Kirkendall diffusion process. Sci. Rep. 6(1), 22432 (2016). https://doi.org/10.1038/srep22432
[61] X. Xu, J. Liu, J. Liu, L. Ouyang, R. Hu, H. Wang, L. Yang, M. Zhu, A general metal-organic framework (MOF)-derived selenidation strategy for in situ carbon-encapsulated metal selenides as high-rate anodes for Na-ion batteries. Adv. Funct. Mater. 28(16), 1 (2018). https://doi.org/10.1002/adfm.201707573
[62] Z. Ali, M. Asif, X. Huang, T. Tang, Y. Hou, Hierarchically porous Fe2CoSe4 binary-metal selenide for extraordinary rate performance and durable anode of sodium-ion batteries. Adv. Mater. 30(36), 1–9 (2018). https://doi.org/10.1002/adma.201802745
[63] Y. Duan, Q. Tang, B. He, Z. Zhao, L. Zhu, L. Yu, Bifacial dye-sensitized solar cells with transparent cobalt selenide alloy counter electrodes. J. Power Sources 284, 349–354 (2015). https://doi.org/10.1016/j.jpowsour.2015.03.045
[64] J. Liu, Q. Tang, B. He, L. Yu, Cost-effective bifacial dye-sensitized solar cells with transparent iron selenide counter electrodes. An avenue of enhancing rear-side electricity generation capability. J. Power Sources 275, 288–293 (2015). https://doi.org/10.1016/j.jpowsour.2014.10.152
[65] Y. Li, H. Peng, L. Yang, H. Dong, P. Xiao, Investigating the effect of sulfur and selenium on the electrochemical properties of nickel–cobalt oxides: enhanced charge capacity and composition–property relationships. J. Mater. Sci. 51(15), 7108–7118 (2016). https://doi.org/10.1007/s10853-016-9968-6
[66] M.-Z. Xue, Z.-W. Fu, Lithium electrochemistry of NiSe2: a new kind of storage energy material. Electrochem. Commun. 8(12), 1855–1862 (2006). https://doi.org/10.1016/j.elecom.2006.08.025
[67] J. Yang, H. Gao, D. Ma, J. Zou, Z. Lin, X. Kang, S. Chen, High-performance Li–Se battery cathode based on CoSe2-porous carbon composites. Electrochim. Acta 264, 341–349 (2018). https://doi.org/10.1016/j.electacta.2018.01.105
[68] P. Geng, S. Zheng, H. Tang, R. Zhu, L. Zhang, S. Cao, H. Xue, H. Pang, Transition metal sulfides based on graphene for electrochemical energy storage. Adv. Energy Mater. 8(15), 1703259 (2018). https://doi.org/10.1002/aenm.201703259
[69] J.S. Cho, J.-S. Park, K.M. Jeon, Y. Chan Kang, 1-D nanostructure comprising porous Fe2O3/Se composite nanorods with numerous nanovoids, and their electrochemical properties for use in lithium-ion batteries. J. Mater. Chem. A 5(21), 10632–10639 (2017). https://doi.org/10.1039/C7TA02616A
[70] E.S. Davydova, I.N. Atamanyuk, A.S. Ilyukhin, E.I. Shkolnikov, A.Z. Zhuk, Nitrogen-doped carbonaceous catalysts for gas-diffusion cathodes for alkaline aluminum-air batteries. J. Power Sources 306, 329–336 (2016). https://doi.org/10.1016/j.elecom.2013.11.021
[71] G.D. Park, J.S. Cho, J.K. Lee, Y.C. Kang, Na-ion storage performances of FeSex and Fe2O3 hollow nanoparticles-decorated reduced graphene oxide balls prepared by nanoscale kirkendall diffusion process. Sci. Rep. 6, 1–10 (2016). https://doi.org/10.1038/srep22432
[72] D.P. Dubal, O. Ayyad, V. Ruiz, P. Gómez-Romero, Hybrid energy storage: the merging of battery and supercapacitor chemistries. Chem. Soc. Rev. 44(7), 1777–1790 (2015). https://doi.org/10.1039/C4CS00266K
[73] Y. Zhu, Z. Huang, Z. Hu, L. Xi, X. Ji, Y. Liu, 3D interconnected ultrathin cobalt selenide nanosheets as cathode materials for hybrid supercapacitors. Electrochim. Acta 269, 30–37 (2018). https://doi.org/10.1016/j.electacta.2018.02.146
[74] G. Ma, F. Hua, K. Sun, E. Fenga, H. Peng, Z. Zhang, Z. Lei, Nanostructure selenium compounds as pseudocapacitive electrodes for high-performance asymmetric supercapacitor. R. Soc. Open Sci. 5(1), 171186 (2018). https://doi.org/10.1098/rsos.171186
[75] B. Kirubasankar, V. Murugadoss, S. Angaiah, Hydrothermal assisted in situ growth of CoSe onto graphene nanosheets as a nanohybrid positive electrode for asymmetric supercapacitors. RSC Adv. 7(10), 5853–5862 (2017). https://doi.org/10.1039/C6RA25078E
[76] Y. Zhang, A. Pan, Y. Wang, X. Cao, Z. Zhou, T. Zhu, S. Liang, G. Cao, Self-templated synthesis of N-doped CoSe2/C double-shelled dodecahedra for high-performance supercapacitors. Energy Storage Mater. 8, 28–34 (2017). https://doi.org/10.1016/j.ensm.2017.03.005
[77] C. Gong, M. Huang, P. Zhou, Z. Sun, L. Fan, J. Lin, J. Wu, Mesoporous Co0.85Se nanosheets supported on Ni foam as a positive electrode material for asymmetric supercapacitor. Appl. Surf. Sci. 362, 469–476 (2016). https://doi.org/10.1016/j.apsusc.2015.11.194
[78] S. Tang, S. Vongehr, Y. Wang, J. Cui, X. Wang, X. Meng, Versatile synthesis of high surface area multi-metallic nanosponges allowing control over nanostructure and alloying for catalysis and sers detection. J. Mater. Chem. A 2(10), 3648–3660 (2014). https://doi.org/10.1039/C3TA14541G
[79] H. Peng, J. Zhou, K. Sun, G. Ma, Z. Zhang, E. Feng, Z. Lei, High-performance asymmetric supercapacitor designed with a novel NiSe@MoSe2 nanosheet array and nitrogen-doped carbon nanosheet. ACS Sustain. Chem. Eng. 5(7), 5951–5963 (2017). https://doi.org/10.1021/acssuschemeng.7b00729
[80] Y. Tian, Y. Ruan, J. Zhang, Z. Yang, J. Jiang, C. Wang, Controllable growth of NiSe nanorod arrays via one-pot hydrothermal method for high areal-capacitance supercapacitors. Electrochim. Acta 250, 327–334 (2017). https://doi.org/10.1016/j.electacta.2017.08.084
[81] B. Chen, Y. Tian, Z. Yang, Y. Ruan, J. Jiang, C. Wang, Construction of (Ni, Cu) Se2//reduced graphene oxide for high energy density asymmetric supercapacitor. ChemElectroChem 4(11), 3004–3010 (2017). https://doi.org/10.1002/celc.201700742
[82] Q. Bao, J. Wu, L. Fan, J. Ge, J. Dong, J. Jia, J. Zeng, J. Lin, Electrodeposited NiSe2 on carbon fiber cloth as a flexible electrode for high-performance supercapacitors. J. Energy Chem. 26(6), 1252–1259 (2017). https://doi.org/10.1016/j.jechem.2017.09.023
[83] Z. Tang, C. Jia, Z. Wan, Q. Zhou, X. Ye, Y. Zhu, Facile preparation of CoNi2S4 @NiSe nano arrays on compressed nickel foam for high performance flexible supercapacitors. RSC Adv. 6(113), 112307–112316 (2016). https://doi.org/10.1039/C6RA20871A
[84] K. Guo, F. Yang, S. Cui, W. Chen, L. Mi, Controlled synthesis of 3D hierarchical NiSe microspheres for high-performance supercapacitor design. RSC Adv. 6(52), 46523–46530 (2016). https://doi.org/10.1039/C6RA06909F
[85] P. Yang, Z. Wu, Y. Jiang, Z. Pan, W. Tian, L. Jiang, L. Hu, Fractal (NixCo1−x)9Se8 nanodendrite arrays with highly exposed (011) surface for wearable, all-solid-state supercapacitor. Adv. Energy Mater. 8(26), 1801392 (2018). https://doi.org/10.1002/aenm.201801392
[86] H. Chen, M. Fan, C. Li, G. Tian, C. Lv, D. Chen, K. Shu, J. Jiang, One-pot synthesis of hollow NiSe–CoSe nanoparticles with improved performance for hybrid supercapacitors. J. Power Sources 329, 314–322 (2016). https://doi.org/10.1016/j.jpowsour.2016.08.097
[87] C. Zhang, M. Hou, X. Cai, J. Lin, X. Liu et al., One-step coaxial electrodeposition of Co0.85Se on CoNi2S4 nanotube arrays for flexible solid-state asymmetric supercapacitors. J. Mater. Chem. A 6(32), 15630–15639 (2018). https://doi.org/10.1039/C8TA05131C
[88] Y. Liang, H. Wang, J. Zhou, Y. Li, J. Wang, T. Regier, H. Dai, Covalent hybrid of spinel manganese–cobalt oxide and graphene as advanced oxygen reduction electrocatalysts. J. Am. Chem. Soc. 134(7), 3517–3523 (2012). https://doi.org/10.1021/ja210924t
[89] M. Lefèvre, E. Proietti, F. Jaouen, J.-P. Dodelet, Iron-based catalysts with improved oxygen reduction activity in polymer electrolyte fuel cells. Science 324(5923), 71–74 (2009)
[90] R. Cao, R. Thapa, H. Kim, X. Xu, M. Gyu Kim et al., Promotion of oxygen reduction by a bio-inspired tethered iron phthalocyanine carbon nanotube-based catalyst. Nat. Commun. 4(1), 2076 (2013). https://doi.org/10.1038/ncomms3076
[91] C. Xu, Z. Lin, D. Zhao, Y. Sun, Y. Zhong et al., Facile in situ fabrication of Co nanoparticles embedded in 3D N-enriched mesoporous carbon foam electrocatalyst with enhanced activity and stability toward oxygen reduction reaction. J. Mater. Sci. 54(7), 5412–5423 (2019). https://doi.org/10.1007/s10853-018-03255-0
[92] S. Wen, K. Qin, P. Liu, N. Zhao, L. Ma, C. Shi, E. Liu, Ultrahigh volumetric capacitance and cycle stability via structure design and synergistic action between CoMoO4 nanosheets and 3D porous Ni–Co film. Appl. Surf. Sci. 465, 389–396 (2019). https://doi.org/10.1016/j.apsusc.2018.09.207
[93] L. Ding, Q. Xin, X. Zhou, J. Qiao, H. Li, H. Wang, Electrochemical behavior of nanostructured nickel phthalocyanine (NiPc/C) for oxygen reduction reaction in alkaline media. J. Appl. Electrochem. 43(1), 43–51 (2013). https://doi.org/10.1007/s10800-012-0503-4
[94] D. Shin, B. Jeong, B.S. Mun, H. Jeon, H.-J. Shin, J. Baik, J. Lee, On the origin of electrocatalytic oxygen reduction reaction on electrospun nitrogen–carbon species. J. Phys. Chem. C 117(22), 11619–11624 (2013). https://doi.org/10.1021/jp401186a
[95] S. Liu, Z. Zhang, J. Bao, Y. Lan, W. Tu, M. Han, Z. Dai, Controllable synthesis of tetragonal and cubic phase Cu2Se nanowires assembled by small nanocubes and their electrocatalytic performance for oxygen reduction reaction. J. Phys. Chem. C 117(29), 15164–15173 (2013). https://doi.org/10.1021/jp4044122
[96] L. Yang, S. Jiang, Y. Zhao, L. Zhu, S. Chen, Boron-doped carbon nanotubes as metal-free electrocatalysts for the oxygen reduction reaction. Angew. Chem. Int. Ed. 50(31), 7132–7135 (2011). https://doi.org/10.1002/anie.201101287
[97] K. Gong, F. Du, Z. Xia, M. Durstock, L. Dai, Nitrogen-doped carbon nanotube arrays with high electrocatalytic activity for oxygen reduction. Science 323(5915), 760–764 (2009). https://doi.org/10.1126/science.1168049
[98] T. Hibino, K. Kobayashi, P. Heo, Oxygen reduction reaction over nitrogen-doped graphene oxide cathodes in acid and alkaline fuel cells at intermediate temperatures. Electrochim. Acta 112, 82–89 (2013). https://doi.org/10.1016/j.electacta.2013.08.101
[99] J. Wu, Z. Yang, X. Li, Q. Sun, C. Jin, P. Strasser, R. Yang, Phosphorus-doped porous carbons as efficient electrocatalysts for oxygen reduction. J. Mater. Chem. A 1(34), 9889–9896 (2013). https://doi.org/10.1039/C3TA11849E
[100] J. Zhu, G. He, L. Liang, Q. Wan, P.K. Shen, Direct anchoring of platinum nanoparticles on nitrogen and phosphorus-dual-doped carbon nanotube arrays for oxygen reduction reaction. Electrochim. Acta 158, 374–382 (2015). https://doi.org/10.1016/j.electacta.2015.01.173
[101] J. Liang, Y. Jiao, M. Jaroniec, S.Z. Qiao, Sulfur and nitrogen dual-doped mesoporous graphene electrocatalyst for oxygen reduction with synergistically enhanced performance. Angew. Chem. Int. Ed. 51(46), 11496–11500 (2012). https://doi.org/10.1002/anie.201206720
[102] D. Susac, L. Zhu, M. Teo, A. Sode, K.C. Wong et al., Characterization of FeS2-based thin films as model catalysts for the oxygen reduction reaction. J. Phys. Chem. C 111(50), 18715–18723 (2007). https://doi.org/10.1021/jp073395i
[103] Z. Jin, H. Nie, Z. Yang, J. Zhang, Z. Liu, X. Xu, S. Huang, Metal-free selenium doped carbon nanotube/graphene networks as a synergistically improved cathode catalyst for oxygen reduction reaction. Nanoscale 4(20), 6455–6460 (2012). https://doi.org/10.1039/C2NR31858J
[104] L.F. Zhang, C.Y. Zhang, Multifunctional Co0.85Se/graphene hybrid nanosheets: Controlled synthesis and enhanced performances for the oxygen reduction reaction and decomposition of hydrazine hydrate. Nanoscale 6(3), 1782–1789 (2014). https://doi.org/10.1039/C3NR05509D
[105] Y.S. Chao, D.S. Tsai, A.P. Wu, L.W. Tseng, Y.S. Huang, Cobalt selenide electrocatalyst supported by nitrogen-doped carbon and its stable activity toward oxygen reduction reaction. Int. J. Hydrog. Energy 38(14), 5655–5664 (2013). https://doi.org/10.1016/j.ijhydene.2013.03.006
[106] D. Zhao, S. Zhang, G. Yin, C. Du, Z. Wang, J. Wei, Effect of Se in Co-based selenides towards oxygen reduction electrocatalytic activity. J. Power Sources 206, 103–107 (2012). https://doi.org/10.1016/j.jpowsour.2012.01.018
[107] P. Nekooi, M. Akbari, M.K. Amini, CoSe nanoparticles prepared by the microwave-assisted polyol method as an alcohol and formic acid tolerant oxygen reduction catalyst. Renew. Energy 35(12), 6392–6398 (2010). https://doi.org/10.1016/j.ijhydene.2010.03.134
[108] L. Zhu, D. Susac, A. Lam, M. Teo, P.C. Wong, D. Bizzotto, S.A. Campbell, R.R. Parsons, K.A.R. Mitchell, Structure of sputtered Co–Se thin films prepared for an application in catalysis. J. Solid State Chem. 179(12), 3942–3948 (2006). https://doi.org/10.1016/j.jssc.2006.08.028
[109] Q. Zheng, X. Cheng, H. Li, Microwave synthesis of high activity FeSe2/C catalyst toward oxygen reduction reaction. Catalysts 5(3), 1079–1091 (2015). https://doi.org/10.3390/catal5031079
[110] A. Ezeta, E.M. Arce, O. Solorza, R.G. González, H. Dorantes, Effect of the leaching of Ru–Se–Fe and Ru–Mo–Fe obtained by mechanical alloying on electrocatalytical behavior for the oxygen reduction reaction. J. Alloys Compd. 483(1–2), 429–431 (2009). https://doi.org/10.1016/j.jallcom.2008.08.115
[111] S.P. Chiao, D.S. Tsai, D.P. Wilkinson, Y.M. Chen, Y.S. Huang, Carbon supported Ru1−xFexSey electrocatalysts of pyrite structure for oxygen reduction reaction. Int. J. Hydrog. Energy 35(13), 6508–6517 (2010). https://doi.org/10.1016/j.ijhydene.2010.04.032
[112] C. Dai, X. Tian, Y. Nie, C. Tian, C. Yang, Z. Zhou, Y. Li, X. Gao, Successful synthesis of 3D CoSe2 hollow microspheres with high surface roughness and its excellent performance in catalytic hydrogen evolution reaction. Chem. Eng. J. 321, 105–112 (2017). https://doi.org/10.1016/j.cej.2017.03.068
[113] X. Chen, Y. Qiu, G. Liu, W. Zheng, W. Feng et al., Tuning electrochemical catalytic activity of defective 2D terrace MoSe2 heterogeneous catalyst: via cobalt doping. J. Mater. Chem. A 5(22), 11357–11363 (2017). https://doi.org/10.1039/C7TA02327H
[114] W. Zhou, J. Lu, K. Zhou, L. Yang, Y. Ke, Z. Tang, S. Chen, CoSe2 nanoparticles embedded defective carbon nanotubes derived from MOFs as efficient electrocatalyst for hydrogen evolution reaction. Nano Energy 28, 143–150 (2016). https://doi.org/10.1016/j.nanoen.2016.08.040
[115] X. Chang, J. Jian, G. Cai, R. Wu, J. Li, Three-dimensional FeSe2 microflowers assembled by nanosheets: synthesis, optical properties, and catalytic activity for the hydrogen evolution reaction. Electron. Mater. Lett. 12(2), 237–242 (2016). https://doi.org/10.1007/s13391-016-5377-x
[116] M. Xiao, Z. Zhang, Y. Tian, Y. Miao, J. Wang, Co–Fe–Se ultrathin nanosheet-fabricated microspheres for efficient electrocatalysis of hydrogen evolution. J. Appl. Electrochem. 47(3), 361–367 (2017). https://doi.org/10.1007/s10800-016-1014-5
[117] J. Du, Z. Zou, C. Liu, C. Xu, Hierarchical Fe-doped Ni3Se4 ultrathin nanosheets as an efficient electrocatalyst for oxygen evolution reaction. Nanoscale 10, 5163–5170 (2018). https://doi.org/10.1039/c8nr00426a
[118] J. Yu, G. Cheng, W. Luo, 3D mesoporous rose-like nickel-iron selenide microspheres as advanced electrocatalysts for the oxygen evolution reaction. Nano Res. 11(4), 2149–2158 (2018). https://doi.org/10.1007/s12274-017-1832-8
[119] R. Bose, V.R. Jothi, D.B. Velusamy, P. Arunkumar, S.C. Yi, A highly effective, stable oxygen evolution catalyst derived from transition metal selenides and phosphides. Part. Part. Syst. Charact. 35(8), 1800135 (2018). https://doi.org/10.1002/ppsc.201800135
[120] Y. Hou, M.R. Lohe, J. Zhang, S. Liu, X. Zhuang, X. Feng, Vertically oriented cobalt selenide/NiFe layered-double-hydroxide nanosheets supported on exfoliated graphene foil: an efficient 3D electrode for overall water splitting. Energy Environ. Sci. 9(2), 478–483 (2016). https://doi.org/10.1039/C5EE03440J
[121] X. Zhang, M. Zhen, J. Bai, S. Jin, L. Liu, Efficient NiSe–Ni3Se2/graphene electrocatalyst in dye-sensitized solar cells: the role of hollow hybrid nanostructure. ACS Appl. Mater. Interfaces 8(27), 17187–17193 (2016). https://doi.org/10.1021/acsami.6b02350
[122] K. Xu, H. Ding, K. Jia, X. Lu, P. Chen et al., Solution–liquid–solid synthesis of hexagonal nickel selenide nanowire arrays with a nonmetal catalyst. Angew. Chem. Int. Ed. 55(5), 1710–1713 (2016). https://doi.org/10.1002/anie.201508704
[123] Y.J. Kim, K. Yuan, B.R. Ellis, U. Becker, Redox reactions of selenium as catalyzed by magnetite: lessons learned from using electrochemistry and spectroscopic methods. Geochim. Cosmochim. Acta 199, 304–323 (2017). https://doi.org/10.1016/j.gca.2016.10.039
[124] F. Qiao, Z. Wang, K. Xu, S. Ai, Double enzymatic cascade reactions within FeSe–Pt@SiO2 nanospheres: synthesis and application toward colorimetric biosensing of H2O2 and glucose. Analyst 140(19), 6684–6691 (2015). https://doi.org/10.1039/C5AN01268F
[125] L. Shao, X. Qian, H. Li, C. Xu, L. Hou, Shape-controllable syntheses of ternary Ni–Co–Se alloy hollow microspheres as highly efficient catalytic materials for dye-sensitized solar cells. Chem. Eng. J. 315, 562–572 (2017). https://doi.org/10.1016/j.cej.2017.01.055
[126] E. Reisner, J.C. Fontecilla-Camps, F.A. Armstrong, Catalytic electrochemistry of a [NiFeSe]-hydrogenase on TiO2 and demonstration of its suitability for visible-light driven H2 production. Chem. Commun. 550–552 (2009). https://doi.org/10.1039/B817371K
[127] C. Wombwell, E. Reisner, Synthetic active site model of the [NiFeSe] hydrogenase. Chem. A Eur. J. 21(22), 8096–8104 (2015). https://doi.org/10.1002/chem.201500311
[128] M.G. Walter, E.L. Warren, J.R. McKone, S.W. Boettcher, Q. Mi, E.A. Santori, N.S. Lewis, Solar water splitting cells. Chem. Rev. 110(11), 6446–6473 (2010). https://doi.org/10.1021/cr1002326
[129] F.E. Osterloh, Inorganic nanostructures for photoelectrochemical and photocatalytic water splitting. Chem. Soc. Rev. 42(6), 2294–2320 (2013). https://doi.org/10.1039/C2CS35266D
[130] L. An, Y. Li, M. Luo, J. Yin, Y.Q. Zhao et al., Atomic-level coupled interfaces and lattice distortion on CuS/NiS2 nanocrystals boost oxygen catalysis for flexible Zn-air batteries. Adv. Funct. Mater. 27(42), 1–9 (2017). https://doi.org/10.1002/adfm.201703779
[131] X. Chen, B. Liu, C. Zhong, Z. Liu, J. Liu et al., Ultrathin Co3O4 layers with large contact area on carbon fibers as high-performance electrode for flexible zinc–air battery integrated with flexible display. Adv. Energy Mater. 7(18), 1–11 (2017). https://doi.org/10.1002/aenm.201700779
[132] Y. Liu, H. Cheng, M. Lyu, S. Fan, Q. Liu et al., Low overpotential in vacancies-rich ultrathin CoSe2 nanosheets for water oxidation. J. Am. Chem. Soc. 136, 15670–15675 (2014). https://doi.org/10.1021/ja5085157
[133] A. Sivanantham, S. Shanmugam, Nickel selenide supported on nickel foam as an efficient and durable non-precious electrocatalyst for the alkaline water electrolysis. Appl. Catal. B Environ. 203, 485–493 (2017). https://doi.org/10.1016/j.apcatb.2016.10.050
[134] Z. Zhuang, Q. Peng, J. Zhuang, X. Wang, Y. Li, Controlled hydrothermal synthesis and structural characterization of a nickel selenide series. Chem. A Eur. J. 12(1), 211–217 (2006). https://doi.org/10.1002/chem.200500724
[135] B. Anugop, S. Prasanth, D. Rithesh Raj, T.V. Vineeshkumar, S. Pranitha, V.P. Mahadevan Pillai, C. Sudarsanakumar, Role of Mn2+ concentration in the linear and nonlinear optical properties of Ni1−xMnxSe nanoparticles. Opt. Mater. 62, 297–305 (2016). https://doi.org/10.1016/j.optmat.2016.10.017
[136] T. Wang, X. Li, Y. Jiang, Y. Zhou, L. Jia, C. Wang, Reduced graphene oxide-polyimide/carbon nanotube film decorated with NiSe nanoparticles for electrocatalytic hydrogen evolution reactions. Electrochim. Acta 243, 291–298 (2017). https://doi.org/10.1016/j.electacta.2017.05.084
[137] X. Zheng, X. Han, H. Liu, J. Chen, D. Fu, J. Wang, C. Zhong, Y. Deng, W. Hu, Controllable synthesis of NixSe (0.5 x 1) nanocrystals for efficient rechargeable zinc–air batteries and water splitting. ACS Appl. Mater. Interfaces 10(16), 13675–13684 (2018). https://doi.org/10.1021/acsami.8b01651
[138] J. Zheng, Q. Gong, X. Cheng, S. Gong, W. Yang, L. Huang, Microwave synthesis of carbon-supported cobalt nickel selenide ternary catalyst toward the oxygen reduction reaction. ChemElectroChem 5(14), 2019–2028 (2018). https://doi.org/10.1002/celc.201800190

References

[1] G.D. Park, J.S. Cho, Y.C. Kang, Sodium-ion storage properties of nickel sulfide hollow nanospheres/reduced graphene oxide composite powders prepared by a spray drying process and the nanoscale Kirkendall effect. Nanoscale 7(40), 16781–16788 (2015). https://doi.org/10.1039/C5NR04252F
[2] C. Zhang, Y. Huang, S. Tang, M. Deng, Y. Du, High-energy all-solid-state symmetric supercapacitor based on Ni3S2 mesoporous nanosheet-decorated three-dimensional reduced graphene oxide. ACS Energy Lett. 2(4), 759–768 (2017). https:// doi.org/10.1021/acsenergylett.7b00078
[3] P.R. Jothi, R.R. Salunkhe, M. Pramanik, S. Kannan, Y. Yamauchi, Surfactant-assisted synthesis of nanoporous nickel sulfide flakes and their hybridization with reduced graphene oxides for supercapacitor applications. RSC Adv. 6(25), 21246–21253 (2016). https://doi.org/10.1039/C5RA26946F
[4] T.T. Shan, S. Xin, Y. You, H.P. Cong, S.H. Yu, A. Manthiram, Combining nitrogen-doped graphene sheets and MoS2: A unique film–foam–film structure for enhanced lithium storage. Angew. Chem. Int. Ed. 55(41), 12783–12788 (2016). https://doi.org/10.1002/anie.201606870
[5] D. Xie, W. Yuan, Z. Dong, Q. Su, J. Zhang, G. Du, Facile synthesis of porous NiO hollow microspheres and its electrochemical lithium-storage performance. Electrochim. Acta 92, 8787–8792 (2013). http://doi.org/10.1016/j.electacta.2013.01.008
[6] L. Zhang, E. Drummond, M.A. Brodney, J. Cianfrogna, S.E. Drozda, S. Grimwood, M.A. Vanase-Frawley, A. Villalobos, Design, synthesis and evaluation of [3H]PF-7191, a highly specific nociceptin opioid peptide (NOP) receptor radiotracer for in vivo receptor occupancy (RO) studies. Bioorganic Med. Chem. Lett. 24(22), 5219–5223 (2014). http://doi.org/10.1016/j.bmcl.2014.09.069
[7] R. Kumar, M. Krishnaih, S. Yeob, A. Kumar, S. Hun, Binder-free, scalable hierarchical MoS2 as electrode materials in symmetric supercapacitors for energy harvesting applications. Mater. Lett. 236, 167–170 (2019). https://doi.org/10.1016/j.matlet.2018.10.009 
[8] J. Wu, L. Du, Y. Shao, X. Wu, Silicon quantum dots-assistant synthesis of mesoporous MoS2 3D frameworks ( SiQDs-MoS2 ) with 1T and 2H phases for hydrogen evolution reaction. Mater. Lett. 236, 124–127 (2019). https://doi.org/10.1016/j.matlet.2018.10.095
[9] N. Q. Hai, H. Kim, I. S. Yoo, J. Hur, Facile and scalable preparation of a MoS2 /carbon nanotube nanocomposite anode for high-performance lithium-ion batteries: effects of carbon nanotube content. J. Nanosci. Nanotechnol. 19(3), 1494–1499 (2019). https://doi.org/10.1166/jnn.2019.16154
[10] W. Li, J. Huang, L. Feng, L. Cao, Y. Liu, L. Pan, VS2 nanoarchitectures assembled by single-crystal nanosheets for enhanced sodium storage properties. Electrochim. Acta (2018). https://doi.org/10.1016/j.electacta.2018.08.049
[11] Z. Zhang, X. Huang, H. Wang, S. Hwa, T. Ma, Free-standing NiCo2S4@VS2 nanoneedle array composite electrode for high performance asymmetric supercapacitor application. J. Alloys Compd. 771, 274–280 (2019). https://doi.org/10.1016/j.jallcom.2018.08.325
[12] J.K. Das, A.K. Samantara, A.K. Nayak, D. Pradhan, J.N. Behera, VS2: an efficient catalyst for an electrochemical hydrogen evolution reaction in an acidic medium. Dalt. Trans. 47(39), 13792 (2018). https://doi.org/10.1039/C8DT02547A
[13] W. Hou, Y. Xiao, G. Han, The dye-sensitized solar cells based on the interconnected ternary cobalt diindium sul fi de nanosheet array counter electrode. Mater. Res. Bull. 107(July), 204–212 (2018). https://doi.org/10.1016/j.materresbull.2018.07.040
[14] Y. Pan, X. Cheng, Nanoflower-like N-doped C/CoS2 as high-performance anode materials for Na-ion batteries. Nanoscale 10, 20813–20820 (2018). https://doi.org/10.1039/c8nr06959j 
[15] S. Luo, C. Zheng, W. Sun, Y. Wang, J. Ke et al., Multi-functional CoS2-N-C porous carbon composite derived from metal-organic frameworks for high performance lithium-sulfur batteries. Electrochim. Acta 289, 94–103 (2018). https://doi.org/10.1016/j.electacta.2018.09.048
[16] M. Govindasamy, S. Shanthi, E. Elaiyappillai, S. Wang, P. M. Johnson et al., Fabrication of hierarchical NiCo2S4@CoS2 nanostructures on highly conductive flexible carbon cloth substrate as a hybrid electrode material for supercapacitors with enhanced electrochemical performance. Electrochim. Acta 293, 328-337 (2019). https://doi.org/10.1016/j.electacta.2018.10.051
[17] Q. Su, Y. Lu, S. Liu, X. Zhang, Y. Lin, R. Fu, Nanonetwork-structured yolk-shell FeS2@C as high-performance cathode materials for Li-ion batteries. Carbon 140, 433–440 (2018). https://doi.org/10.1016/j.carbon.2018.08.049
[18] S. Venkateshalu, P.G. Kumar, S.K. Jeong, A.N. Grace, Solvothermal synthesis and electrochemical properties of phase pure pyrite FeS2 for supercapacitor applications. Electrochim. Acta 290, 378-389 (2018). https://doi.org/10.1016/j.electacta.2018.09.027
[19] J. Jiang, L. Zhu, H. Chen, Y. Sun, W. Qian, H. Lin, S. Han, Highly active and stable electrocatalysts of FeS2–reduced graphene oxide for hydrogen evolution. J. Mater. Sci. 54(2), 1422–1433 (2019). https://doi.org/10.1007/s10853-018-2913-0
[20] H. Fang, T. Huang, J. Mao, S. Yao, M.M. Dinesh, Investigation on the catalytic performance of reduced-graphene-oxide-interpolated FeS2 and FeS for oxygen reduction reaction. ChemistrySelect 3, 10418–10427 (2018). http://doi.org/10.1002/slct.201800835
[21] G. Chen, X. Yao, Q. Cao, S. Ding, J. He, and S. Wang, Flexible free-standing SnS2/carbon nanofibers anode for high performance sodium-ion batteries. Mater. Lett. 234, 121-124(2019). https://doi.org/10.1016/j.matlet.2018.09.082
[22] M. Wang, Y. Huang, Y. Zhu, X. Wu, N. Zhang, H. Zhang, Binder-free flower-like SnS2 nanoplates decorated on the graphene as a flexible anode for high-performance lithium-ion batteries. J. Alloys Compd. 774, 601–609 (2019). https://doi.org/10.1016/j.jallcom.2018.09.378
[23] Y. Zhang, Y. Guo, Y. Wang, T. Peng, Y. Lu et al., Rational design of 3D honeycomb-like SnS2 quantum dots/rGO composites as high-performance anode materials for lithium/sodium-ion batteries. Nanoscale Res. Lett. 13, 389 (2018).  https://doi.org/10.1186/s11671-018-2805-x
[24] L. Yin, R. Cheng, Q. Song, J. Yang, X. Kong, J. Huang, Y. Lin, H. Ouyang, Construction of nanoflower SnS2 anchored on g-C3N4 nanosheets composite as highly efficient anode for lithium ion batteries. Electrochim. Acta 293, 408–418 (2019). https://doi.org/10.1016/j.electacta.2018.10.020
[25] J.S. Ross, S. Wu, H. Yu, N.J. Ghimire, A.M. Jones et al., Electrical control of neutral and charged excitons in a monolayer semiconductor. Nat. Commun. 4, 1473–1476 (2013). http://doi.org/10.1038/ncomms2498
[26] P. Zhao, H. Cui, J. Luan, Z. Guo, Y. Zhou, H. Xue, Porous FeS2 nanoparticles wrapped by reduced graphene oxide as high-performance Lithium-ion battery cathodes. Mater. Lett. 186, 62–65 ( 2017). http://doi.org/10.1016/j.matlet.2016.09.074
[27] L. Li, C. Gao, A. Kovalchuk, Z. Peng, G. Ruan et al., Sandwich structured graphene-wrapped FeS-graphene nanoribbons with improved cycling stability for lithium ion batteries. Nano Res. 9(10), 2904–2911 (2016). https://doi.org/10.1007/s12274-016-1175-x
[28] P. Simon, Y. Gogotsi, B. Dunn, Where do batteries end and supercapacitors begin?. Science 343(6176), 1210–1211 (2014). https://doi.org/10.1126/science.1249625
[29] T. Brousse, D. Belanger, J.W. Long, To be or not to be pseudocapacitive? J. Electrochem. Soc. 162(5), A5185–A5189 (2015). https://doi.org/10.1149/2.0201505jes
[30] L. Shen, Q. Che, H. Li, X. Zhang, Mesoporous NiCo2O4 nanowire arrays grown on carbon textiles as binder-free flexible electrodes for energy storage. Adv. Funct. Mater. 24(18), 2630–2637 (2014). https://doi.org/10.1002/adfm.201303138
[31] J. Lee, G. Ali, D. H. Kim, and K. Y. Chung, Metal-organic framework cathodes based on a vanadium hexacyanoferrate prussian blue analogue for high- performance aqueous rechargeable batteries. Adv. Energy Mater. 7, 1601491 (2016). https://doi.org/10.1002/aenm.201601491
[32] M.H. Alfaruqi, S. Islam, D.Y. Putro, V. Mathew, S. Kim et al., Structural transformation and electrochemical study of layered MnO2 in rechargeable aqueous zinc-ion battery. Electrochim. Acta 276, 1–11 (2018). https://doi.org/10.1016/j.electacta.2018.04.139
[33] Y. Li, Y. Xu, W. Yang, W. Shen, H. Xue, H. Pang, MOF-derived metal oxide composites for advanced electrochemical energy storage. Small 101, 1704435 (2018). https://doi.org/10.1016/j.electacta.2018.04.139
[34] H. Yao, Y. You, Y. Yin, L. Wan, Y. Guo, Rechargeable dual-metal-ion batteries for advanced energy storage. Phys. Chem. Chem. Phys. 18, 9326–9333 (2016). https://doi.org/10.1039/c6cp00586a
[35] X. Li, S. Zheng, L. Jin, Y. Li, P. Geng, H. Xue, H. Pang, Metal-organic framework-derived carbons for battery applications. Adv. Energy Mater. 8, 1800716 (2018). https://doi.org/10.1002/aenm.201800716
[36] Y. Li, Y. Lu, C. Zhao, Y. Hu, M. Titirici, H. Li, X. Huang, L. Chen, Recent advances of electrode materials for low-cost sodium-ion batteries towards practical application for grid energy storage. Energy Storage Mater. 7, 130–151 (2017). http://doi.org/10.1016/j.ensm.2017.01.002
[37] Q. Wang, P. Ping, X. Zhao, G. Chu, J. Sun, C. Chen, Thermal runaway caused fire and explosion of lithium ion battery. J. Power Sources 208, 210–224 (2012). http://doi.org/10.1016/j.jpowsour.2012.02.038
[38] K. T. Lee, S. Jeong, and J. Cho, Roles of surface chemistry on safety and electrochemistry in lithium ion batteries. ACC Chem. Res. 46(5), 1161–1170 (2013). http://doi.org/10.1021/ar200224h
[39] J. Wang, H. Wang, D. Cao, X. Lu, X. Han, C. Niu, Epitaxial growth of urchin-like CoSe2 nanorods from electrospun co-embedded porous carbon nanofibers and their superior lithium storage properties. Part. Part. Syst. Charact. 34(10), 1700185 (2017). http://doi.org/10.1002/ppsc.201700185
[40] H. Hu, J. Zhang, B. Guan, X.W.D. Lou, Unusual formation of CoSe@carbon nanoboxes, which have an inhomogeneous shell, for efficient lithium storage. Angew. Chem. Int. Ed. 55(33), 9514–9518 (2016). http://doi.org/10.1002/anie.201603852
[41] J. Li, D. Yan, T. Lu, Y. Yao, L. Pan, An advanced CoSe embedded within porous carbon polyhedra hybrid for high performance lithium-ion and sodium-ion batteries. Chem. Eng. J. 325, 14–24 (2017). http://dx.doi.org/10.1016/j.cej.2017.05.046
[42] J. Yang, H. Gao, S. Men, Z. Shi, Z. Lin, X. Kang, S. Chen, CoSe2 nanoparticles encapsulated by n-doped carbon framework intertwined with carbon nanotubes: high-performance dual-role anode materials for both Li- and Na-ion batteries. Adv. Sci. 1800763, 1800763 (2018). http://doi.wiley.com/10.1002/advs.201800763
[43] J. Gao, Y. Li, L. Shi, J. Li, G. Zhang, Rational design of hierarchical nanotubes through encapsulating CoSe2 nanoparticles into MoSe2/C composite shells with enhanced lithium and sodium storage performance. ACS Appl. Mater. Interfaces 10(24), 20635–20642 (2018). http://pubs.acs.org/doi/10.1021/acsami.8b06442
[44] Z. Li, H. Xue, J. Wang, Y. Tang, C.-S. Lee, S. Yang, Reduced graphene oxide/marcasite-type cobalt selenide nanocrystals as an anode for lithium-ion batteries with excellent cyclic performance. ChemElectroChem 2(11), 1682–1686 (2015). http://doi.wiley.com/10.1002/celc.201500179
[45] D. Chen, G. Chen, J. Pei, Y. Hu, Z. Qin, J. Wang, F. Wu, Formation of porous Cu-doped CoSe2 connected by nanoparticles for efficient lithium storage. ChemElectroChem 4(9), 2158–2163 (2017). http://doi.wiley.com/10.1002/celc.201700384
[46] Y. Yang, J. Liu, H.-Q. Dai, Y. Cui, J. Liu, X. Liu, and Z.-W. Fu, Pulsed laser deposited NiO–NiSe nanocomposite as a new anode material for lithium storage. J. Alloys Compd. 661, 190–195 (2016). https://doi.org/10.1016/j.jallcom.2015.11.119
[47] L. Mi, H. Sun, Q. Ding, W. Chen, C. Liu, H. Hou, Z. Zheng, C. Shen, 3D hierarchically patterned tubular NiSe with nano-/microstructures for Li ion battery design. Dalt. Trans. 41(40), 12595 (2012). http://doi.org/10.1039/C2DT31787G
[48] Z. Zhang, X. Shi, X. Yang, Synthesis of core-shell NiSe/C nanospheres as anodes for lithium and sodium storage. Electrochim. Acta 208, 238–243 (2016). http://doi.org/10.1016/j.electacta.2016.04.183
[49] A.D. Roberts, X. Li, H. Zhang, Porous carbon spheres and monoliths: morphology control, pore size tuning and their applications as Li-ion battery anode materials. Chem. Soc. Rev. 43(13), 4341–4356 (2014). http://doi.org/10.1039/C4CS00071D
[50] J. Liu, Y. Yang, X. Liu, M. Xue, J. Liu, Y. Cui, Facile synthesis and electrochemical properties of Fe2SeS for lithium ion batteries. J. Power Sources 306, 317–321 (2016). https://doi.org/10.1016/j.jpowsour.2015.11.113
[51] D. Wei, J. Liang, Y. Zhu, L. Hu, K. Zhang, J. Zhang, Z. Yuan, Y. Qian, Layer structured α-FeSe: A potential anode material for lithium storage. Electrochem. Commun. 38, 124–127 (2014). http://doi.org/10.1016/j.elecom.2013.11.021
[52] K. Mizushima, P. Jones, P. Wiseman, J. Goodenough, LixCoO2 (0  x  1): a new cathode material for batteries of high energy density. Solid State Ion. 3–4(C), 171–174 (1981).  https://doi.org/10.1016/0167-2738(81)90077-1
[53] B.L. Ellis, W.R.M. Makahnouk, Y. Makimura, K. Toghill, L.F. Nazar, A multifunctional iron-based phosphate cathode for rechargeable batteries. Nat. Mater. 6(10), 749–753 (2007). https://doi.org/10.1038/nmat2007
[54] Y. Zhang, A. Pan, L. Ding, Z. Zhou, Y. Wang, S. Niu, S. Liang, G. Cao, Nitrogen-doped yolk–shell-structured CoSe/C dodecahedra for high-performance sodium ion batteries. ACS Appl. Mater. Interfaces 9(4), 3624–3633 (2017). https://doi.org/10.1021/acsami.6b13153
[55] G.D. Park, Y.C. Kang, One-pot synthesis of CoSex–rGO composite powders by spray pyrolysis and their application as anode material for sodium-ion batteries. Chem. A Eur. J. 22(4), 4140–4146 (2016). https://doi.org/10.1002/chem.201504398
[56] X. Yang, J. Zhang, Z. Wang, H. Wang, C. Zhi, D.Y.W. Yu, A.L. Rogach, One-pot synthesis of CoSex–rGO composite powders by spray pyrolysis and their application as anode material for sodium-ion batteries. Small 14(7), 1702669 (2018). https://doi.org/10.1002/smll.201702669
[57] J.-S. Park, Y. Chan Kang, Multicomponent (Mo, Ni) metal sulfide and selenide microspheres with empty nanovoids as anode materials for Na-ion batteries. J. Mater. Chem. A 5(18), 8616–8623 (2017). https://doi.org/10.1039/C7TA01088E
[58] D. Li, J. Zhou, X. Chen, H. Song, Achieving ultrafast and stable Na-ion storage in FeSe2 nanorods/graphene anodes by controlling the surface oxide. ACS Appl. Mater. Interfaces 10(26), 22841–22850 (2018). https://doi.org/10.1021/acsami.8b06318
[59] X. Wei, C. Tang, Q. An, M. Yan, X. Wang, P. Hu, X. Cai, L. Mai, FeSe2 clusters with excellent cyclability and rate capability for sodium-ion batteries. Nano Res. 10(9), 3202–3211 (2017). https://doi.org/10.1007/s12274-017-1537-z
[60] G.D. Park, J.S. Cho, J.-K. Lee, Y.C. Kang, Na-ion storage performances of FeSex and Fe2O3 hollow nanoparticles-decorated reduced graphene oxide balls prepared by nanoscale Kirkendall diffusion process. Sci. Rep. 6(1), 22432 (2016). https://doi.org/10.1038/srep22432
[61] X. Xu, J. Liu, J. Liu, L. Ouyang, R. Hu, H. Wang, L. Yang, M. Zhu, A general metal-organic framework (MOF)-derived selenidation strategy for in situ carbon-encapsulated metal selenides as high-rate anodes for Na-ion batteries. Adv. Funct. Mater. 28(16), 1 (2018). https://doi.org/10.1002/adfm.201707573
[62] Z. Ali, M. Asif, X. Huang, T. Tang, Y. Hou, Hierarchically porous Fe2CoSe4 binary-metal selenide for extraordinary rate performance and durable anode of sodium-ion batteries. Adv. Mater. 30(36), 1–9 (2018). https://doi.org/10.1002/adma.201802745
[63] Y. Duan, Q. Tang, B. He, Z. Zhao, L. Zhu, L. Yu, Bifacial dye-sensitized solar cells with transparent cobalt selenide alloy counter electrodes. J. Power Sources 284, 349–354 (2015). https://doi.org/10.1016/j.jpowsour.2015.03.045
[64] J. Liu, Q. Tang, B. He, L. Yu, Cost-effective bifacial dye-sensitized solar cells with transparent iron selenide counter electrodes. An avenue of enhancing rear-side electricity generation capability. J. Power Sources 275, 288–293 (2015). https://doi.org/10.1016/j.jpowsour.2014.10.152
[65] Y. Li, H. Peng, L. Yang, H. Dong, P. Xiao, Investigating the effect of sulfur and selenium on the electrochemical properties of nickel–cobalt oxides: enhanced charge capacity and composition–property relationships. J. Mater. Sci. 51(15), 7108–7118 (2016). https://doi.org/10.1007/s10853-016-9968-6
[66] M.-Z. Xue, Z.-W. Fu, Lithium electrochemistry of NiSe2: a new kind of storage energy material. Electrochem. Commun. 8(12), 1855–1862 (2006). https://doi.org/10.1016/j.elecom.2006.08.025
[67] J. Yang, H. Gao, D. Ma, J. Zou, Z. Lin, X. Kang, S. Chen, High-performance Li–Se battery cathode based on CoSe2-porous carbon composites. Electrochim. Acta 264, 341–349 (2018). https://doi.org/10.1016/j.electacta.2018.01.105
[68] P. Geng, S. Zheng, H. Tang, R. Zhu, L. Zhang, S. Cao, H. Xue, H. Pang, Transition metal sulfides based on graphene for electrochemical energy storage. Adv. Energy Mater. 8(15), 1703259 (2018). https://doi.org/10.1002/aenm.201703259
[69] J.S. Cho, J.-S. Park, K.M. Jeon, Y. Chan Kang, 1-D nanostructure comprising porous Fe2O3/Se composite nanorods with numerous nanovoids, and their electrochemical properties for use in lithium-ion batteries. J. Mater. Chem. A 5(21), 10632–10639 (2017). https://doi.org/10.1039/C7TA02616A
[70] E.S. Davydova, I.N. Atamanyuk, A.S. Ilyukhin, E.I. Shkolnikov, A.Z. Zhuk, Nitrogen-doped carbonaceous catalysts for gas-diffusion cathodes for alkaline aluminum-air batteries. J. Power Sources 306, 329–336 (2016). https://doi.org/10.1016/j.elecom.2013.11.021
[71] G.D. Park, J.S. Cho, J.K. Lee, Y.C. Kang, Na-ion storage performances of FeSex and Fe2O3 hollow nanoparticles-decorated reduced graphene oxide balls prepared by nanoscale kirkendall diffusion process. Sci. Rep. 6, 1–10 (2016). https://doi.org/10.1038/srep22432
[72] D.P. Dubal, O. Ayyad, V. Ruiz, P. Gómez-Romero, Hybrid energy storage: the merging of battery and supercapacitor chemistries. Chem. Soc. Rev. 44(7), 1777–1790 (2015). https://doi.org/10.1039/C4CS00266K
[73] Y. Zhu, Z. Huang, Z. Hu, L. Xi, X. Ji, Y. Liu, 3D interconnected ultrathin cobalt selenide nanosheets as cathode materials for hybrid supercapacitors. Electrochim. Acta 269, 30–37 (2018). https://doi.org/10.1016/j.electacta.2018.02.146
[74] G. Ma, F. Hua, K. Sun, E. Fenga, H. Peng, Z. Zhang, Z. Lei, Nanostructure selenium compounds as pseudocapacitive electrodes for high-performance asymmetric supercapacitor. R. Soc. Open Sci. 5(1), 171186 (2018). https://doi.org/10.1098/rsos.171186
[75] B. Kirubasankar, V. Murugadoss, S. Angaiah, Hydrothermal assisted in situ growth of CoSe onto graphene nanosheets as a nanohybrid positive electrode for asymmetric supercapacitors. RSC Adv. 7(10), 5853–5862 (2017). https://doi.org/10.1039/C6RA25078E
[76] Y. Zhang, A. Pan, Y. Wang, X. Cao, Z. Zhou, T. Zhu, S. Liang, G. Cao, Self-templated synthesis of N-doped CoSe2/C double-shelled dodecahedra for high-performance supercapacitors. Energy Storage Mater. 8, 28–34 (2017). https://doi.org/10.1016/j.ensm.2017.03.005
[77] C. Gong, M. Huang, P. Zhou, Z. Sun, L. Fan, J. Lin, J. Wu, Mesoporous Co0.85Se nanosheets supported on Ni foam as a positive electrode material for asymmetric supercapacitor. Appl. Surf. Sci. 362, 469–476 (2016). https://doi.org/10.1016/j.apsusc.2015.11.194
[78] S. Tang, S. Vongehr, Y. Wang, J. Cui, X. Wang, X. Meng, Versatile synthesis of high surface area multi-metallic nanosponges allowing control over nanostructure and alloying for catalysis and sers detection. J. Mater. Chem. A 2(10), 3648–3660 (2014). https://doi.org/10.1039/C3TA14541G
[79] H. Peng, J. Zhou, K. Sun, G. Ma, Z. Zhang, E. Feng, Z. Lei, High-performance asymmetric supercapacitor designed with a novel NiSe@MoSe>2 nanosheet array and nitrogen-doped carbon nanosheet. ACS Sustain. Chem. Eng. 5(7), 5951–5963 (2017). https://doi.org/10.1021/acssuschemeng.7b00729
[80] Y. Tian, Y. Ruan, J. Zhang, Z. Yang, J. Jiang, C. Wang, Controllable growth of NiSe nanorod arrays via one-pot hydrothermal method for high areal-capacitance supercapacitors. Electrochim. Acta 250, 327–334 (2017). https://doi.org/10.1016/j.electacta.2017.08.084
[81] B. Chen, Y. Tian, Z. Yang, Y. Ruan, J. Jiang, C. Wang, Construction of (Ni, Cu) Se2//reduced graphene oxide for high energy density asymmetric supercapacitor. ChemElectroChem 4(11), 3004–3010 (2017). https://doi.org/10.1002/celc.201700742
[82] Q. Bao, J. Wu, L. Fan, J. Ge, J. Dong, J. Jia, J. Zeng, J. Lin, Electrodeposited NiSe2 on carbon fiber cloth as a flexible electrode for high-performance supercapacitors. J. Energy Chem. 26(6), 1252–1259 (2017). https://doi.org/10.1016/j.jechem.2017.09.023[83] Z. Tang, C. Jia, Z. Wan, Q. Zhou, X. Ye, Y. Zhu, Facile preparation of CoNi2S4 @NiSe nano arrays on compressed nickel foam for high performance flexible supercapacitors. RSC Adv. 6(113), 112307–112316 (2016). https://doi.org/10.1039/C6RA20871A
[84] K. Guo, F. Yang, S. Cui, W. Chen, L. Mi, Controlled synthesis of 3D hierarchical NiSe microspheres for high-performance supercapacitor design. RSC Adv. 6(52), 46523–46530 (2016). https://doi.org/10.1039/C6RA06909F
[85] P. Yang, Z. Wu, Y. Jiang, Z. Pan, W. Tian, L. Jiang, L. Hu, Fractal (NixCo1−x)9Se8 nanodendrite arrays with highly exposed (011) surface for wearable, all-solid-state supercapacitor. Adv. Energy Mater. 8(26), 1801392 (2018). https://doi.org/10.1002/aenm.201801392
[86] H. Chen, M. Fan, C. Li, G. Tian, C. Lv, D. Chen, K. Shu, J. Jiang, One-pot synthesis of hollow NiSe–CoSe nanoparticles with improved performance for hybrid supercapacitors. J. Power Sources 329, 314–322 (2016). https://doi.org/10.1016/j.jpowsour.2016.08.097
[87] C. Zhang, M. Hou, X. Cai, J. Lin, X. Liu et al., One-step coaxial electrodeposition of Co0.85Se on CoNi2S4 nanotube arrays for flexible solid-state asymmetric supercapacitors. J. Mater. Chem. A 6(32), 15630–15639 (2018). https://doi.org/10.1039/C8TA05131C
[88] Y. Liang, H. Wang, J. Zhou, Y. Li, J. Wang, T. Regier, H. Dai, Covalent hybrid of spinel manganese–cobalt oxide and graphene as advanced oxygen reduction electrocatalysts. J. Am. Chem. Soc. 134(7), 3517–3523 (2012). https://doi.org/10.1021/ja210924t
[89] M. Lefèvre, E. Proietti, F. Jaouen, J.-P. Dodelet, Iron-based catalysts with improved oxygen reduction activity in polymer electrolyte fuel cells. Science 324(5923), 71–74 (2009)
[90] R. Cao, R. Thapa, H. Kim, X. Xu, M. Gyu Kim et al., Promotion of oxygen reduction by a bio-inspired tethered iron phthalocyanine carbon nanotube-based catalyst. Nat. Commun. 4(1), 2076 (2013). https://doi.org/10.1038/ncomms3076
[91] C. Xu, Z. Lin, D. Zhao, Y. Sun, Y. Zhong et al., Facile in situ fabrication of Co nanoparticles embedded in 3D N-enriched mesoporous carbon foam electrocatalyst with enhanced activity and stability toward oxygen reduction reaction. J. Mater. Sci. 54(7), 5412–5423 (2019). https://doi.org/10.1007/s10853-018-03255-0
[92] S. Wen, K. Qin, P. Liu, N. Zhao, L. Ma, C. Shi, E. Liu, Ultrahigh volumetric capacitance and cycle stability via structure design and synergistic action between CoMoO4 nanosheets and 3D porous Ni–Co film. Appl. Surf. Sci. 465, 389–396 (2019). https://doi.org/10.1016/j.apsusc.2018.09.207
[93] L. Ding, Q. Xin, X. Zhou, J. Qiao, H. Li, H. Wang, Electrochemical behavior of nanostructured nickel phthalocyanine (NiPc/C) for oxygen reduction reaction in alkaline media. J. Appl. Electrochem. 43(1), 43–51 (2013). https://doi.org/10.1007/s10800-012-0503-4
[94] D. Shin, B. Jeong, B.S. Mun, H. Jeon, H.-J. Shin, J. Baik, J. Lee, On the origin of electrocatalytic oxygen reduction reaction on electrospun nitrogen–carbon species. J. Phys. Chem. C 117(22), 11619–11624 (2013). https://doi.org/10.1021/jp401186a
[95] S. Liu, Z. Zhang, J. Bao, Y. Lan, W. Tu, M. Han, Z. Dai, Controllable synthesis of tetragonal and cubic phase Cu2Se nanowires assembled by small nanocubes and their electrocatalytic performance for oxygen reduction reaction. J. Phys. Chem. C 117(29), 15164–15173 (2013). https://doi.org/10.1021/jp4044122
[96] L. Yang, S. Jiang, Y. Zhao, L. Zhu, S. Chen, Boron-doped carbon nanotubes as metal-free electrocatalysts for the oxygen reduction reaction. Angew. Chem. Int. Ed. 50(31), 7132–7135 (2011). https://doi.org/10.1002/anie.201101287
[97] K. Gong, F. Du, Z. Xia, M. Durstock, L. Dai, Nitrogen-doped carbon nanotube arrays with high electrocatalytic activity for oxygen reduction. Science 323(5915), 760–764 (2009). https://doi.org/10.1126/science.1168049
[98] T. Hibino, K. Kobayashi, P. Heo, Oxygen reduction reaction over nitrogen-doped graphene oxide cathodes in acid and alkaline fuel cells at intermediate temperatures. Electrochim. Acta 112, 82–89 (2013). https://doi.org/10.1016/j.electacta.2013.08.101
[99] J. Wu, Z. Yang, X. Li, Q. Sun, C. Jin, P. Strasser, R. Yang, Phosphorus-doped porous carbons as efficient electrocatalysts for oxygen reduction. J. Mater. Chem. A 1(34), 9889–9896 (2013). https://doi.org/10.1039/C3TA11849E
[100] J. Zhu, G. He, L. Liang, Q. Wan, P.K. Shen, Direct anchoring of platinum nanoparticles on nitrogen and phosphorus-dual-doped carbon nanotube arrays for oxygen reduction reaction. Electrochim. Acta 158, 374–382 (2015). https://doi.org/10.1016/j.electacta.2015.01.173
[101] J. Liang, Y. Jiao, M. Jaroniec, S.Z. Qiao, Sulfur and nitrogen dual-doped mesoporous graphene electrocatalyst for oxygen reduction with synergistically enhanced performance. Angew. Chem. Int. Ed. 51(46), 11496–11500 (2012). https://doi.org/10.1002/anie.201206720
[102] D. Susac, L. Zhu, M. Teo, A. Sode, K.C. Wong et al., Characterization of FeS2-based thin films as model catalysts for the oxygen reduction reaction. J. Phys. Chem. C 111(50), 18715–18723 (2007). https://doi.org/10.1021/jp073395i
[103] Z. Jin, H. Nie, Z. Yang, J. Zhang, Z. Liu, X. Xu, S. Huang, Metal-free selenium doped carbon nanotube/graphene networks as a synergistically improved cathode catalyst for oxygen reduction reaction. Nanoscale 4(20), 6455–6460 (2012). https://doi.org/10.1039/C2NR31858J
[104] L.F. Zhang, C.Y. Zhang, Multifunctional Co0.85Se/graphene hybrid nanosheets: Controlled synthesis and enhanced performances for the oxygen reduction reaction and decomposition of hydrazine hydrate. Nanoscale 6(3), 1782–1789 (2014). https://doi.org/10.1039/C3NR05509D
[105] Y.S. Chao, D.S. Tsai, A.P. Wu, L.W. Tseng, Y.S. Huang, Cobalt selenide electrocatalyst supported by nitrogen-doped carbon and its stable activity toward oxygen reduction reaction. Int. J. Hydrog. Energy 38(14), 5655–5664 (2013). https://doi.org/10.1016/j.ijhydene.2013.03.006
[106] D. Zhao, S. Zhang, G. Yin, C. Du, Z. Wang, J. Wei, Effect of Se in Co-based selenides towards oxygen reduction electrocatalytic activity. J. Power Sources 206, 103–107 (2012). https://doi.org/10.1016/j.jpowsour.2012.01.018
[107] P. Nekooi, M. Akbari, M.K. Amini, CoSe nanoparticles prepared by the microwave-assisted polyol method as an alcohol and formic acid tolerant oxygen reduction catalyst. Renew. Energy 35(12), 6392–6398 (2010). https://doi.org/10.1016/j.ijhydene.2010.03.134
[108] L. Zhu, D. Susac, A. Lam, M. Teo, P.C. Wong, D. Bizzotto, S.A. Campbell, R.R. Parsons, K.A.R. Mitchell, Structure of sputtered Co–Se thin films prepared for an application in catalysis. J. Solid State Chem. 179(12), 3942–3948 (2006). https://doi.org/10.1016/j.jssc.2006.08.028
[109] Q. Zheng, X. Cheng, H. Li, Microwave synthesis of high activity FeSe2/C catalyst toward oxygen reduction reaction. Catalysts 5(3), 1079–1091 (2015). https://doi.org/10.3390/catal5031079
[110] A. Ezeta, E.M. Arce, O. Solorza, R.G. González, H. Dorantes, Effect of the leaching of Ru–Se–Fe and Ru–Mo–Fe obtained by mechanical alloying on electrocatalytical behavior for the oxygen reduction reaction. J. Alloys Compd. 483(1–2), 429–431 (2009). https://doi.org/10.1016/j.jallcom.2008.08.115
[111] S.P. Chiao, D.S. Tsai, D.P. Wilkinson, Y.M. Chen, Y.S. Huang, Carbon supported Ru1−xFexSey electrocatalysts of pyrite structure for oxygen reduction reaction. Int. J. Hydrog. Energy 35(13), 6508–6517 (2010). https://doi.org/10.1016/j.ijhydene.2010.04.032
[112] C. Dai, X. Tian, Y. Nie, C. Tian, C. Yang, Z. Zhou, Y. Li, X. Gao, Successful synthesis of 3D CoSe2 hollow microspheres with high surface roughness and its excellent performance in catalytic hydrogen evolution reaction. Chem. Eng. J. 321, 105–112 (2017). https://doi.org/10.1016/j.cej.2017.03.068
[113] X. Chen, Y. Qiu, G. Liu, W. Zheng, W. Feng et al., Tuning electrochemical catalytic activity of defective 2D terrace MoSe2 heterogeneous catalyst: via cobalt doping. J. Mater. Chem. A 5(22), 11357–11363 (2017). https://doi.org/10.1039/C7TA02327H
[114] W. Zhou, J. Lu, K. Zhou, L. Yang, Y. Ke, Z. Tang, S. Chen, CoSe2 nanoparticles embedded defective carbon nanotubes derived from MOFs as efficient electrocatalyst for hydrogen evolution reaction. Nano Energy 28, 143–150 (2016). https://doi.org/10.1016/j.nanoen.2016.08.040
[115] X. Chang, J. Jian, G. Cai, R. Wu, J. Li, Three-dimensional FeSe2 microflowers assembled by nanosheets: synthesis, optical properties, and catalytic activity for the hydrogen evolution reaction. Electron. Mater. Lett. 12(2), 237–242 (2016). https://doi.org/10.1007/s13391-016-5377-x
[116] M. Xiao, Z. Zhang, Y. Tian, Y. Miao, J. Wang, Co–Fe–Se ultrathin nanosheet-fabricated microspheres for efficient electrocatalysis of hydrogen evolution. J. Appl. Electrochem. 47(3), 361–367 (2017). https://doi.org/10.1007/s10800-016-1014-5
[117] J. Du, Z. Zou, C. Liu, C. Xu, Hierarchical Fe-doped Ni3Se4 ultrathin nanosheets as an efficient electrocatalyst for oxygen evolution reaction. Nanoscale 10, 5163–5170 (2018). https://doi.org/10.1039/c8nr00426a
[118] J. Yu, G. Cheng, W. Luo, 3D mesoporous rose-like nickel-iron selenide microspheres as advanced electrocatalysts for the oxygen evolution reaction. Nano Res. 11(4), 2149–2158 (2018). https://doi.org/10.1007/s12274-017-1832-8
[119] R. Bose, V.R. Jothi, D.B. Velusamy, P. Arunkumar, S.C. Yi, A highly effective, stable oxygen evolution catalyst derived from transition metal selenides and phosphides. Part. Part. Syst. Charact. 35(8), 1800135 (2018). https://doi.org/10.1002/ppsc.201800135
[120] Y. Hou, M.R. Lohe, J. Zhang, S. Liu, X. Zhuang, X. Feng, Vertically oriented cobalt selenide/NiFe layered-double-hydroxide nanosheets supported on exfoliated graphene foil: an efficient 3D electrode for overall water splitting. Energy Environ. Sci. 9(2), 478–483 (2016). https://doi.org/10.1039/C5EE03440J
[121] X. Zhang, M. Zhen, J. Bai, S. Jin, L. Liu, Efficient NiSe–Ni3Se2/graphene electrocatalyst in dye-sensitized solar cells: the role of hollow hybrid nanostructure. ACS Appl. Mater. Interfaces 8(27), 17187–17193 (2016). https://doi.org/10.1021/acsami.6b02350
[122] K. Xu, H. Ding, K. Jia, X. Lu, P. Chen et al., Solution–liquid–solid synthesis of hexagonal nickel selenide nanowire arrays with a nonmetal catalyst. Angew. Chem. Int. Ed. 55(5), 1710–1713 (2016). https://doi.org/10.1002/anie.201508704
[123] Y.J. Kim, K. Yuan, B.R. Ellis, U. Becker, Redox reactions of selenium as catalyzed by magnetite: lessons learned from using electrochemistry and spectroscopic methods. Geochim. Cosmochim. Acta 199, 304–323 (2017). https://doi.org/10.1016/j.gca.2016.10.039
[124] F. Qiao, Z. Wang, K. Xu, S. Ai, Double enzymatic cascade reactions within FeSe–Pt@SiO>2 nanospheres: synthesis and application toward colorimetric biosensing of H2O2 and glucose. Analyst 140(19), 6684–6691 (2015). https://doi.org/10.1039/C5AN01268F
[125] L. Shao, X. Qian, H. Li, C. Xu, L. Hou, Shape-controllable syntheses of ternary Ni–Co–Se alloy hollow microspheres as highly efficient catalytic materials for dye-sensitized solar cells. Chem. Eng. J. 315, 562–572 (2017). https://doi.org/10.1016/j.cej.2017.01.055
[126] E. Reisner, J.C. Fontecilla-Camps, F.A. Armstrong, Catalytic electrochemistry of a [NiFeSe]-hydrogenase on TiO2 and demonstration of its suitability for visible-light driven H2 production. Chem. Commun. 550–552 (2009). https://doi.org/10.1039/B817371K
[127] C. Wombwell, E. Reisner, Synthetic active site model of the [NiFeSe] hydrogenase. Chem. A Eur. J. 21(22), 8096–8104 (2015). https://doi.org/10.1002/chem.201500311
[128] M.G. Walter, E.L. Warren, J.R. McKone, S.W. Boettcher, Q. Mi, E.A. Santori, N.S. Lewis, Solar water splitting cells. Chem. Rev. 110(11), 6446–6473 (2010). https://doi.org/10.1021/cr1002326
[129] F.E. Osterloh, Inorganic nanostructures for photoelectrochemical and photocatalytic water splitting. Chem. Soc. Rev. 42(6), 2294–2320 (2013). https://doi.org/10.1039/C2CS35266D
[130] L. An, Y. Li, M. Luo, J. Yin, Y.Q. Zhao et al., Atomic-level coupled interfaces and lattice distortion on CuS/NiS2 nanocrystals boost oxygen catalysis for flexible Zn-air batteries. Adv. Funct. Mater. 27(42), 1–9 (2017). https://doi.org/10.1002/adfm.201703779
[131] X. Chen, B. Liu, C. Zhong, Z. Liu, J. Liu et al., Ultrathin Co3O4 layers with large contact area on carbon fibers as high-performance electrode for flexible zinc–air battery integrated with flexible display. Adv. Energy Mater. 7(18), 1–11 (2017). https://doi.org/10.1002/aenm.201700779
[132] Y. Liu, H. Cheng, M. Lyu, S. Fan, Q. Liu et al., Low overpotential in vacancies-rich ultrathin CoSe2 nanosheets for water oxidation. J. Am. Chem. Soc. 136, 15670–15675 (2014). https://doi.org/10.1021/ja5085157
[133] A. Sivanantham, S. Shanmugam, Nickel selenide supported on nickel foam as an efficient and durable non-precious electrocatalyst for the alkaline water electrolysis. Appl. Catal. B Environ. 203, 485–493 (2017). https://doi.org/10.1016/j.apcatb.2016.10.050
[134] Z. Zhuang, Q. Peng, J. Zhuang, X. Wang, Y. Li, Controlled hydrothermal synthesis and structural characterization of a nickel selenide series. Chem. A Eur. J. 12(1), 211–217 (2006). https://doi.org/10.1002/chem.200500724
[135] B. Anugop, S. Prasanth, D. Rithesh Raj, T.V. Vineeshkumar, S. Pranitha, V.P. Mahadevan Pillai, C. Sudarsanakumar, Role of Mn2+ concentration in the linear and nonlinear optical properties of Ni1−xMnxSe nanoparticles. Opt. Mater. 62, 297–305 (2016). https://doi.org/10.1016/j.optmat.2016.10.017
[136] T. Wang, X. Li, Y. Jiang, Y. Zhou, L. Jia, C. Wang, Reduced graphene oxide-polyimide/carbon nanotube film decorated with NiSe nanoparticles for electrocatalytic hydrogen evolution reactions. Electrochim. Acta 243, 291–298 (2017). https://doi.org/10.1016/j.electacta.2017.05.084
[137] X. Zheng, X. Han, H. Liu, J. Chen, D. Fu, J. Wang, C. Zhong, Y. Deng, W. Hu, Controllable synthesis of NixSe (0.5 x 1) nanocrystals for efficient rechargeable zinc–air batteries and water splitting. ACS Appl. Mater. Interfaces 10(16), 13675–13684 (2018). https://doi.org/10.1021/acsami.8b01651
[138] J. Zheng, Q. Gong, X. Cheng, S. Gong, W. Yang, L. Huang, Microwave synthesis of carbon-supported cobalt nickel selenide ternary catalyst toward the oxygen reduction reaction. ChemElectroChem 5(14), 2019–2028 (2018). https://doi.org/10.1002/celc.201800190

Citation Information

Huijie Zhou, Xiaxia Li, Yan Li, Mingbo Zheng, Huan Pang, Applications of MxSey (M = Fe, Co, Ni) and their Composites in Electrochemical Energy Storage and Conversion. Nano-Micro Lett.(2019) 11: 40. https://doi.org/10.1007/s40820-019-0272-2

History

Received: 3 March 2019 / Accepted: 14 April 2019 / Published online: 15 May 2019


Additional Info

  • Type of Publishing: JOUR - Journal
  • Title: Applications of MxSey (M = Fe, Co, Ni) and their Composites in Electrochemical Energy Storage and Conversion
  • Author: Huijie Zhou, Xiaxia Li, Yan Li, Mingbo Zheng, Huan Pang
  • Year: 2019
  • Volume: 11
  • Journal Name: Nano-Micro Letters
  • ISSN: 2150-5551
  • URL: http://dx.doi.org/10.1007/s40820-019-0272-2
  • Abstract: Transition metal selenides (MxSey, M = Fe, Co, Ni) and their composites exhibit good storage capacities for sodium and lithium ions and occupy a unique position in research on sodium-ion and lithium-ion batteries. MxSey and their composites are used as active materials to improve catalytic activity. However, low electrical conductivity, poor cycle stability, and low rate performance, severely limit their applications. This review provides a comprehensive introduction to and understanding of the current research progress of MxSey and their composites. Moreover, this review proposes a broader research platform for these materials, including various bioelectrocatalytic performance tests, lithium–sulfur batteries, and fuel cells. The synthesis method and related mechanisms of MxSey and their composites are reviewed, and the effects of material morphologies on their electrochemical performance are discussed. The advantages and disadvantages of MxSey and their composites as well as possible strategies for improving the storage and conversion of electrochemical energy are also summarized.
  • Publish Date: Wednesday, 15 May 2019
  • Start Page: 40
  • DOI: 10.1007/s40820-019-0272-2