Nano-Micro Letters

Single-Atom Catalysts for Electrochemical Hydrogen Evolution Reaction: Recent Advances and Future Perspectives

View ResearcherID and ORCID

Zonghua Pu1, 2, Ibrahim Saana Amiinu2, Ruilin Cheng2, Pengyan Wang2, Chengtian Zhang2, Shichun Mu2, *,Weiyue Zhao3, Fengmei Su4, Gaixia Zhang1, *, Shijun Liao3, *, Shuhui Sun1, *

Abstract
icon-htmlFull Text Html
icon-pdf-smPDF w/ Links
icon-citExport Citation
Figures
+Show more

Nano-Micro Lett. (2020) 12: 21

First Online: 13 January 2020 (Review)

DOI:10.1007/s40820-019-0349-y

*Corresponding author. E-mail: msc@whut.edu.cn (S.Mu); gaixia.zhang@emt.inrs.ca (G. Zhang); chsjliao@scut.edu.cn (S. Liao); shuhui@emt.inrs.ca (S. Sun)

 

Abstract

 


Toc

Hydrogen, a renewable and outstanding energy carrier with zero carbon dioxide emission, is regarded as the best alternative to fossil fuels. The most preferred route to large-scale production of hydrogen is by water electrolysis from the intermittent sources (e.g., wind, solar, hydro, and tidal energy). However, the efficiency of water electrolysis is very much dependent on the activity of electrocatalysts. Thus, designing high-effective, stable, and cheap materials for hydrogen evolution reaction (HER) could have a substantial impact on renewable energy technologies. Recently, single-atom catalysts (SACs) have emerged as a new frontier in catalysis science, due to SACs have maximum atom-utilization efficiency and excellent catalytic reaction activity. Various synthesis methods and analytical techniques have been adopted to prepare and characterize these SACs. In this review, we discuss recent progress on SACs synthesis, characterization methods, and their catalytic applications. Especially, we highlight their unique electrochemical characteristics towards HER. Finally, the current key challenges in SACs for HER are pointed out and some potential directions are proposed as well.


 

Keywords

Single-atom catalysts; Nanomaterials; Electrocatalyst; Hydrogen evolution reaction; Electrochemical energy conversion

 

Full Text Html

1 Introduction

    With the depletion of fossil fuels (coal, oil, and natural gas), heavily environmental pollution and climate change, the exploitation of safe, clean, efficient, sustainable, and environmental-friendly energy sources has become a major societal and technological pursuit in the 21st century [1-7]. Hydrogen is considered as a viable substitute for fossil fuels in the future because of its renewability, zero carbon dioxide emission, and high mass-specific energy density [8-12]. Among the hydrogen production method, water electrolysis is an attractive way due to its device simplicity, high product purity, and renewability [13-17]. The process of water electrolysis based upon two half-reactions: one reaction is oxygen evolution reaction (OER) and the other reaction is hydrogen evolution reaction (HER) [18-28]. Although water electrolysis has received much attention, the implementation of efficient water splitting technology is still a huge challenge due to the kinetic barrier of both reactions. In fact, both HER and OER suffer from high overpotentials or low Faradic yields for electrodes which lead to low energy utilization [29-40]. In order to overcome these problems, appropriate catalysts are needed to improve electrode efficiency by decreasing the activation energy and increasing the conversion efficiency. In other words, catalysts materials play an important role in improving the performance of both HER and OER. Currently, Pt group electrocatalysts are regarded as the benchmark for HER because they exhibit excellent activity over the pH range from 0 to 14 [41-53]. Nevertheless, the high cost, poor stability, and the low availability of noble metal limit their wide applications. Therefore, it is highly urgent to develop low-cost, highly active, and sustainable electrocatalytic materials for HER. For this purpose, extensive efforts have been devoted to preparing low-Pt even non-Pt based electrocatalytic materials [54-72].
    Single atom catalysts (SACs), with only isolated single atom dispersion on the support surface, have attracted extensive attention in many kinds of catalysis community recently due to their maximum atom utilization efficiency, high selectivity and unique properties [73-80]. The first reported SACs by Zhang’s groups occurred in 2011 where a co-precipitation method was employed to synthesis Pt SACs on iron oxide substrate (Pt1/FeOx), showing high performance and durability towards the CO oxidation [74]. Compared with other heterogeneous materials, SACs not only possess homogenized active species for catalytic reactions which are similar to homogeneous materials, but also have extra advantages of high reusability and durability that originate from heterogeneous materials. Therefore, SACs have great advantages [73, 81-86]. Given this unique characteristic, SACs have attracted extensive attention in various kinds of catalytic applications, including HER, OER, organic catalytic reaction, oxygen reduction reaction (ORR), N2 reduction reaction (NRR), CO2 reduction reaction (CO2RR) and other important reactions [74, 87-124]. In addition, advanced characterization techniques including scanning tunneling microscope (STM), aberration-corrected high angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM), Synchrotron-radiated X-ray absorption fine structure (XAFS) spectroscopy etc. are widely adopted for the characterization of SACs, which can directly measure the single atom to confirm the structure and electronic properties of SACs including a confirmation of the single metal atom, the chemical state of the metal center, and the coordination environment [122, 125]. Furthermore, density functional theory (DFT) simulation has brought unprecedented to discovering catalytic reaction mechanisms, enabling the rational design of materials with tailored activity.
    In this review, we focus on SACs towards HER, with a much more comprehensive and detailed introduction and discussions. We first highlight several novel synthetic methods, especially the atomic layer deposition (ALD), the metal-organic framework (MOF)-derived strategy and vacancies/defects immobilized methodology, for SACs synthesis. Next, to reveal the structures and compositions of SACs, different characterization techniques, such as XAFS spectroscopy, AC-HAADF-STEM techniques, and DFT simulation have been summarized and discussed. In addition, Pt, Pd, Ru, Fe, Co, Ni, Mo, W, V, etc. metal-based SACs in electrocatalytic HER have been systematically reviewed. Finally, the current key challenges in SACs for electrochemical HER are pointed out and some potential strategies/perspectives are proposed as well. Thus, this review covers the key aspects of SACs for hydrogen production via HER, including key synthesis strategies, evidence-based characterizations, and impact in the field of hydrogen production. We believe it is of great importance and interest to the development of SACs toward the application of HER, and it can be extended to other fields as well.

2 Synthetic Strategies

    In general, it is still a huge challenge to prepare SACs with robust structures and high performance due to its aggregation tendency. Fortunately, technological advances have evolved with effective methods to overcome such difficulties. In this rapidly developing area, some methods have been exploited for constructing SACs, including the wet-chemistry method, ALD, MOF-derived method, SiO2 template-assisted pyrolysis method, electrodeposition approach, high-temperature atom trapping method, vacancies/defects immobilized strategy, photochemical reduction, iced photochemical reduction, chemical reduction, hydrothermal reduction methods, and ambient synthetic strategy [52, 53, 74, 126-129]. In addition, some advantages and disadvantages of these synthesis strategies for preparing SACs have been listed in Table 1.

Table 1 Partial list of synthesis strategies for producing SACs

12 21 table1

2.1 Wet-Chemistry Strategies
    Generally, the wet-chemistry routes to prepare SACs involve three steps. The first involves the introduction of the metal species on various support via impregnation and coprecipitation. The second concerns drying and annealing, and the third is by reduction or activation [73]. In theory, SACs can be obtained by reducing the metal species loading to a fairly low level. However, on the one hand, in most catalytic reactions, more accessible catalytic active species are required. On the other hand, along with the reduced metal, the smaller particle size can also result in increased surface energy, thereby making the metal atoms easily aggregate into larger particles. Therefore, for the wet-chemistry approach, SACs require to be effectively embedded in the support in order to avoid aggregation of the metal atoms into metal nanoclusters or even large nanoparticles [122].
    The wet-chemistry strategy has been recognized as an effective method for the synthesis of metal single atoms supported on various oxide substrates. An added advantage of this method is that no specialized equipment is needed. Additionally, it is also the preferred method for potential large-scale production of supported metal catalysts. However, the wet-chemistry strategy has obvious disadvantages of preparing high metal loading materials [130]. For example, Zhang’s group successfully developed Pt SACs supported on FeOx (Pt1/FeOx) by the coprecipitation method with a Pt loading only ~0.18 wt%. The HAADF-STEM images of Pt1/FeOx further confirm the presence of Pt single atoms (Fig. 1a-d). In addition, DFT simulation (Fig. 1e) indicates that the most probable sites for Pt SACs are located on the O3-terminated surface. In other words, each Pt single atom is coordinated with three surface O atoms [77]. To date, all kinds of oxides substrate such as FeOx, TiO2, CeO2, Al2O3, and ZnO have been investigated as support materials for SACs of Pt, Ir, Rh, Au, and Pd [74, 131-136]. Such catalysts have displayed high catalytic performance towards the water-gas shift reaction, CO oxidation, and selective organic conversion reactions.

Fig. 1 a Pt SACs are uniformly distributed on the FeOx and b directly occupy the positions of the Fe atoms. c, d A mixture of SACs (in white circles), 2D Pt rafts consisting of less than ten Pt atoms (in black circles) and the size of 3D Pt clusters about 1 nm or less (white squares) are seen clearly. e DFT model of Pt1/FeOx.

Fig. 1 a Pt SACs are uniformly distributed on the FeOx and b directly occupy the positions of the Fe atoms. c, d A mixture of SACs (in white circles), 2D Pt rafts consisting of less than ten Pt atoms (in black circles) and the size of 3D Pt clusters about 1 nm or less (white squares) are seen clearly. e DFT model of Pt1/FeOx.

2.2 Atomic Layer Deposition Method
    In general, the ALD technique has been used to prepare metal oxide thin films with atomically precise control [137,138]. In 2013, the ALD technique was adopted to fabricate Pt SACs for the first time by Sun’s group [139]. As illustrated in Fig. 2a, the implanted oxygen atoms on the surface of graphene nanosheets can react with (methylcyclopentadienyl) trimethylplatinum (MeCpPtMe3), in which some of the organic linkers are converted into H2O, CO2, and hydrocarbon fragments, leading to the formation of Pt-containing monolayers. Next, the Pt-containing monolayer reacts with subsequent O2 to form a new absorbed oxygen layer on the Pt surface. This two-step process forms a whole ALD cycle. The morphology, size, and loading weight of Pt SACs can be adjusted by changing the number of ALD cycles (Fig. 2b-g). Using a similar method, Cheng and co-workers also prepared Pt SACs on the nitrogen-doped graphene (Fig. 2h). As shown in Fig. 2i, j, the size and loading density of the Pt catalyst can be well adjusted through changing the ALD cycles. More importantly, the obtained N-doped graphene nanosheets supported Pt SACs exhibit excellent HER catalytic activity [52]. Although using the ALD method, some noble metal Ru, Pt, and Pd SACs can be successfully grown on several types of substrates, such as SiO2, Al2O3, and TiO2 [52, 139-142]. It still suffers from low yields, high cost of equipment, and precursors, which is not favorable for widespread production [141-143].

Fig. 2 a Schematic illustrations of Pt ALD mechanism on graphene nanosheets. b-g present the results with (b, c) 50, (d, e) 100, and (f, g) 150 ALD cycles. h Schematic illustration of the Pt ALD mechanism on NGNs. HAADF-STEM images of ALDPt/NGNs samples with i 50 and j 100 ALD cycles.

Fig. 2 a Schematic illustrations of Pt ALD mechanism on graphene nanosheets. b-g present the results with (b, c) 50, (d, e) 100, and (f, g) 150 ALD cycles. h Schematic illustration of the Pt ALD mechanism on NGNs. HAADF-STEM images of ALDPt/NGNs samples with i 50 and j 100 ALD cycles.

2.3 MOF-Derived Method
    Metal-organic frameworks (MOFs), due to their high specific surface area, tunable porosity, and unique structures, have attracted enormous attention for many applications including catalysis, sensing, separation, and gas adsorption [146-149]. Researchers have obtained different functional MOFs by changing the metal ions and organic precursors. Very recently, a series of single atoms of Co, Fe, Ni, and W anchored on nitrogen-doped carbon frameworks have been fabricated by pyrolysis MOFs [39, 89, 150, 151]. Li and coworkers first reported that single Co atoms can be obtained by pyrolysis Zn/Co bimetallic zeolitic imidazolate framework (ZIF). Figure 3a illustrates the formation mechanism of Co SAs/N-C. During annealing, the Zn/Co bimetallic ZIF, the organic precursors of ZIFs are transformed into nitrogen-doped porous carbon (N-C). Subsequently, the Zn and Co ions are reduced by the N-C. Pre-meditated mixing of Zn can not only change the distance of adjacent Co atoms and provide N-rich centers, but also avoid the formation of Co-Co bonds under the high temperatures (~900 ℃). Finally, the Co single atoms (Co SAs) anchored on the N-C can be obtained after evaporation of low boiling point Zn atoms [39]. The HAADF-STEM images of the obtained Co SAs/N-C is illustrated in Fig. 3b-d. Electron energy loss spectrum (EELS) and X-ray absorption spectroscopy (XAS) characterization further confirm the formation of Co-N4 structure. Interestingly, such Co-N4 structure shows outstanding ORR catalytic activity with a 0.88 V half-wave potential (Fig. 3e). Similarly, Fe-Co dual SACs anchored on N-C have also been prepared by pyrolysis Fe/Co bimetallic ZIF (Fig. 3f-i) [152]. Additionally, the coordination number of Co SAs can be well adjusted by varying the pyrolysis temperature of Zn/Co bimetallic ZIF. For example, different Co-N coordination numbers of Co-N2, Co-N3, and Co-N4 can be selectively prepared at different pyrolysis temperatures (1000, 900, and 800 ℃) (Fig. 3j, k). These Co-N2, Co-N3, and Co-N4 structures have been also applied as effective CO2RR catalysts. As exhibited by the polarization curves in Fig. 3l, Co-N2 achieves the excellent catalytic activity towards CO2RR [147].

Fig. 3 a The schematic illustrations of Co SAs/N-C. b TEM, c, d HAADF-STEM images of Co SAs/N-C(800). e LSV of Co SAs/N-C, Co NPs-N/C, and Pt/C in O2-saturated 0.1 M KOH solutions. f Preparation of (Fe, Co)/N-C. g HAADF-STEM of (Fe, Co)/N-C. h Corresponding intensity profiles obtained on the zoomed areas in panel g. i Corresponding EELS mapping of Co, Fe, and N. j Schematic formation process of Co-N4 and Co-N2. k EXAFS spectra confirm the atomic dispersion of Co atoms in Co-N2, Co-N3 and Co-N4. l LSVs of Co-N2, Co-N3, Co-N4 and Co NPs.

Fig. 3 a The schematic illustrations of Co SAs/N-C. b TEM, c, d HAADF-STEM images of Co SAs/N-C(800). e LSV of Co SAs/N-C, Co NPs-N/C, and Pt/C in O2-saturated 0.1 M KOH solutions. f Preparation of (Fe, Co)/N-C. g HAADF-STEM of (Fe, Co)/N-C. h Corresponding intensity profiles obtained on the zoomed areas in panel g. i Corresponding EELS mapping of Co, Fe, and N. j Schematic formation process of Co-N4 and Co-N2. k EXAFS spectra confirm the atomic dispersion of Co atoms in Co-N2, Co-N3 and Co-N4. l LSVs of Co-N2, Co-N3, Co-N4 and Co NPs.

    The molecular-scale cavities within MOFs are usually interconnected by pores. Thus, metal species with an appropriate size can be encapsulated and separated in the cages. For example, Fe(acac)3 has a molecular diameter of ca. 9.7 Å, larger than the pore size (3.4 Å) but lower than the cavity diameter (11.6 Å) of ZIF-8. When ZIF-8 is mixed with the Fe(acac)3 molecules, the Fe(acac)3 molecules can be encapsulated by the ZIF-8 cages. After the pyrolysis of the confined Fe(acac)3, ZIF-8 is converted to N-C. At the same time, Fe(acac)3 is reduced by the generated N-C, leading to the formation of Fe SACs on the N-C [104]. Replacement of Fe(acac)3 with Ru3(CO)12 produces isolated Ru3 clusters embedded on N-C by the same synthesis strategy [153]. In 2018, Cheng et al. reported a novel strategy to construct W SACs on N-C via using MOFs as the precursor [150]. It can be noticed that the uncoordinated amine groups in the UiO-66-NH2 are crucial for avoiding the aggregation of W species. Oppositely, the W atoms tend to aggregate into nanoclusters or even large nanoparticles without the dangling ‒NH2 groups. The obtained W SACs exhibited good HER activity under alkaline conditions.
    This synthesis approach has been extended for the preparation of other SACs (e.g., Ru SACs) with tailored catalytic reaction properties [154]. Therefore, the recent progress indicates that MOFs have several advantages as templates of SACs. First, different kinds of metal ions are bridged via different organic precursors, ensuring the formation of various functional SACs by pyrolysis MOFs. Second, organic linkers derived heteroatom-doped carbon by pyrolysis can be anchored on SACs [82].
2.4 SiO2 Template-Assisted Pyrolysis Method
    The use of SiO2 as a template is another method for the synthesis of SACs, and was recently reported by Li’s group. Briefly, as schematically illustrated in Fig. 4a, a SiO2 template is first fabricated and dissolved in a Co-TIPP/TIPP solution before introducing another precursor. Next, thermally treated the obtained powder under the H2/Ar. Finally, the Co SACs can be collected after removing the SiO2 template by HF (or NaOH) solutions. AC-HAADF-STEM along with EELS further demonstrates that the formation of Co SACs and the C, N, Co atoms are uniformly distributed (Fig. 4b-d) [108]. Using a similar approach, Mo, Cu, Pt, and Pd SACs have been also fabricated by the same group with SiO2, chitosan, and metal salts as precursors. Especially, the structure of the Mo SACs catalyst was probed by AC-HAADF-STEM and XAFS which indicated the formation of Mo-SACs anchored to two carbon atom and one nitrogen atom (Mo1N1C2) [155]. As shown in Fig. 5a-e, the Co SACs with five Co-N coordination number embedded in polymer-derived hollow N-C spheres (Co-N5/HNPCSs) has been also prepared by this method [150]. However, the SiO2 template-assisted pyrolysis method would not be a preferred technique in the industry due to the dangerous nature of HF as a dissolution reagent.

Fig. 4 a The synthetic process of ISAS-Co/HNCS. b TEM and c AC-HAADF-STEM images of ISAS-Co/HNCS. d HAADF-STEM image and corresponding EDX element mapping of ISAS-Co/HNCS. e ORR polarization curves.

Fig. 4 a The synthetic process of ISAS-Co/HNCS. b TEM and c AC-HAADF-STEM images of ISAS-Co/HNCS. d HAADF-STEM image and corresponding EDX element mapping of ISAS-Co/HNCS. e ORR polarization curves.

Fig. 5 a Schematic illustration, b TEM, c HAADF-STEM image of Co-N5/HNPCSs. d AC-HAADF-STEM and magnified images of Co-N5/HNPCSs. e LSV curves.

Fig. 5 a Schematic illustration, b TEM, c HAADF-STEM image of Co-N5/HNPCSs. d AC-HAADF-STEM and magnified images of Co-N5/HNPCSs. e LSV curves.

2.5 Electrodeposition Approach
    Various metal ions can be reduced through the electrochemical cathodic reduction method. The deposition rate of metal ions on the substrate can be adjusted via a change in ion concentration, and then a slow metal ion diffusion rate enables the deposition of SACs on support materials. It is confirmed that Pt atoms can be dissolved from Pt anodes under both alkaline and acid solutions at high voltages and then redeposited onto cathodes [156]. Based on this phenomenon, Pt foil was utilized as a metal source for depositing Pt SACs supported on CoP nanotube arrays by Luo’s group. The obtained Pt SACs supported on CoP nanotube arrays can be directly served as HER electrocatalyst, which exhibited activities comparable to commercial Pt/C in neutral solutions (pH = 7.2) [53]. Similarly, Pt SACs on the single-wall CNTs can be also obtained by a simple electroplating deposition method [93]. In addition, Xue et al. found that Ni and Fe SACs can be obtained by an electrodeposition method. In their work, they declared that Ni SACs (1.23 Å) and Fe SACs (1.02 Å) were obtained and these SACs exhibited high HER performance with close to 0 mV onset overpotential, low Tafel slopes and large turnover frequencies [157]. As illustrated in the experiments, the electrodeposition method for SACs has several advantages: First, the particle size can be well adjusted by changing the deposition parameters such as plating time. Second, the SACs are usually deposited onto the outside surface of the substrate, which is beneficial for the exposure of the active sites. Third, the electrochemical deposition method is fast, scalable, controllable, and efficient [34, 82]. However, there are also disadvantages for this electrodeposition process, such as non-uniform plating (electroplating that results in a substandard appearance of the plated material).
2.6 High-Temperature Atom Trapping from Bulk Particles
    In the high-temperature atom trapping process, a thermal transport from bulk nanoparticles to the SACs is realized by a simple model system. This approach not only requires the mobile metal species, but also demands a support material that can capture the mobile metal species. As illustrated in Fig. 6a, under high temperatures and oxidizing conditions, Pt atoms can be emitted to PtO2 molecules [158]. When PtO2 molecules bind to the surfaces of another material that stabilizes the metal-containing precursors, then uniformly dispersed metal SACs can be obtained. Indeed, Datye’s group described the preparation of Pt SACs supported on CeO2 by thermal diffusion of Pt nanoparticles [158]. Recently, Li’s group reported that precious metal (Au, Pd and Pt) nanoparticles can be converted to thermally stable noble metal single atoms (Au, Pd, and Pt SACs) by utilizing ZIF-8 derived N-C as the anchoring substrate to capture the migrating noble metal atoms at 900 ℃ (Fig. 6b) [159]. Interestingly, this phenomenon is existed in non-precious metal system as well. For example, Ni nanoparticles supported on the defective N-C can be converted to surface enriched Ni SACs. The authors declared that the Ni nanoparticles play a part of ‘‘Pac-Man’’ to bite off surface C-C bonds. Meanwhile, when Ni nanoparticles diffuse on the N-C matrix, the metal Ni atoms bound to the N-rich defect sites (Fig. 6c). Therefore, Ni nanoparticles are slowly weared and finally converted to Ni SACs [158].

Fig. 6 a Schematic illustration of Pt nanoparticle to Pt SACs. b Schematic illustration of Pd nanoparticle to Pd SACs and structural characterizations of Pd SACs. c Scheme of Ni NPs to Ni SACs transformation and structural characterizations. d Schematic of the synthesis of Cu-SACs/N-C.

Fig. 6 a Schematic illustration of Pt nanoparticle to Pt SACs. b Schematic illustration of Pd nanoparticle to Pd SACs and structural characterizations of Pd SACs. c Scheme of Ni NPs to Ni SACs transformation and structural characterizations. d Schematic of the synthesis of Cu-SACs/N-C.

    Furthermore, in order to find a feasible strategy for producing functional SACs at industrial levels, Qu et al. described a facile gas-migration method to directly convert bulk metal materials to SACs. The schematic is shown in Fig. 6d. First, ZIF-8 and commercial Cu foam are placed separately in a porcelain boat. Second, ZIF-8 is subjected to a pyrolysis process at 900 ℃ under Ar atmosphere, forming pyrolyzed ZIF-8 with empty Zn nodes and a large number of defect sites. Subsequently, under NH3 atmosphere, NH3 molecules haul the metal Cu atoms from the surface of Cu foam to form volatile Cu(NH3)x species. If such Cu(NH3)x species bind to the defects rich N-C support, then Cu SACs can be uniformly dispersed on the surface of the N-C support [161]. These high-temperature atom trapping methods provide valuable guidance for the direct preparation of SACs from non-precious bulk metals (Cu, Ni, and Co), and show great potential for scaling up SACs towards industrial applications. Additionally, using bulk noble metal (Pt net, Au plate, and Pd plate) as a precursor, Pt SACs, Au SACs and Pd SACs can be also trapped by the defective graphene. Along with them, the as-obtained Pt SACs/DG shows high activity for the HER [162].
2.7 Vacancies/defects Immobilized Strategy
    SACs trapped by defect sites in various substrates (2D materials and transition metal compounds) form a unique class of single-atom catalysts. For example, Wang’s group reported the electrochemical exfoliation Mo2TiAlC2 MXene with Pt plate as the counter electrode, in which the Mo vacancies can use as the anchoring sites for Pt SACs (Mo2TiC2Tx–PtSA). During the electrochemical exfoliation process, single Pt atoms are simultaneously immobilized on the Mo vacancies and stabilized via the formation of covalent Pt–C bonds with the surrounding C atoms on the MXene. The resultant Mo2TiC2Tx–PtSA materials show Pt-like activity with only 30 mV overpotential at 10 mA cm−2 towards HER [163]. Similarly, Chen’s group reported a general and facile synthesis approach to fabricate a series of SACs by a simultaneous self-reduction-stabilization process under ambient conditions using 2D Ti-vacancy rich Ti3-xC2Ty MXene nanosheets as support. The series of precious and non-precious metal (M) single atoms (M = Pt, Ru, Rh, Ir, Pd, Fe, Co, and Ni) can be fabricated through the formation of M-C bonds [164]. Besides the defect-rich 2D MXene used as substrates to immobilize the SACs, other vacancies/defects-rich materials also have been used to stabilize SACs, such as vacancy-rich nickel hydroxide [165], oxygen vacancies-rich MoO2 [166], oxygen vacancies on ceria [167], etc.
2.8 Others Synthetic Approach
    In addition to the above mentioned synthetic strategy for SACs, many other methods have also been reported by different research groups, including hydrothermal method, iced photochemical reduction, photochemical reduction, and chemical reduction. In particular, Bao’s group demonstrated that Pt SACs supported on MoS2 can be obtained by a hydrothermal reduction method. Such materials exhibit an improved HER performance compared to the original MoS2. By combining DFT calculations, they declared that the improved HER performance comes from the tuned hydrogen adsorption free energy [92]. Wei et al. also reported a facile method to fabricate Pt SACs by photochemical reduction of frozen H2PtCl6 solution under ultraviolet light irradiation (Fig. 7a). The aggregation of Pt atoms can be avoided through ice-photochemical reduction and therefore Pt SACs are obtained successfully. Furthermore, the Pt SACs can be deposited on various kinds of substrates (such as ZnO nanowires, TiO2 nanoparticles, and carbon materials) [126]. Especially, the Pt SACs on mesoporous carbon showed excellent HER performance with an overpotential of 65 mV at 100 mA cm−2 and long-time durability against commercial Pt/C. More importantly, the iced-photochemical reduction method can be applied to synthesis Au (Fig. 7b) and Ag SACs (Fig. 7c). In addition, Zheng’s group prepared Pd SACs on ultrathin titanium oxide nanosheets with a high Pd loading (1.5 wt%) by a room-temperature photochemical reduction method (Fig. 7d-f) [84].

Fig. 7 a Schematic illustration of the iced-photochemical process. AC-HAADF-STEM images of b Ag SACs and c Au SACs. d-f Structural characterizations of Pd1/TiO2.

Fig. 7 a Schematic illustration of the iced-photochemical process. AC-HAADF-STEM images of b Ag SACs and c Au SACs. d-f Structural characterizations of Pd1/TiO2.

3 Characterization Technology

    In order to confirm the structures and compositions of SACs, a variety of atomic resolution characterization and analytical techniques have been employed, including AC-HAADF-STEM, XAFS spectroscopy (X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS)), Infrared (IR) spectroscopy and Nuclear magnetic resonance (NMR). In addition, DFT computations have brought unprecedented to discovering catalytic reaction mechanism and predicting the catalytically active species.
3.1 Electron Microscopy Techniques
    Figure 8a shows an optical photograph of the preparing process of the nitrogen-doped graphene supported atomic cobalt (denoted as Co-NG) catalyst. First, the GO and Co salt are dissolved in deionized water. Then the dried sample is obtained by lyophilization. Finally, the Co-NG sample is formed via annealing the dried precursor under the NH3 atmosphere. The Scanning electron microscopy (SEM) image of Co-NG displays that Co-NG has similar morphological features as graphene (Fig. 8b). Figure 8c further shows Co-NG nanosheets with ripple surface features. In addition, no cobalt nanoparticles can be found on the Co-NG materials. It is worth noting that the Co-NG material can be formed into a paper-like form (Fig. 8d). AC-HAADF-STEM imaging technique was applied to characterization the Co SACs. As shown in Fig. 8e-g, the AC-HAADF-STEM images clearly confirm that Co SACs dispersed on the defects-rich carbon matrix.

Fig. 8 a The synthetic procedure of the Co-NG material. b SEM, c TEM and d cross-section SEM image of Co-NG nanosheets. e Bright-field aberration-corrected STEM image of the Co-NG. f HAADF-STEM image of the Co-NG. g The enlarged view of the selected area in f.

Fig. 8 a The synthetic procedure of the Co-NG material. b SEM, c TEM and d cross-section SEM image of Co-NG nanosheets. e Bright-field aberration-corrected STEM image of the Co-NG. f HAADF-STEM image of the Co-NG. g The enlarged view of the selected area in f.

3.2 X-ray Spectroscopy
    XANES and EXAFS technologies are widely used for the characterization of the chemical state and the coordination structure of SACs [122]. For example, as presented in Fig. 9a, the Fe K-edge of XANES for FeN4/GN samples shows a near-edge structure different from those of Fe2O3 and Fe foil but similar to that of the iron precursor (FePc), confirming that the valence state of Fe for FeN4/GN samples remain the same as that of FePc. The Fourier Transform (FT) spectra (Fig. 9b) for FeN4/GN samples clearly show that the Fe atoms are atomically dispersed; Fe-Fe bonds are absent [169]. In addition, the atomic Co dopants on the support were also investigated by Pan et al. using XAFS measurements. As shown in Fig. 9c, the Co-K edge of XANES for Co−N5/HNPCSs shows a similar near-edge structure to that of CoPc. Furthermore, the FT k3-weighted EXAFS spectra (Fig. 9e) exhibit Co−N bonds with a peak at 1.5 Å, and Co−Co paths at 2.2 Å was not found. When further fitting EXAFS to the quantitative coordination configuration of Co atoms, the Co−N coordination number is five. All of these results demonstrated that the atomic dispersion of Co atoms is formed in Co−N5/HNPCSs material. It is worth noting that the Co atomic structure model is illustrated in Fig. 9f (the Co−N coordination number is five) [149].

Fig. 9 a Fe K-edge XANES and b FT EXAFS signals for FeN4/GN, FePc, Fe foil, and Fe2O3. XANES spectra at the Co K-edge of c Co3O4, Co foil, CoO, and Co-N5/HNPCSs, d Co-N5/HNPCSs-T (inset is the magnified image), e FT at R space, f schematic model, C (gray), N (blue), Co (wathet), and H (white).

Fig. 9 a Fe K-edge XANES and b FT EXAFS signals for FeN4/GN, FePc, Fe foil, and Fe2O3. XANES spectra at the Co K-edge of c Co3O4, Co foil, CoO, and Co-N5/HNPCSs, d Co-N5/HNPCSs-T (inset is the magnified image), e FT at R space, f schematic model, C (gray), N (blue), Co (wathet), and H (white).

3.3 Other Complementary Technologies
    In addition to AC-HAADF-STEM and XAFS spectroscopy, magic-angle spinning (MAS) NMR and IR are also useful characterization techniques towards SACs. Especially, solid-state MAS NMR technique is employed to study the anchoring of monoatomic Pt at very low loadings [170]. The coordination-unsaturated penta-coordinated Al3+ was confirmed as the anchoring point of Pt SACs on the surface of the γ-Al2O3 support. Corma et al. also exhibit the presence of Au SACs by the NMR technique [171]. IR spectroscopy can directly detect the interaction between the adsorbed molecule and the surface of the support. The characteristics of the active center can be inferred by appropriate correction by detecting the vibration frequency and intensity of the model. And then the condition of the overall catalyst can be analyzed, which is an important means for characterizing SACs [172, 173].
3.4 DFT Computations
    Besides the basic structure characterization, on the one hand, a theoretical study based on DFT has brought unprecedented to predicted catalytic activity through build the structure model, allowing the rational design of materials with tailored performance. For example, by using DFT, Zhou et al. investigated a number of SACs (Ni, Cu, Fe, Co, and Pd) embedded in nitrogen-doped graphenes as both OER and HER catalysts. They concluded that a high-coordinated Co center, e.g., a quadruple-coordinated Co, shows a good OER performance, whereas a low-coordinated Co site, e.g., a triple-coordinated Co is a good candidate for HER [174]. Likewise, Wang’s group presented a bifunctional single-atom catalyst by DFT simulation. To this end, β12-boron monolayer (β12-BM) supported Ni SACs exhibited the best full water splitting performance into the TM112-BM (TM = Fe, Ti, Co, V, Ni, and Mn) SACs systems [175]. In addition, Ling et al. demonstrated that Mo1-N1C2 possesses ultra-high NRR catalytic activity in a series of SACs of M1-N1C2 (M = Cu, Mo, Pd, and Pt) basis of first-principles computations [121]. On the other hand, understanding the catalytic reaction mechanism is crucial to the rational design of high activity catalysts. Therefore, DFT calculations also have been used to investigate the catalytic reaction mechanism. For example, the hydrogen adsorption free energy (ΔGH*) is an important descriptor of HER activity. Therefore, the values of ΔGH* can be used to compare the HER catalytic activity of different catalysts and generally the closer to zero, the better [149]. Furthermore, researchers can easily understand the local atomic structure and coordination atom information by constructed the DFT model.

4 Applications of SACs in Electrochemical HER

    As reported, SACs are attractive catalysts that can provide a unique opportunity to tune the catalytic reaction activity and selectivity. For example, Ru SACs have been used as efficient catalysts for HER, ORR, NRR, alcohols oxidation reaction (AOR) and CO2 hydrogenation, etc. (Figs. 10 and 11) [107, 128, 153, 176, 177]. Hydrogen, as a new ideal energy source, is significant to develop fuel cells. Herein, we highlight the recent development of SACs for electrochemical HER applications. HER is a half-reaction that takes place at the cathode during the water splitting. In fact, the HER reaction mechanism is different under acidic and alkaline conditions as represented in Eqs. 1-6:

Acidic media:
Volmer reaction: H+ + e- → H*                                      (1)
Heyrovsky reaction: H* + H+ + e- → H2                        (2)
Tafel reaction: H* + H* → H2                                        (3)
Alkaline media:
Volmer reaction: H2O + e-→ H* + OH-                           (4)
Heyrovsky reaction: H* + H2O + e- → H2 + OH-            (5)
Tafel reaction: 2H2O +2e- → H2+2OH-                            (6)

Fig. 10 a Preparation process of Ru SAs@PN. b Polarization curves of the samples. c The synthetic process for the Ru-N/G-750. d Polarization curves of Ru-N/G-750, Fe-N/G-750 and Pt/C in O2-saturated 0.1 M HClO4 solutions. e Scheme of the synthetic procedure for Ru SAs/N-C. f Current densities for NH3 production.

Fig. 10 a Preparation process of Ru SAs@PN. b Polarization curves of the samples. c The synthetic process for the Ru-N/G-750. d Polarization curves of Ru-N/G-750, Fe-N/G-750 and Pt/C in O2-saturated 0.1 M HClO4 solutions. e Scheme of the synthetic procedure for Ru SAs/N-C. f Current densities for NH3 production.

Fig. 11 a Illustration of the preparation process of Ru3/CN. b Conversion (%) of 2-aminobenzylalcohol versus time for Ru3/CN, Ru1/CN, Ru NPs/CN and commercial Ru/C. c Schematic illustration of the hydrogenation. d Ru K-edge FT-EXAFS spectra. e HAADF-STEM image of Ru/LDH. f Possible reaction pathway for CO2 hydrogenation to produce formic acid with a Ru/LDH catalyst.

Fig. 11 a Illustration of the preparation process of Ru3/CN. b Conversion (%) of 2-aminobenzylalcohol versus time for Ru3/CN, Ru1/CN, Ru NPs/CN and commercial Ru/C. c Schematic illustration of the hydrogenation. d Ru K-edge FT-EXAFS spectra. e HAADF-STEM image of Ru/LDH. f Possible reaction pathway for CO2 hydrogenation to produce formic acid with a Ru/LDH catalyst.

4.1 Pt Group SACs
    Generally, Pt group-based materials are the most active electrocatalysts for HER with large current densities, low overpotential, and good stability. However, they suffer from high cost and scarcity, which limit their extensive application. To solve these problems, many researchers have been carried out to develop low-loading of noble metal HER electrocatalysts. Interestingly, SACs are ideal methods to resolve such problems and are expected to display excellent activity towards HER. For example, Lou’s group reported Pt SACs in a nitrogen-containing porous carbon matrix (Pt@PCM) which can be obtained by a high-temperature atom trapping method (Fig. 12a, b). After HER tests, the Pt@PCM catalyst exhibits 25 times mass activity than that of commercial 20 wt% Pt/C catalyst (Fig. 12c,  d). Results of EXAFS investigation and DFT calculations suggested that the active centers are the lattice-confined Pt sites [178]. In addition, Pt SACs dispersed on graphdiyne (GDY) has also been synthesized by the coordination interactions between Pt atoms and alkynyl C atoms in GDY, with the formation of four-coordinated C2-Pt-Cl2 species (Pt-GDY2). Importantly, Pt-GDY2 shows excellent HER catalytic activity, with an enhanced mass activity in comparison with the 20 wt% commercial Pt/C catalysts (Fig. 12h) [179]. Cheng et al. obtained Pt SACs and clusters supported on the nitrogen-doped graphene nanosheet substrate by the ALD method, which also exhibited high HER activity [52]. Due to the low price of Ru which is 4% cheaper than Pt [107], Ru SACs supported on amorphous phosphorus nitride imide nanotubes (HPN) have also been synthesized by Wu and co-workers. The obtained Ru SACs supported HPN showed excellent catalytic activity and robust durability in acid solutions towards HER [126].

Fig. 12 a The synthetic process of Pt@PCM. b Element mapping images of Pt@PCM. Polarization curves of samples in c 0.5 M H2SO4 and d 1.0 M KOH solutions. e The formation of Pt-GDY1 and Pt-GDY2. f AC-HAADF–STEM images for PtGDY2. g Elemental mapping for Pt-GDY2. (h) The polarization curves for Pt-GDY2, Pt-GDY1, and c Pt/C in acidic solution.

Fig. 12 a The synthetic process of Pt@PCM. b Element mapping images of Pt@PCM. Polarization curves of samples in c 0.5 M H2SO4 and d 1.0 M KOH solutions. e The formation of Pt-GDY1 and Pt-GDY2. f AC-HAADF–STEM images for PtGDY2. g Elemental mapping for Pt-GDY2. (h) The polarization curves for Pt-GDY2, Pt-GDY1, and c Pt/C in acidic solution.

    Traditionally, transition metal phosphides (TMPs) and chalcogenides (TMCs) have been widely studied as HER electrocatalyst due to their excellent activity. Therefore, SACs supported on TMPs and TMCs are expected to show outstanding HER performance. Indeed, Luo’s group fabricated Pt SACs on CoP nanotube arrays (Pt SACs/CoP) through the electrodeposition method. The Pt SACs/CoP (Pt loading: 1.76 wt%) shows better HER activity than that of commercial 20 wt% Pt/C [53]. Deng et al. also prepared Pt SACs (Fig. 13a-c) uniformly dispersed on MoS2 (Pt–MoS2), showing significantly boosted HER activity compared with original MoS2 (Fig. 13d) [92]. In addition, Xing and co-workers fabricated different loading of single Pd atoms doped MoS2 (Fig. 13e, f). The 1% Pd–MoS2 shows the best HER catalytic activity with a low overpotential of 89 mV at a current density of 10 mA cm−2 (Fig. 13g) [180]. Guan et al. designed and prepared special ganoderma-like MoS2/NiS2 heterostructures with dispersed Pt atoms which showed impressive HER performance [181]. Despite such progress on the Pt group SACs, their large-scale commercialization is still hindered by their scarcity and high cost. Thus it is worthwhile to develop non-noble metal based SACs due to their relatively abundant and cheaper resource.

Fig. 13 a TEM and b HAADF-STEM images of Pt-MoS2. c Magnified domain with red dashed rectangle in b. d Polarization curves for bulk MoS2, FL-MoS2, Pt-MoS2, and 40% Pt/C. e Schematic illustration of the spontaneous MoS2/Pd (II) redox reaction. f Dark-field STEM image of the 1% Pd–MoS2. g Polarization curves of 1% Pd-MoS2/CP, 1% Pd-MoS2, pure MoS2, 1% Pd-C, and 20% Pt/C.

Fig. 13 a TEM and b HAADF-STEM images of Pt-MoS2. c Magnified domain with red dashed rectangle in b. d Polarization curves for bulk MoS2, FL-MoS2, Pt-MoS2, and 40% Pt/C. e Schematic illustration of the spontaneous MoS2/Pd (II) redox reaction. f Dark-field STEM image of the 1% Pd–MoS2. g Polarization curves of 1% Pd-MoS2/CP, 1% Pd-MoS2, pure MoS2, 1% Pd-C, and 20% Pt/C.

4.2 Fe, Co, Ni based SACs
    Tour’s group reported a low-cost, simple and scalable method to preparing Co SACs by simply heat-treating cobalt salts and graphene oxide under NH3 atmosphere for the first time. The Co-NG catalysts exhibit excellent HER activity under both acidic and alkaline conditions (Fig. 14a, b). They also suggested that the catalytically active centers originate from Co metal centers coordinated to the N atoms [95]. In addition, Fan et al. reported that a Ni-C-based material can be activated to obtain the Ni SACs on graphitic carbon after 4000 cyclic voltammograms cycles, consequently displaying high catalytic activity and durability for HER (Fig. 14c-f) [182]. Similarly, Chen’s group developed Ni SACs embedded in nanoporous graphene which also exhibited superior catalytic activities and stability in water-splitting reactions under acidic conditions [183]. Fe SACs have also been widely reported by different researchers, due to element Fe is one of the most abundant and cheapest transition metals [152, 157, 169, 184]. For example, recently, Xue et al. reported a facile and precise anchoring of the Fe SACs on graphdiyne (Fe/GD) by electrodeposition method using Fe3+ and graphdiyne as a precursor (Fig. 15a). Fe/GD exhibits high HER activity with only 66 mV overpotential at 10 mA cm–2 (Fig. 15d). Additionally, the atomic-level identification of the active structure during the alkaline HER has been reported recently. They demonstrated that the formation of a high-valence HO–Co1–N2 moiety by the binding between isolated Co1–N4 sites with electrolyte hydroxide, and further unravel the preferred water adsorption reaction intermediate H2O–(HO–Co1–N2). This result is critical to industrial water–alkali electrolyzers, which remains elusive and is a field of intense research [182].

Fig. 14 a The polarization curves of Co-G, NG, Co-NG and commercial Pt/C in acidic solutions. b Polarization curves for the Co-NG before and after 1,000 CV cycles in acidic and alkaline solutions, respectively. c The preparation and activation process of the Ni-C materials. d Polarization curves before and after activation at a constant potential. e CVs of HCl-Ni@C. f Polarization curves for A-Ni-C, HCl-Ni@C, and Pt/C catalysts.

Fig. 14 a The polarization curves of Co-G, NG, Co-NG and commercial Pt/C in acidic solutions. b Polarization curves for the Co-NG before and after 1,000 CV cycles in acidic and alkaline solutions, respectively. c The preparation and activation process of the Ni-C materials. d Polarization curves before and after activation at a constant potential. e CVs of HCl-Ni@C. f Polarization curves for A-Ni-C, HCl-Ni@C, and Pt/C catalysts.

Fig. 15 a Schematic illustration for the synthesis of Fe/GD and Ni/GD. AC-HAADF-STEM images of b Ni/GD and c Fe/GD. d Polarization curves of CC, Ni/GD, GDF, Fe/GD, and Pt/C. e The chemisorption energy of H for HER performance related to the free energy profile (ΔG).

Fig. 15 a Schematic illustration for the synthesis of Fe/GD and Ni/GD. AC-HAADF-STEM images of b Ni/GD and c Fe/GD. d Polarization curves of CC, Ni/GD, GDF, Fe/GD, and Pt/C. e The chemisorption energy of H for HER performance related to the free energy profile (ΔG).

4.3 Other Transition Metal-based SACs
    Traditionally, Mo and W based materials are also excellent catalysts for HER. Therefore, it is interesting to investigate the HER activity of Mo and W SACs. Indeed, Wang and co-workers demonstrated that W SACs with high HER performance can be obtained by the MOF-derived method (Fig. 16a, e). HAADF-STEM and XAFS spectroscopy analyses show the formation of W SACs anchored with three C atoms and one N atom (W1N1C3) (Fig. 16b-d). DFT calculations further demonstrated that the unique structure of the W1N1C3 moiety plays a critical role in improving HER activity [150]. Additionally, Mo SACs were obtained with the help of chitosan by the same group. Similarly, the structure of Mo SACs was probed by XAFS spectroscopy and AC-HAADF-STEM, suggesting the formation of Mo SACs anchored with two carbon atoms and one nitrogen atom (Mo1N1C2) (Fig. 16f-k). The Mo1N1C2 material displays outstanding HER performance compared with bulk MoN and Mo2C, and better durability than 20 wt% commercial Pt/C (Fig. 16l, m). DFT calculations further reveal that Mo1N1C2 is more beneficial for HER electrocatalysis than MoN and Mo2C (Fig. 16n, o) [156]. Recently, Du’s group demonstrated that V SACs supported on graphene is also a highly active HER electrocatalyst through DFT calculations [186]. It was suggested that V SACs embedded in the graphene can substantially tune the free energy of hydrogen adsorption (△GH*) to a more optimal value (△GH* = -0.01 eV), which is even better than the Pt material.

Fig. 16 a The formation process of W SACs. b TEM and c AC-HAADF-STEM images of the W SACs. d Atomic structure model of the W SACs. e Polarization curves for the W SACs. f TEM image of the Mo1N1C2, the insert is SAED pattern. g EDS maps for Mo1N1C2 material. h HRTEM and i AC-HAADF-STEM images of the Mo1N1C2. j Mo K-edge FT-EXAFS fitting curves of the Mo1N1C2. k Atomic structure model of the Mo1N1C2. l Polarization curves for the Mo1N1C2, MoN, Mo2C, and 20% Pt/C. m Polarization curves for the Mo1N1C2 before and after 1,000 CV cycles. n Gibbs free energy for H* adsorption for Mo2C, Mo1N1C2, and MoN. o The calculated DOS of the Mo1N1C2.

Fig. 16 a The formation process of W SACs. b TEM and c AC-HAADF-STEM images of the W SACs. d Atomic structure model of the W SACs. e Polarization curves for the W SACs. f TEM image of the Mo1N1C2, the insert is SAED pattern. g EDS maps for Mo1N1C2 material. h HRTEM and i AC-HAADF-STEM images of the Mo1N1C2. j Mo K-edge FT-EXAFS fitting curves of the Mo1N1C2. k Atomic structure model of the Mo1N1C2. l Polarization curves for the Mo1N1C2, MoN, Mo2C, and 20% Pt/C. m Polarization curves for the Mo1N1C2 before and after 1,000 CV cycles. n Gibbs free energy for H* adsorption for Mo2C, Mo1N1C2, and MoN. o The calculated DOS of the Mo1N1C2.

    It is worth noting that within the last few years there has been a fast growth in the study fields of SACs. All kinds of noble and non-noble SACs have been fabricated and used as a high activity HER electrocatalysts. And Table 2 lists a detailed comparison of their electrochemical HER performances.

Table 2 Summary of the HER activity of SACs in acid/neutral/alkaline solutions

12 21 table2

5 Summary and Outlook

    Single-atom catalysts (SACs), with maximum atom-utilization efficiency, exhibit many advantageous particularly for HER application with high activity and stability. In recent years, intensive researches have been carried out in this field. In this review, all the important SACs synthetic strategies reported so far, including the wet-chemistry method, atomic layer deposition (ALD), metal-organic framework (MOF)-derived method, electrodeposition, high-temperature atom trapping from bulk particles, and vacancies/defects immobilized strategy, have been included and discussed in detail. In addition, to reveal the structures and compositions of SACs, various advanced characterization techniques, such as aberration-corrected high angle annular dark-field scanning transmission electron microscopy (AC-corrected HAADF-STEM), X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) techniques as well as density functional theory (DFT) simulation have also been summarized and discussed. Finally, various metal-based (especially Pt, Pd, Ru, Fe, Co, Ni, Mo, W) SACs in electrocatalytic HER have been systematically reviewed. Despite these significant achievements in the past few years in SACs for electrochemical HER field, there are still challenges in this fascinating field that remain to be resolved:
    (1) As it is known, SACs need to be dispersed on support to avoid prevent them from aggregation and at the same time to increase their utilization efficiency during the catalytic reactions. Therefore, supports play an important role in SACs synthesis and their catalytic processes. To this end, more efforts should be devoted to finding new, more conductive and robust support materials.
    (2) At present, only Pt, Pd, Ru, Fe, Co, Ni, Mo, W SACs have been investigated in the HER catalytic field. Based on experimental evidence, V, Nb, Ta, Mn, Rh, Ir, Ag, Au, and Cu, etc. metal compounds have also been reported to be potential electrocatalysts for HER. Therefore, research efforts should be extended to more metal SACs for HER.
   (3) To investigate the active centers and understand the catalytic reaction mechanism, advanced in-situ and ex-situ characterization techniques are highly desirable, and beneficial for the rational design and observation of high-performance SACs.
    (4) Although DFT simulation is a useful tool in disclosing the catalytic reaction mechanism and predicting the catalytically active species. However, accurate assessment of the catalytic centers resulting from SACs electrocatalysts still needs further in-depth study.
    (5) Until now, the electrocatalytic behavior of SACs is still ambiguous. Consequently, DFT simulations in combination with XAFS fitting and the experimental data have brought unprecedented insight into the real mechanism.
    (6) Although most of SACs exhibit Pt-like or even better than Pt activity towards HER, it should be pointed out that the durability problem is another huge challenge for SACs towards practical application, especially, in industrial polymer electrolyte membrane (PEM) electrolyzers always need catalysts to maintain high activity and stability over 50,000 h.
    Overall, the future directions of SACs development for HER can be focused on developing new and more efficient SACs and their supporting materials, discovering the HER catalytic reaction mechanisms at the molecular scale by a combination of experimental result and DFT calculations, and exploring new SACs for HER and their structural analysis.

Acknowledgements

    This work was financially supported by the Natural Sciences and Engineering Research Council of Canada (NSERC), Institut National de la Recherche Scientifique (INRS) and the National Natural Science Foundation of China (516722040).

 

References

[1] B. Dunn, H. Kamath, J.-M. Tarascon, Electrical energy storage for the grid: a battery of choices. Science 334(6058), 928–935 (2011). https://doi.org/10.1126/science.1212741
[2] M. Armand, J.M. Tarascon, Building better batteries. Nature 451(7179), 652–657 (2008). https://doi.org/10.1038/451652a
[3] J.A. Turner, Sustainable hydrogen production. Science 305(5686), 972–974 (2004). https://doi.org/10.1126/science.1103197
[4] A.S. Arico, P. Bruce, B. Scrosati, J.M. Tarascon, W. Van Schalkwijk, Nanostructured materials for advanced energy conversion and storage devices. Nat. Mater. 4, 366–377 (2005). https://doi.org/10.1142/9789814317665_0022
[5] P.G. Bruce, S.A. Freunberger, L.J. Hardwick, J.M. Tarascon, Li–O2 and Li–S batteries with high energy storage. Nat. Mater. 11(1), 19–29 (2012). https://doi.org/10.1038/nmat3191
[6] L. Liao, Q. Zhang, Z. Su, Z. Zhao, Y. Wang et al., Efficient solar water-splitting using a nanocrystalline CoO photocatalyst. Nat. Nanotechn. 9(1), 69–73 (2013). https://doi.org/10.1038/nnano.2013.272
[7] Y. Fu, Q. Wei, G. Zhang, S. Sun. Batteries: advanced phosphorus-based materials for lithium/sodium-ion batteries: recent developments and future perspectives. Adv. Energy Mater. 8(13), 1702849 (2018). https://doi.org/10.1002/aenm.201702849
[8] D.A. Rand, R.M. Dell, Hydrogen Energy: Challenges and Prospects (RSC Publishing, Cambridge, 2007).
[9] S. Dunn, Hydrogen futures: toward a sustainable energy system. Int. J. Hydrogen Energy 27(3), 235–264 (2002). https://doi.org/10.1016/S0360-3199(01)00131-8
[10] J. Turner, G. Sverdrup, M.K. Mann, P.C. Maness, B. Kroposki, M. Ghirardi, R.J. Evans, D. Blake, Renewable hydrogen production. Int. J. Energy Res. 32(5), 379–407 (2008). https://doi.org/10.1002/er.1372
[11] Z. Pu, I.S. Amiinu, Z. Kou, W. Li, S. Mu. RuP2-based catalysts with platinum-like activity and higher durability for the hydrogen evolution reaction at all pH values. Angew. Chem. Int. Ed. 56(38), 11559–11564 (2017). https://doi.org/10.1002/anie.201704911
[12] J. Wang, W. Cui, Q. Liu, Z. Xing, A.M. Asiri, X. Sun, Recent progress in cobalt-based heterogeneous catalysts for electrochemical water splitting. Adv. Mater. 28(2), 215–230 (2016). https://doi.org/10.1002/adma.201502696
[13] L. Feng, G. Yu, Y. Wu, G. Li, H. Li et al., High-index faceted Ni3S2 nanosheet arrays as highly active and ultrastable electrocatalysts for water splitting. J. Am. Chem. Soc. 137(44), 14023–14026 (2015). https://doi.org/10.1021/jacs.5b08186
[14] X. Zou, Y. Zhang, Noble metal-free hydrogen evolution catalysts for water splitting. Chem. Soc. Rev. 44(15), 5148–5180 (2015). https://doi.org/10.1039/C4CS00448E
[15] Y. Yan, B. Yu Xia, B. Zhao, X. Wang, A review on noble-metal-free bifunctional heterogeneous catalysts for overall electrochemical water splitting. J. Mater. Chem. A 4(45), 17587–17603 (2016). https://doi.org/10.1039/C6TA08075H
[16] S. Anantharaj, S.R. Ede, K. Sakthikumar, K. Karthick, S. Mishra, S. Kundu, Recent trends and perspectives in electrochemical water splitting with an emphasis on sulfide, selenide, and phosphide catalysts of Fe, Co, and Ni: a review. ACS Catal. 6(12), 8069–8097 (2016). https://doi.org/10.1021/acscatal.6b02479
[17] M.G. Walter, E.L. Warren, J.R. McKone, S.W. Boettcher, Q. Mi, E.A. Santori, N.S. Lewis, Solar water splitting cells. Chem. Rev. 110(11), 6446–6473 (2010). https://doi.org/10.1021/cr1002326
[18] A.J. Bard, M.A. Fox, Artificial photosynthesis: solar splitting of water to hydrogen and oxygen. Acc Chem. Res. 28(3), 141–145 (1995). https://doi.org/10.1021/ar00051a007
[19] M.S. Faber, S. Jin, Earth-abundant inorganic electrocatalysts and their nanostructures for energy conversion applications. Energy Environ. Sci. 7(11), 3519–3542 (2014). https://doi.org/10.1039/C4EE01760A
[20] C. Tang, N. Cheng, Z. Pu, W. Xing, X. Sun, NiSe nanowire film supported on nickel foam: an efficient and stable 3D bifunctional electrode for full water splitting. Angew. Chem. Int. Ed. 54(32), 9483–9487 (2015). https://doi.org/10.1002/anie.201503407
[21] Q. Luo, M. Peng, X. Sun, Y. Luo, A.M.Asiri, Efficient electrochemical water splitting catalyzed by electrodeposited NiFe nanosheets film. Int. J. Hydrogen Energy 41(21), 8785–8792 (2016). https://doi.org/10.1016/j.ijhydene.2016.04.007
[22] L. Stern, L. Feng, F. Song, X. Hu, Ni2P as a Janus catalyst for water splitting: the oxygen evolution activity of Ni2P nanoparticles. Energy Environ. Sci. 8, 2347–2351 (2015). https://doi.org/10.1039/C5EE01155H
[23] Z. Pu, Y. Luo, A.M. Asiri, X. Sun, Efficient electrochemical water splitting catalyzed by electrodeposited nickel diselenide nanoparticles based film. ACS Appl. Mater. Interfaces 8(7), 4718–4723 (2016). https://doi.org/10.1021/acsami.5b12143
[24] J. Zhang, T. Wang, D. Pohl, B. Rellinghaus, R. Dong, S. Liu, X. Zhuang, X. Feng, Interface engineering of MoS2/Ni3S2 heterostructures for highly enhanced electrochemical overall-water-splitting activity. Angew. Chem. Int. Ed. 55(23), 6814–6819 (2016). https://doi.org/10.1002/anie.201602237
[25] J. Zhang, L. Dai, Nitrogen, phosphorus, and fluorine tri-doped graphene as a multifunctional catalyst for self-powered electrochemical water splitting. Angew. Chem. Int. Ed. 55(42), 13296–13300 (2016). https://doi.org/10.1002/anie.201607405
[26] T. Reier, Z. Pawolek, S. Cherevko, M. Bruns, T. Jones et al., Molecular insight in structure and activity of highly efficient, low-Ir Ir–Ni oxide catalysts for electrochemical water splitting (OER). J. Am. Chem. Soc. 137(40), 13031–13040 (2015). https://doi.org/10.1021/jacs.5b07788
[27] Y. Tan, H. Wang, P. Liu, Y. Shen, C. Cheng et al., Versatile nanoporous bimetallic phosphides towards electrochemical water splitting. Energy Environ. Sci. 7, 2257–2261 (2016). https://doi.org/10.1039/C6EE01109H
[28] J. Masa, P. Weide, D. Peeters, I. Sinev, W. Xia et al., Amorphous cobalt boride (Co2B) as a highly efficient nonprecious catalyst for electrochemical water splitting: oxygen and hydrogen evolution. Adv. Energy Mater. 6(6), 1502313 (2016). https://doi.org/10.1002/aenm.201502313
[29] Y. Shi, B. Zhang, Recent advances in transition metal phosphide nanomaterials: synthesis and applications in hydrogen evolution reaction. Chem. Soc. Rev. 45(6), 1529–1541 (2016). https://doi.org/10.1039/C5CS00434A
[30] Y. Zheng, Y. Jiao, M. Jaroniec, S. Qiao, Advancing the electrochemistry of the hydrogen-evolution reaction through combining experiment and theory. Angew. Chem. Int. Ed. 54(1), 52–65 (2015). https://doi.org/10.1002/anie.201407031
[31] E.J. Popczun, J.R. McKone, C.G. Read, A.J. Biacchi, A.M. Wiltrout, N.S. Lewis, R.E. Schaak, Nanostructured nickel phosphide as an electrocatalyst for the hydrogen evolution reaction. J. Am. Chem. Soc. 135(25), 9267–9270 (2013). https://doi.org/10.1021/ja403440e
[32] Y. Li, H. Wang, L. Xie, Y. Liang, G. Hong, H. Dai, MoS2 nanoparticles grown on graphene: an advanced catalyst for the hydrogen evolution reaction. J. Am. Chem. Soc. 133(19), 7296–7299 (2011). https://doi.org/10.1021/ja201269b
[33] C. Tang, L. Gan, R. Zhang, W. Lu, X. Jiang, A.M. Asiri, X. Sun, J. Wang, L. Chen, Ternary FexCo1–xP nanowire array as a robust hydrogen evolution reaction electrocatalyst with Pt-like activity: experimental and theoretical insight. Nano Lett. 16(10), 6617–6621 (2016). https://doi.org/10.1021/acs.nanolett.6b03332
[34] Z. Pu, Q. Liu, P. Jiang, A.M. Asiri, A.Y. Obaid, X. Sun, CoP nanosheet arrays supported on a Ti plate: an efficient cathode for electrochemical hydrogen evolution. Chem. Mater. 26(15), 4326–4329 (2014). https://doi.org/10.1021/cm501273s
[35] Y. Zheng, Y. Jiao, Y. Zhu, L. Li, Y. Han et al., Hydrogen evolution by a metal-free electrocatalyst. Nat. Commun. 5, 3783 (2014). https://doi.org/10.1038/ncomms4783
[36] D. Kong, J.J. Cha, H. Wang, H.R. Lee, Y. Cui, First-row transition metal dichalcogenide catalysts for hydrogen evolution reaction. Energy Environ. Sci. 6(12), 3553–3558 (2013). https://doi.org/10.1039/C3EE42413H
[37] J. Kibsgaard, T.F. Jaramillo, Molybdenum phosphosulfide: an active, acid-stable, earth-abundant catalyst for the hydrogen evolution reaction. Angew. Chem. Int. Ed. 53(52), 14433–14437 (2014). https://doi.org/10.1002/anie.201408222
[38] I. Bhugun, D. Lexa, J.M. Savéant, Homogeneous catalysis of electrochemical hydrogen evolution by iron(0) porphyrins. J. Am. Chem. Soc. 118(16), 3982–3983 (1996). https://doi.org/10.1021/ja954326x
[39] D. Kong, H. Wang, Z. Lu, Y. Cui, CoSe2 nanoparticles grown on carbon fiber paper: an efficient and stable electrocatalyst for hydrogen evolution reaction. J. Am. Chem. Soc. 136(13), 4897–4900 (2014). https://doi.org/10.1021/ja501497n
[40] J.R. McKone, B.F. Sadtler, C.A. Werlang, N.S. Lewis, H.B. Gray, Ni–Mo nanopowders for efficient electrochemical hydrogen evolution. ACS Catal. 3(2), 166–169 (2013). https://doi.org/10.1021/cs300691m
[41] R. Subbaraman, D. Tripkovic, D. Strmcnik, K.C. Chang, M. Uchimura, A.P. Paulikas, V. Stamenkovic, N.M. Markovic, Enhancing hydrogen evolution activity in water splitting by tailoring Li+-Ni(OH)2-Pt interfaces. Science 334(6060), 1256–1260 (2011). https://doi.org/10.1126/science.1211934
[42] T. Chao, X. Luo, W. Chen, B. Jiang, J. Ge, Y. Lin, G. Wu, X. Wang, Y. Hu, Z. Zhuang, Y. Wu, X. Hong, Y. Li, Atomically dispersed copper-platinum dual sites alloyed with palladium nanorings catalyze the hydrogen evolution reaction. Angew. Chem. Int. Ed. 56(50), 16263–16267 (2017). https://doi.org/10.1002/anie.201709803
[43] S. Sarkar, S.C. Peter, An overview on Pd-based electrocatalysts for the hydrogen evolution reaction. Inorg. Chem. Front. 5(9), 2060–2080 (2018). https://doi.org/10.1039/C8QI00042E
[44] G. Xu, J. Hui, T. Huang, Y. Chen, J.M. Lee, Platinum nanocuboids supported on reduced graphene oxide as efficient electrocatalyst for the hydrogen evolution reaction. J. Power Sources 285, 393–399 (2015). https://doi.org/10.1016/j.jpowsour.2015.03.131
[45] Y. Mi, L. Wen, Z. Wang, D. Cao, H. Zhao, Y. Zhou, F. Grote, Y. Leia. Ultra-low mass loading of platinum nanoparticles on bacterial cellulose derived carbon nanofibers for efficient hydrogen evolution. Catal. Today 262, 141–145 (2016). https://doi.org/10.1016/j.cattod.2015.08.019
[46] C. Tang, D. Wang, Z. Wu, B. Duan, Tungsten carbide hollow microspheres as electrocatalyst and platinum support for hydrogen evolution reaction. Int. J. Hydrogen Energy 40(8), 3229–3237 (2015). https://doi.org/10.1016/j.ijhydene.2014.12.105
[47] H. Yin, S. Zhao, K. Zha, A. Muqsit, H. Tang et al., Ultrathin platinum nanowires grown on single-layered nickel hydroxide with high hydrogen evolution activity. Nat. Commun. 6, 6430 (2015). https://doi.org/10.1038/ncomms7430
[48] Z. Xing, C. Han, D. Wang Q. Li, X. Yang, Ultrafine Pt nanoparticle-decorated Co(OH)2 nanosheet arrays with enhanced catalytic activity toward hydrogen evolution. ACS Catal. 7(10), 7131−7135 (2017). https://doi.org/10.1021/acscatal.7b01994
[49] R. Huang, Z. Sun, S. Chen, S. Wu, Z. Shen, X. Wu, J. Zeng, Pt-Cu hierarchical quasi great dodecahedrons with abundant twinning defects for hydrogen evolution. Chem. Commun. 53(51), 6922–6925 (2017). https://doi.org/10.1039/C7CC03643D
[50] Y. Shen, A.C. Lua, J. Xi, X. Qiu, Ternary platinum-copper-nickel nanoparticles anchored to hierarchical carbon supports as free-standing hydrogen evolution electrodes. ACS Appl. Mater. Interfaces 8(5), 3464–3472 (2016). https://doi.org/10.1021/acsami.5b11966
[51] P. Wang, X. Zhang, J. Zhang, S. Wan, S. Guo, G. Lu, J. Yao, X. Huang, Precise tuning in platinum-nickel/nickel sulfide interface nanowires for synergistic hydrogen evolution catalysis. Nat. Commun. 8, 14580 (2017). https://doi.org/10.1038/ncomms14580
[52] N. Cheng, S. Stambula, D. Wang, M.N. Banis, J. Liu et al., Platinum single-atom and cluster catalysis of the hydrogen evolution reaction. Nat. Commun. 7, 13638 (2016). https://doi.org/10.1038/ncomms13638
[53] L. Zhang, L. Han, H. Liu, X. Liu, J. Luo, Potential-cycling synthesis of single platinum atoms for efficient hydrogen evolution in neutral media. Angew. Chem. Int. Ed. 56(44), 13694–13698 (2017). https://doi.org/10.1002/anie.201706921
[54] Y. Lee, J. Suntivich, K.J. May, E.E. Perry, Y. Shao-Horn, Synthesis and activities of rutile IrO2 and RuO2 nanoparticles for oxygen evolution in acid and alkaline solutions. J. Phys. Chem. Lett. 3(3), 399–404 (2012). https://doi.org/10.1021/jz2016507
[55] J. Zhang, L. Qu, G. Shi, J. Liu, J. Chen, L. Dai, N,P-codoped carbon networks as efficient metal-free bifunctional catalysts for oxygen reduction and hydrogen evolution reactions. Angew. Chem. Int. Ed. 55(6), 2230–2234 (2016). https://doi.org/10.1002/anie.201510495
[56] L. He, Y. Huang, A. Wang, X. Wang, X. Chen, J.J. Delgado, T. Zhang, A noble-metal-free catalyst derived from Ni-Al hydrotalcite for hydrogen generation from N2H4·H2O decomposition. Angew. Chem. Int. Ed. 51(25), 6191–6194 (2012). https://doi.org/10.1002/anie.201201737
[57] E.J. Popczun, C.G. Read, C.W. Roske, N.S. Lewis, R.E. Schaak, Highly active electrocatalysis of the hydrogen evolution reaction by cobalt phosphide nanoparticles. Angew. Chem. Int. Ed. 53(21), 5427–5430 (2014). https://doi.org/10.1002/anie.201402646
[58] J. Tian, Q. Liu, A.M. Asiri, X. Sun, Self-supported nanoporous cobalt phosphide nanowire arrays: an efficient 3D hydrogen-evolving cathode over the wide range of pH 0-14. J. Am. Chem. Soc. 136(21), 7587–7590 (2014). https://doi.org/10.1021/ja503372r
[59] W. Cui, N. Cheng, Q. Liu, C. Ge, A.M. Asiri, X. Sun, Mo2C nanoparticles decorated graphitic carbon sheets: biopolymer-derived solid-state synthesis and application as an efficient electrocatalyst for hydrogen generation. ACS Catal. 4(8), 2658–2661 (2014). https://doi.org/10.1021/cs5005294
[60] Y. Xu, M. Gao, Y. Zheng, J. Jiang, S. Yu, Nickel/Nickel(II) oxide nanoparticles anchored onto cobalt(IV) diselenide nanobelts for the electrochemical production of hydrogen. Angew. Chem. Int. Ed. 52(33), 8546–8550 (2013). https://doi.org/10.1002/anie.201303495
[61] X. Wang, K. Maeda, A. Thomas, K. Takanabe, G. Xin, J.M. Carlsson, K. Domen, M. Antonietti, A metal-free polymeric photocatalyst for hydrogen production from water under visible light. Nat. Mater. 8(1), 76–80 (2009). https://doi.org/10.1038/nmat2317
[62] A.L. Goff, V. Artero, B. Jousselme, P.D. Tran, N. Guillet et al., From hydrogenases to noble metal-free catalytic nanomaterials for H2 production and uptake. Science 326(5958), 1384–1387 (2009). https://doi.org/10.1126/science.1179773
[63] W. Chen, J.T. Muckerman, E. Fujita, Recent developments in transition metal carbides and nitrides as hydrogen evolution electrocatalysts. Chem. Commun. 49(79), 8896–8909 (2013). https://doi.org/10.1039/C3CC44076A
[64] Q. Liu, J. Tian, W. Cui, N. Cheng, A.M. Asiri, X. Sun, Carbon nanotubes decorated with CoP nanocrystals: a highly active non-noble-metal nanohybrid electrocatalyst for hydrogen evolution. Angew. Chem. Int. Ed. 53(26), 6710–6714 (2014). https://doi.org/10.1002/anie.201404161
[65] P. Jiang, Q. Liu, Y. Liang, J. Tian, A.M. Asiri, X. Sun, A cost-effective 3D hydrogen evolution cathode with high catalytic activity: FeP nanowire array as the active phase. Angew. Chem. Int. Ed. 53(47), 12855–12859 (2014). https://doi.org/10.1002/anie.201406848
[66] C.G. Morales-Guio, X. Hu, Amorphous molybdenum sulfides as hydrogen evolution catalysts. Acc. Chem. Res. 47(8), 2671–2681 (2014). https://doi.org/10.1021/ar5002022
[67] B. Cao, G.M. Veith, J.C. Neuefeind, R.R. Adzic, P.G. Khalifah, Mixed close-packed cobalt molybdenum nitrides as non-noble metal electrocatalysts for the hydrogen evolution reaction. J. Am. Chem. Soc. 135(51), 19186–19192 (2013). https://doi.org/10.1021/ja4081056
[68] Y. Zhao, F. Zhao, X. Wang, C. Xu, Z. Zhang, G. Shi, L. Qu, Graphitic carbon nitride nanoribbons: graphene-assisted formation and synergic function for highly efficient hydrogen evolution. Angew. Chem. Int. Ed. 53(50), 13934–13939 (2014). https://doi.org/10.1002/anie.201409080
[69] I.S. Amiinu, Z. Pu, X. Liu, K.A. Owusu, H.G. Monestel, F.O. Boakye, H. Zhang, S. Mu, Multifunctional Mo–N/C@MoS2 electrocatalysts for HER, OER, ORR, and Zn–air batteries. Adv. Funct. Mater. 27(44), 1702300 (2017). https://doi.org/10.1002/adfm.201702300
[70] R. Adhikari, K. Basu, Y. Zhou, F. Vetrone, D. Ma et al., Heterostructured quantum dot architectures for efficient and stable photoelectrochemical hydrogen production. J. Mater. Chem. A 6(16), 6822–6829 (2018). https://doi.org/10.1039/C7TA11378A
[71] X.Y. Yu, Y. Feng, Y. Jeon, B.Y. Guan, X.W. Lou, U. Paik, Formation of Ni-Co-MoS2 nanoboxes with enhanced electrocatalytic activity for hydrogen evolution. Adv. Mater. 28(40), 9006– 9011 (2016). https://doi.org/10.1002/adma.201601188
[72] F.X. Ma, H.B. Wu, B.Y. Xia, C.Y. Xu, X.W. Lou, Hierarchical β-Mo2C nanotubes organized by ultrathin nanosheets as a highly efficient electrocatalyst for hydrogen production. Angew. Chem. Int. Ed. 54(51), 15395–5399 (2015). https://doi.org/10.1002/anie.201508715
[73] L. Liu, A. Corma, Metal catalysts for heterogeneous catalysis: from single atoms to nanoclusters and nanoparticles. Chem. Rev. 118(10), 4981–5079 (2018). https://doi.org/10.1021/acs.chemrev.7b00776
[74] S.X. Liang, C. Hao, Y.T. Shi, The power of single-atom catalysis. ChemCatChem 7(17), 2559–2567 (2015). https://doi.org/10.1002/cctc.201500363
[75] J. Kim, H.E. Kim, H. Lee, Single-atom catalysts of precious metals for electrochemical reactions. ChemSusChem 11(1), 104–113 (2018). https://doi.org/10.1002/cssc.201701306
[76] X.F. Yang, A. Wang, B. Qiao, J. Li, J. Liu, T. Zhang, Single-atom catalysts: a new frontier in heterogeneous catalysis. Acc. Chem. Res. 46(8), 1740–1748 (2013). https://doi.org/10.1021/ar300361m
[77] B.T. Qiao, A.Q. Wang, X.F. Yang, L.F. Allard, Z. Jiang et al., Single-atom catalysis of CO oxidation using Pt1/FeOx. Nat. Chem. 3(8), 634–641 (2011). https://doi.org/10.1038/nchem.1095
[78] B. Bayatsarmadi, Y. Zheng, A. Vasileff, S.Z. Qiao, Recent advances in atomic metal doping of carbon-based nanomaterials for energy conversion. Small 13(21), 1700191 (2017). https://doi.org/10.1002/smll.201700191
[79] A. Wang, J. Li, T. Zhang, Heterogeneous single-atom catalysis. Nat. Rev. Chem. 2, 65–81 (2018). https://doi.org/10.1038/s41570-018-0010-1
[80] L.Q. Wang, L. Huang, F. Liang, S.M. Liu, Y.H. Wang, H.J. Zhang, Preparation, characterization and catalytic performance of single-atom catalysts. Chin. J. Catal. 38(9), 1528–1539 (2017). https://doi.org/10.1016/S1872-2067(17)62770-0
[81] C. Liu, Q. Li, C. Wu, J. Zhang, Y. Jin, D.R. MacFarlane, C. Sun, Single-boron catalysts for nitrogen reduction reaction. J. Am. Chem. Soc. 141(7), 2884-2888 (2019). https://doi.org/10.1021/jacs.8b13165
[82] J. Su, R. Ge, Y. Dong, F. Hao, L. Chen, Recent progress in single-atom electrocatalysts: concept, synthesis, and applications in clean energy conversion. J. Mater. Chem. A 6(29), 14025–14042 (2018). https://doi.org/10.1039/C8TA04064H
[83] A. Corma, P. Concepcion, M. Boronat, M.J. Sabater, J. Navas et al., Exceptional oxidation activity with size-controlled supported gold clusters of low atomicity. Nat. Chem. 5(9), 775–781 (2013). https://doi.org/10.1038/nchem.1721
[84] P. Liu, Y. Zhao, R. Qin, S. Mo, G. Chen et al., Photochemical route for synthesizing atomically dispersed palladium catalysts. Science 352(6287), 797–801 (2016). https://doi.org/10.1126/science.aaf5251
[85] R. Lang, T. Li, D. Matsumura, S. Miao, Y. Ren et al., Hydroformylation of olefins by a rhodium single-atom catalyst with activity comparable to RhCl(PPh3)3. Angew. Chem. Int. Ed. 55(52), 16054–16058 (2016). https://doi.org/10.1002/anie.201607885
[86] F. Chen, X. Jiang, L. Zhang, R. Lang, B. Qiao, Single-atom catalysis: bridging the homo-and heterogeneous catalysis. Chin. J. Catal. 39(5), 893–898 (2018). https://doi.org/10.1016/S1872-2067(18)63047-5
[87] J. Yang, D. He, W. Chen, W. Zhu, H. Zhang et al., Bimetallic Ru-Co clusters derived from a confined alloying process within zeolite-imidazolate frameworks for efficient NH3 decomposition and synthesis. ACS Appl. Mater. Interfaces 9(45), 39450−39455 (2017). https://doi.org/10.1021/acsami.7b14134
[88] S. Tian, Q. Fu, W. Chen, Q. Feng, Z. Chen et al., Carbon nitride supported Fe2 cluster catalysts with superior performance for alkene epoxidation. Nat. Commun. 9(1), 2353 (2018). https://doi.org/10.1038/s41467-018-04845-x [89] X. Dai, Z. Chen, T. Yao, L. Zheng, Y. Lin et al., Single Ni sites distributed on N-doped carbon for selective hydrogenation of acetylene. Chem. Commun. 53(84), 11568 (2017). https://doi.org/10.1039/C7CC04820C
[90] T. Chao, Y. Hu, X. Hong, Y. Li, Design of noble metal electrocatalysts on an atomic level. ChemElectroChem 6(2), 289−303 (2019). https://doi.org/10.1002/celc.201801189
[91] S.T. Hunt, M. Milina, Z. Wang, Y. Román-Leshkov, Activating earth-abundant electrocatalysts for efficient, low-cost hydrogen evolution/oxidation: sub-monolayer platinum coatings on titanium tungsten carbide nanoparticles. Energy Environ. Sci. 9(10), 3290–3301 (2016). https://doi.org/10.1039/C6EE01929C
[92] J. Deng, H.B. Li, J.P. Xiao, Y.C. Tu, D.H. Deng et al., Triggering the electrocatalytic hydrogen evolution activity of the inert two-dimensional MoS2 surface via single-atom metal doping. Energy Environ. Sci. 8(5), 1594–1601 (2015). https://doi.org/10.1039/C5EE00751H
[93] M. Tavakkoli, N. Holmberg, R. Kronberg, H. Jiang, J. Sainio, E. I. Kauppinen, T. Kallio, K. Laasonen, Electrochemical activation of single-walled carbon nanotubes with pseudo-atomic-scale platinum for the hydrogen evolution reaction. ACS Catal. 7(5), 3121–3130 (2017). https://doi.org/10.1021/acscatal.7b00199
[94] H. Fei, J. Dong, M.J. Arellano-Jimenez, G. Ye, N. Dong Kim, E.L. Samuel et al., Atomic cobalt on nitrogen-doped graphene for hydrogen generation. Nat. Commun. 6, 8668 (2015). https://doi.org/10.1038/ncomms9668
[95] X.J. Zeng, J.L. Shui, X.F. Liu, Q.T. Liu, Y.C. Li, J.X. Shang, L.R. Zheng, R.H. Yu, Single-atom to single-atom grafting of Pt1 onto Fe-N4 center: Pt1@Fe-N-C multifunctional electrocatalyst with significantly enhanced properties. Adv. Energy Mater. 8(1), 1701345 (2018). https://doi.org/10.1002/aenm.201701345
[96] Z. Geng, Y. Cao, W.Chen, X. Kong, Y. Liu, T. Yao, Y. Lin, Regulating the coordination environment of Co single atoms for achieving efficient electrocatalytic activity in CO2 reduction. Appl. Catal. B: Environ. 240, 234–240 (2019). https://doi.org/10.1016/j.apcatb.2018.08.075
[97] S. Dou, C. Dong. Z. Hu, Y. Huang, J. Chen et al., Atomic-scale CoOx species in metal-organic frameworks for oxygen evolution reaction. Adv. Funct. Mater. 27(36), 1702546 (2017). https://doi.org/10.1002/adfm.201702546
[98] M. Tavakkoli, N. Holmberg, R. Kronberg, H. Jiang, J. Sainio, E.I. Kauppinen, T. Kallio, K. Laasonen, Electrochemical activation of single-walled carbon nanotubes with pseudo-atomic-scale platinum for the hydrogen evolution reaction. ACS Catal. 7(5), 3121–3130 (2017). https://doi.org/10.1021/acscatal.7b00199
[99] L. Yang, L. Shi, D. Wang, Y. Lv, D. Cao, Single-atom cobalt electrocatalysts for foldable solid-state Zn-air battery. Nano Energy 50, 691–698 (2018). https://doi.org/10.1016/j.nanoen.2018.06.023
[100] H.L. Fei, J.C. Dong, Y.X. Feng, C.S. Allen, C.Z. Wan et al., General synthesis and definitive structural identification of MN4C4 single-atom catalysts with tunable electrocatalytic activities. Nat. Catal. 1(1), 63–72 (2018). https://doi.org/10.1038/s41929-017-0008-y
[101] P.Z. Chen, T.P. Zhou, L.L. Xing, K. Xu, Y. Tong et al., Atomically dispersed iron-nitrogen species as electrocatalysts for bifunctional oxygen evolution and reduction reactions. Angew. Chem. Int. Ed. 56(2), 610–614 (2017). https://doi.org/10.1002/anie.201610119
[102] Q. Niu, B.Chen, J. Guo, J. Nie, X. Guo, G. Ma, Flexible, porous, and metal–heteroatom-doped carbon nanofibers as efficient ORR electrocatalysts for Zn–Air battery. Nano-Micro Lett. 11, 8 (2019). https://doi.org/10.1007/s40820-019-0238-4
[103] P. Yin, T. Yao, Y. Wu, L. R. Zheng, Y. Lin et al., Single cobalt atoms with precise N-coordination as superior oxygen reduction reaction catalysts. Angew. Chem. Int. Ed. 55(36), 10800–10805 (2016). https://doi.org/10.1002/anie.201604802
[104] Y.J. Chen, S.F. Ji, Y.Y. Wang, J.C. Dong, W.X. Chen et al., Isolated single iron atoms anchored on N-doped porous carbon as an efficient electrocatalyst for the oxygen reduction reaction. Angew. Chem. Int. Ed. 56(24), 6937–6941 (2017). https://doi.org/10.1002/anie.201702473
[105] C. Zhao, X. Dai, T. Yao, W. Chen, X. Wang et al., Ionic exchange of metal-organic frameworks to access single nickel sites for efficient electroreduction of CO2. J. Am. Chem. Soc. 139(24), 8078–8081 (2017). https://doi.org/10.1021/jacs.7b02736
[106] B. Wang, X. Wang, J. Zou, Y. Yan, S. Xie, G. Hu, Y. Li, A. Dong, Simple-cubic carbon frameworks with atomically dispersed iron dopants toward high-efficiency oxygen reduction. Nano Lett. 17(3), 2003–2009 (2017). https://doi.org/10.1021/acs.nanolett.7b00004
[107] C. Zhang, J. Sha, H. Fei, Mi. Liu, S. Yazdi et al., Single-atomic ruthenium catalytic sites on nitrogen-doped graphene for oxygen reduction reaction in acidic medium. ACS Nano 11(7), 6930–6941 (2017). https://doi.org/10.1021/acsnano.7b02148
[108] Y. Han, Y. Wang, W. Chen, R. Xu, L. Zheng et al., Hollow N-doped carbon spheres with isolated cobalt single atomic sites: superior electrocatalysts for oxygen reduction. J. Am. Chem. Soc. 139(48), 17269–17272 (2017). https://doi.org/10.1021/jacs.7b10194
[109] Z. Zhang, X. Gao, M. Dou, J. Ji, F. Wang, Biomass derived N-doped porous carbon supported single Fe atoms as superior electrocatalysts for oxygen reduction. Small 13(22), 1604290 (2017). https://doi.org/10.1002/smll.201604290
[110] C.W. Lee, K.D. Yang, D.H. Nam, J.H. Jang, N.H. Cho, S.W. Im, K.T. Nam, Defining a materials database for the design of copper binary alloy catalysts for electrochemical CO2 conversion. Adv. Mater. 30(42), 1704717 (2018). https://doi.org/10.1002/adma.201704717
[111] M. Zhang, Q. Dai, H. Zheng, M. Chen, L. Dai, Novel MOF-derived Co@N-C bifunctional catalysts for highly efficient Zn-air batteries and water splitting. Adv. Mater. 30(10), 1705431 (2018). https://doi.org/10.1002/adma.201705431
[112] Y. Wang, J. Liu, Y. Wang, A.M. Al-Enizi, G. Zheng, Tuning of CO2 reduction selectivity on metal electrocatalysts. Small 13(43), 1701809 (2017). https://doi.org/10.1002/smll.201701809
[113] P. Song, M. Luo, X. Liu, W. Xing, W. Xu, Z. Jiang, L. Gu, Zn single atom catalyst for highly efficient oxygen reduction reaction. Adv. Funct. Mater. 27(28), 1700802 (2017). https://doi.org/10.1002/adfm.201700802
[114] Y.X. Duan, F.L. Meng, K.H. Liu, S.S. Yi, S.J. Li, J.M. Yan, Q. Jiang, Amorphizing of Cu nanoparticles toward highly efficient and robust electrocatalyst for CO2 reduction to liquid fuels with high faradaic efficiencies. Adv. Mater. 30(14), 1706194 (2018). https://doi.org/10.1002/adma.201706194
[115] A. Vasileff, Y. Zheng, S.Z. Qiao, Carbon solving carbon's problems: recent progress of nanostructured carbon-based catalysts for the electrochemical reduction of CO2. Adv. Energy Mater. 7(21), 1700759 (2017). https://doi.org/10.1002/aenm.201700759
[116] W. Ju, A. Bagger, G.P. Hao, A.S. Varela, I. Sinev et al., Understanding activity and selectivity of metal-nitrogen-doped carbon catalysts for electrochemical reduction of CO2. Nat. Commun. 8(1), 944 (2017). https://doi.org/10.1038/s41467-017-01035-z
[117] Y. Cao, Y. Gao, H. Zhou, X. Chen, H. Hu et al., Highly efficient ammonia synthesis electrocatalyst: single Ru atom on naturally nanoporous carbon materials. Adv. Theory Simul. 1(5), 1800018 (2018). https://doi.org/10.1002/adts.201800018
[118] J. Zhao, Z. Chen, Single Mo atom supported on defective boron nitride monolayer as an efficient electrocatalyst for nitrogen fixation: a computational study. J. Am. Chem. Soc. 139(36), 12480–12487 (2017). https://doi.org/10.1021/jacs.7b05213
[119] C. Ling, X. Bai, Y. Ouyang, A. Du, J. Wang, Single molybdenum atom anchored on N-doped carbon as a promising electrocatalyst for nitrogen reduction into ammonia at ambient conditions. J. Phys. Chem. C 122(29), 16842–16847 (2018). https://doi.org/10.1021/acs.jpcc.8b05257
[120] H. Zhang, G. Liu, L. Shi, J. Ye, Single-atom catalysts: emerging multifunctional materials in heterogeneous catalysis. Adv. Energy Mater. 8(1), 1701343 (2018). https://doi.org/10.1002/aenm.201701343
[121] V. Vij, S. Sultan, A.M. Harzandi, A. Meena, J.N. Tiwari, W.-G. Lee, T. Yoon, K.S. Kim, Nickel-based electrocatalysts for energy-related applications: oxygen reduction, oxygen evolution, and hydrogen evolution reactions. ACS Catal. 7(10), 7196–7225 (2017). https://doi.org/10.1021/acscatal.7b01800
[122] X. Li, W. Bi, M. Chen, Y. Sun, H. Ju et al., Exclusive Ni-N4 sites realize near-unity CO selectivity for electrochemical CO2 reduction. J. Am. Chem. Soc. 139(42), 14889–14892 (2017). https://doi.org/10.1021/jacs.7b09074
[123] D.J. Harding, C. Kerpal, G. Meijer, A. Fielicke, Activated methane on small cationic platinum clusters. Angew. Chem. Int. Ed. 51(3), 817–819 (2012). https://doi.org/10.1002/anie.201107042
[124] J. Lin, A. Wang, B. Qiao, X. Liu, X. Yang et al., Remarkable performance of Ir1/FeOx single-atom catalyst in water gas shift reaction. J. Am. Chem. Soc. 135(41), 15314–15317 (2013). https://doi.org/10.1021/ja408574m
[125] Y. Chen, S. Ji, C. Chen, Q. Peng, D. Wang, Y. Li, Single-atom catalysts: synthetic strategies and electrochemical applications. Joule 2(7), 1242–1264 (2018). https://doi.org/10.1016/j.joule.2018.06.019
[126] H. Wei, K. Huang, D. Wang, R. Zhang, B. Ge et al., Iced photochemical reduction to synthesize atomically dispersed metals by suppressing nanocrystal growth. Nat. Commun. 8(1), 1490 (2017). https://doi.org/10.1038/s41467-017-01521-4
[127] M. Tavakkoli, N. Holmberg, R. Kronberg, H. Jiang, J. Sainio, E.I. Kauppinen, T. Kallio, K. Laasonen, Electrochemical activation of single-walled carbon nanotubes with pseudo-atomic-scale platinum for the hydrogen evolution reaction. ACS Catal. 7(5), 3121−3130 (2017). https://doi.org/10.1021/acscatal.7b00199
[128] J. Yang, B. Chen, X. Liu, W. Liu, Z. Li et al., Efficient and robust hydrogen evolution: phosphorus nitride imide nanotubes as supports for anchoring single ruthenium sites. Angew. Chem. Int. Ed. 57(30), 9495–9500 (2018). https://doi.org/10.1002/anie.201804854
[129] Y. Qu, L. Wang, Z. Li, P. Li, Q. Zhang et al., Ambient synthesis of single-atom catalysts from bulk metal via trapping of atoms by surface dangling bonds. Adv. Mater. 31(44) 1904496, (2019). https://doi.org/10.1002/adma.201904496
[130] B. Han, R. Lang, B. Qiao, A. Wang, T. Zhang, Highlights of the major progress in single-atom catalysis in 2015 and 2016. Chin. J. Catal. 38(9), 1498–1507 (2017). https://doi.org/10.1016/S1872-2067(17)62872-9
[131] H. Wei, X. Liu, A. Wang, L. Zhang, B. Qiao et al., FeOx-supported platinum single-atom and pseudo-single-atom catalysts for chemoselective hydrogenation of functionalized nitroarenes. Nat. Commun. 5(1), 5634 (2014). https://doi.org/10.1038/ncomms6634
[132] M. Moses-DeBusk, M. Yoon, L.F. Allard, D.R. Mullins, Z. Wu et al., CO oxidation on supported single Pt atoms: experimental and ab initio density functional studies of CO interaction with Pt atom on θ-Al2O3(010) surface. J. Am. Chem. Soc. 135(34) 12634–12645 (2013). https://doi.org/10.1021/ja401847c
[133] T.K. Ghosh, N.N. Nair, Rh1/γ‐Al2O3 single-atom catalysis of O2 activation and CO oxidation: mechanism, effects of hydration, oxidation state, and cluster size. ChemCatChem 5(7), 1811–1821 (2013). https://doi.org/10.1002/cctc.201200799
[134] G. Spezzati, Y. Su, J.P. Hofmann, A.D. Benavidez, A.T. DeLaRiva, J. McCabe, A.K. Datye, E.J. M. Hensen, Atomically dispersed Pd-O species on CeO2(111) as highly active sites for low-temperature CO oxidation. ACS Catal. 7(10), 6887–6891 (2017). https://doi.org/10.1021/acscatal.7b02001
[135] J. Wan, W. Chen, C. Jia, L. Zheng, J. Dong et al., Defect effects on TiO2 nanosheets: stabilizing single atomic site Au and promoting catalytic properties. Adv. Mater. 30(11), 1705369 (2018). https://doi.org/10.1002/adma.201705369
[136] B. Qiao, J. Liu, Y.-G. Wang, Q. Lin, X. Liu et al., Highly efficient catalysis of preferential oxidation of CO in H2-rich stream by gold single-atom catalysts. ACS Catal. 5(11), 6249–6254 (2015). https://doi.org/10.1021/acscatal.5b01114
[137] B.J.O’Neill, D.H. Jackson, J. Lee, C. Canlas, P.C. Stair et al., Catalyst design with atomic layer deposition. ACS Catal. 5(3), 1804−1825 (2015). https://doi.org/10.1021/cs501862h
[138] V. Aleskovsky, M. Koltcov, USSR Patent USSR422446 (1972).
[139] S. Sun, G. Zhang, N. Gauquelin, N. Chen, J. Zhou et al., Single-atom catalysis using Pt/graphene achieved through atomic layer deposition. Sci. Rep. 3(5), 1775 (2013). https://doi.org/10.1038/srep01775
[140] H. Yan, H. Cheng, H. Yi, Y. Lin, T. Yao et al., Single-atom Pd1/graphene catalyst achieved by atomic layer deposition: remarkable performance in selective hydrogenation of 1,3-butadiene. J. Am. Chem. Soc. 137(33), 10484–10487 (2015). https://doi.org/10.1021/jacs.5b06485
[141] M.P. Hermida, Z. Lu, A. White, K.B. Low, T.P. Wu, J.W. Elam, Z.L. Wu, Y. Lei, Towards ALD thin film stabilized single-atom Pd1 catalysts. Nanoscale 8(33), 15348–15356 (2016). https://doi.org/10.1039/C6NR04403D
[142] L. Zhang, Z. Zhao, M. Norouzi Banis, L. Li, Y. Zhao et al., Selective atomic layer deposition of RuOx catalysts on shape-controlled Pd nanocrystals with significantly enhanced hydrogen evolution activity. J. Mater. Chem. A 6(47), 24397–24406 (2018). https://doi.org/10.1039/C8TA08931K
[143] S.J. Jeong, Y. Gu, J. Heo, J. Yang, C.S. Lee et al., Thickness scaling of atomic-layer-deposited HfO2 films and their application to wafer-scale graphene tunnelling transistors. Sci. Rep. 6(10), 20907 (2016). https://doi.org/10.1038/srep20907
[144] M. Leskela, M. Ritala, Atomic layer deposition chemistry: recent developments and future challenges. Angew. Chem. Int. Ed. 42(45), 5548–5554 (2003). https://doi.org/10.1002/anie.200301652
[145] H. Kim, J. Vac, Atomic layer deposition of metal and nitride thin films: current research efforts and applications for semiconductor device processing. Sci. Technol. B 21(6), 2231–2261 (2003). https://doi.org/10.1116/1.162267
[146] R.J. Kuppler, D.J. Timmons, Q. Fang, J. Li, T.A. Makal et al., Potential applications of metal-organic frameworks. Coord. Chem. Rev. 253(23-24), 3042–3066 (2009). https://doi.org/10.1016/j.ccr.2009.05.019
[147] H. Furukawa, K.E. Cordova, M. O'Keeffe, O.M. Yaghi, The chemistry and applications of metal-organic frameworks. Science 341(6149), 1230444 (2013). https://doi.org/10.1126/science.1230444
[148] A.J. Howarth, Y. Liu, P. Li, Z. Li, T.C. Wang, J.T. Hupp, O.K. Farha, Chemical, thermal and mechanical stabilities of metal-organic frameworks. Nat. Rev. Mater. 1, 15018 (2016). https://doi.org/10.1038/natrevmats.2015.18
[149] X. Wang, Z. Chen, X. Zhao, T. Yao, W. Chen et al., Regulation of coordination number over single Co sites: triggering the efficient electroreduction of CO2. Angew. Chem. Int. Ed. 57(7), 1944–1948 (2018). https://doi.org/10.1002/anie.201712451
[150] W. Chen, J. Pei, C. He, J. Wan, H. Ren et al., Single tungsten atoms supported on MOF-derived N-doped carbon for robust electrochemical hydrogen evolution. Adv. Mater. 30(30), 1800396 (2018). https://doi.org/10.1002/adma.201800396
[151] Y. Pan, R. Lin, Y. Chen, S. Liu, W. Zhu et al., Design of single-atom Co-N5 catalytic site: a robust electrocatalyst for CO2 reduction with nearly 100% CO selectivity and remarkable stability. J. Am. Chem. Soc. 140(12), 4218−4221 (2018). https://doi.org/10.1021/jacs.8b00814
[152] J. Wang, Z. Huang, W. Liu, C. Chang, H. Tang et al., Design of N-coordinated dual-metal sites: a stable and active Pt-free catalyst for acidic oxygen reduction reaction. J. Am. Chem. Soc. 139(48), 17281–17284 (2017). https://doi.org/10.1021/jacs.7b10385
[153] S. Ji, Y. Chen, Q. Fu, Y. Chen, J. Dong et al., Confined pyrolysis within metal-organic frameworks to form uniform Ru3 clusters for efficient oxidation of alcohols. J. Am. Chem. Soc. 139(29), 9795–9798 (2017). https://doi.org/10.1021/jacs.7b05018
[154] X. Wang, W. Chen, L. Zhang, T. Yao, W. Liu et al., Uncoordinated amine groups of metal-organic frameworks to anchor single Ru sites as chemoselective catalysts toward the hydrogenation of quinoline. J. Am. Chem. Soc. 139(28), 9419–9422 (2017). https://doi.org/10.1021/jacs.7b01686
[155] W. Chen, J. Pei, C. He, J. Wan, H. Ren et al., Rational design of single molybdenum atoms anchored on N-doped carbon for effective hydrogen evolution reaction. Angew. Chem. Int. Ed. 56(50), 16086–16090 (2017). https://doi.org/10.1002/anie.201710599
[156] G. Dong, M. Fang, H. Wang, S. Yip, H.-Y. Cheung et al., Insight into the electrochemical activation of carbon-based cathodes for hydrogen evolution reaction. J. Mater. Chem. A 3(24), 13080–13086 (2015). https://doi.org/10.1039/C5TA02551F
[157] Y. Xue, B. Huang, Y. Yi, Y. Guo, Z. Zuo et al., Anchoring zero valence single atoms of nickel and iron on graphdiyne for hydrogen evolution. Nat. Commun. 9(1), 1460 (2018). https://doi.org/10.1038/s41467-018-03896-4
[158] J. Jones, H. Xiong, A.T. DeLaRiva, E.J. Peterson, H. Pham et al., Thermally stable single-atom platinum-on-ceria catalysts via atom trapping. Science 353(6295), 150–154 (2016). https://doi.org/10.1126/science.aaf8800
[159] S. Wei, A. Li, J. Liu, Z. Li, W. Chen et al., Direct observation of noble metal nanoparticles transforming to thermally stable single atoms. Nat. Nanotechnol. 13(9), 856–861 (2018). https://doi.org/10.1038/s41565-018-0197-9
[160] J. Yang, Z. Qiu, C. Zhao, W. Wei, W. Chen et al., In situ thermal atomization to convert supported nickel nanoparticles into surface-bound nickel single-atom catalysts. Angew. Chem. Int. Ed. 57(43), 14095–14100 (2018). https://doi.org/10.1002/anie.201808049
[161] Y. Qu, Z. Li, W. Chen, Y. Lin, T. Yuan et al., Direct transformation of bulk copper into copper single sites via emitting and trapping of atoms. Nat. Catal. 1, 781–786 (2018). https://doi.org/10.1038/s41929-018-0146-x
[162] Y. Qu, B. Chen, Z. Li, X. Duan, L. Wang et al., Thermal emitting strategy to synthesize atomically dispersed Pt metal sites from bulk Pt metal. J. Am. Chem. Soc., 141(11), 4505-4509 (2019). https://doi.org/10.1021/jacs.8b09834
[163] J. Zhang, Y. Zhao, X. Guo, C. Chen, C. Dong et al., Single platinum atoms immobilized on an MXene as an efficient catalyst for the hydrogen evolution reaction. Nat. Catal. 1, 985–992 (2018). https://doi.org/10.1038/s41929-018-0195-1
[164] D. Zhao, Z. Chen, W. Yang, S. Liu, X. Zhang et al., MXene (Ti3C2) vacancy-confined single-atom catalyst for efficient functionalization of CO2. J. Am. Chem. Soc. 141(8), 4086-4093 (2019). https://doi.org/10.1021/jacs.8b13579
[165] J. Zhang, X. Wu, W.-C. Cheong, W. Chen, R. Lin et al., Cation vacancy stabilization of single-atomic-site Pt1/Ni(OH)x catalyst for diboration of alkynes and alkenes. Nat. Commun. 9(1), 1002 (2018). https://doi.org/10.1038/s41467-018-03380-z
[166] X. Li, J. Yu, J. Jia, A. Wang, L. Zhao, T. Xiong, H. Liu, W. Zhou, Confined distribution of platinum clusters on MoO2 hexagonal nanosheets with oxygen vacancies as a high-efficiency electrocatalyst for hydrogen evolution reaction. Nano Energy 62, 127–135 (2019). https://doi.org/10.1016/j.nanoen.2019.05.013
[167] Y. Wang, Z. Chen, P. Han, Y. Du, Z. Gu, X. Xu, G. Zheng, Single-atomic Cu with multiple oxygen vacancies on ceria for electrocatalytic CO2 reduction to CH4. ACS Catal. 8(8), 7113–7119 (2018). https://doi.org/10.1021/acscatal.8b01014
[168] P. Liu, Y. Zhao, R. Qin, S. Mo, G. Chen et al., Photochemical route for synthesizing atomically dispersed palladium catalysts. Science 352(6287), 797–800 (2016). https://doi.org/10.1126/science.aaf5251
[169] D. Deng, X. Chen, L. Yu, X. Wu, Q. Liu et al., A single iron site confined in a graphene matrix for the catalytic oxidation of benzene at room temperature. Sci Adv. 1(11), 1500462 (2015). https://doi.org/10.1126/sciadv.1500462
[170] J.H. Kwak, J. Hu, D. Mei, C.W. Yi, D.H. Kim, C. Peden, H.L. Allard, J. Szanyi, Coordinatively unsaturated Al3+ centers as binding sites for active catalyst phases of platinum on gamma-Al2O3. Science 325(5948), 1670−1673 (2009). https://doi.org/10.1126/science.1176745
[171] A. Corma, O.G. Salnikov, D.A. Barskiy, K.V. Kovtunov, I.V. Koptyug, Single-atom gold catalysis in the context of developments in parahydrogen-induced polarization. Chem. Eur. J. 21(19), 7012−7015 (2015). https://doi.org/10.1002/chem.201406664
[172] J. Ryczkowski, IR spectroscopy in catalysis. Catal. Today 68(4), 263−381 (2001). https://doi.org/10.1016/S0920-5861(01)00334-0 [173] C. Lamberti, A. Zecchina, E. Groppo, S. Bordiga, Probing the surfaces of heterogeneous catalysts by in situ IR spectroscopy. Chem. Soc. Rev. 39(12), 4951−5001 (2010). https://doi.org/10.1039/C0CS00117A
[174] Y. Zhou, G. Gao, Y. Li, W. Chu, L. Wang, Transition-metal single atoms in nitrogen-doped graphenes as efficient active centers for water splitting: a theoretical study. Phys. Chem. Chem. Phys. 21(6), 3024−3032 (2019). https://doi.org/10.1039/C8CP06755D
[175] C. Ling, L. Shi, Y. Ouyang, X. Zeng, J. Wang, Nanosheet supported single-metal atom bifunctional catalyst for overall water splitting. Nano Lett. 17(8), 5133−5139 (2017). https://doi.org/10.1021/acs.nanolett.7b02518
[176] Z. Geng, Y. Liu, X. Kong, P. Li, K. Li et al., Achieving a record-high yield rate of 120.9 μg NH3  mgcat.-1  h-1 for N2 electrochemical reduction over Ru single-atom catalysts. Adv. Mater. 30(40), 1803498 (2018). https://doi.org/10.1002/adma.201803498
[177] K. Mori, T. Taga, H. Yamashita, Isolated single-atomic Ru catalyst bound on a layered double hydroxide for hydrogenation of CO2 to formic acid. ACS Catal. 7(5), 3147−3151 (2017). https://doi.org/10.1021/acscatal.7b00312
[178] H. Zhang, P. An, W. Zhou, B.Y. Guan, P. Zhang, J. Dong, X.W. Lou, Dynamic traction of lattice-confined platinum atoms into mesoporous carbon matrix for hydrogen evolution reaction. Sci. Adv. 4(1), eaao6657 (2018). https://doi.org/10.1126/sciadv.aao6657
[179] X. Yin, H. Wang, S. Tang, X. Lu, M. Shu, R. Si, T. Lu, Engineering the coordination environment of single-atom platinum anchored on graphdiyne for optimizing electrocatalytic hydrogen evolution. Angew. Chem. Int. Ed. 57(30), 9382–9386 (2018). https://doi.org/10.1002/anie.201804817
[180] Z. Luo, Y. Ouyang, H. Zhang, M. Xiao, J. Ge et al., Chemically activating MoS2 via spontaneous atomic palladium interfacial doping towards efficient hydrogen evolution. Nat. Commun. 9(1), 2120 (2018). https://doi.org/10.1038/s41467-018-04501-4
[181] Y. Guan, Y. Feng, J. Wan, X. Yang, L. Fang et al., Ganoderma-like MoS2/NiS2 with single platinum atoms doping as an efficient and stable hydrogen evolution reaction catalyst. Small 14(27), 1800697 (2018). https://doi.org/10.1002/smll.201800697
[182] L. Fan, P. Liu, X. Yan, L. Gu, Z. Yang, H. Yang, S. Qiu, X. Yao, Atomically isolated nickel species anchored on graphitized carbon for efficient hydrogen evolution electrocatalysis. Nat. Commun. 7, 10667 (2016). https://doi.org/10.1038/ncomms10667
[183] H. Qiu, Y. Ito, W. Cong, Y. Tan, P. Liu et al., Nanoporous graphene with single-atom nickel dopants: an efficient and stable catalyst for electrochemical hydrogen production. Angew. Chem. Int. Ed. 54(47), 14031–14035 (2015). https://doi.org/10.1002/anie.201507381
[184] C. Zhang, S. Yang, J. Wu, M. Liu, S. Yazdi et al., Electrochemical CO2 reduction with atomic iron-dispersed on nitrogen-doped graphene. Adv. Energy Mater. 8(19),1703487 (2018). https://doi.org/10.1002/aenm.201703487
[185] L. Cao, Q. Luo, W. Liu, Y. Lin, X. Liu et al., Identification of single-atom active sites in carbon-based cobalt catalysts during electrocatalytic hydrogen evolution. Nat. Catal. 2,134–141 (2019). https://doi.org/10.1038/s41929-018-0203-5
[186] T. He, C. Zhang, A. Du, Single-atom supported on graphene grain boundary as an efficient electrocatalyst for hydrogen evolution reaction. Chem. Eng. Sci. 194, 58–63 (2019). https://doi.org/10.1016/j.ces.2018.03.028
[187] L. Zhang, Y. Jia, G. Gao, X. Yan, N. Chen et al., Graphene defects trap atomic Ni species for hydrogen and oxygen evolution reactions. Chem 4(2), 285–297 (2018). https://doi.org/10.1016/j.chempr.2017.12.005
[188] W. Liu, Q. Xu, P. Yan, J. Chen, Y. Du, S. Chu, J. Wang, Fabrication of a single-atom platinum catalyst for the hydrogen evolution reaction: A new protocol by utilization of HxMoO3−x with plasmon resonance. ChemCatChem 10(5), 946–950 (2018). https://doi.org/10.1002/cctc.201701777
[189] S. Ye, F. Luo, Q. Zhang, P. Zhang, T. Xu et al., Highly stable single Pt atomic sites anchored on aniline-stacked graphene for hydrogen evolution reaction. Energy Environ. Sci. 12(3), 1000–1007 (2019). https://doi.org/10.1039/C8EE02888E
[190] M. Li, K. Duanmu, C. Wan, T. Cheng, L. Zhang et al., Single-atom tailoring of platinum nanocatalysts for high-performance multifunctional electrocatalysis. Nat. Catal. 2, 495–503 (2019). https://doi.org/10.1038/s41929-019-0279-6
[191] H. Wei, H. Wu, K. Huang, B. Ge, J. Ma et al., Ultralow-temperature photochemical synthesis of atomically dispersed Pt catalysts for the hydrogen evolution reaction. Chem. Sci. 10(9), 2830–2836 (2019). https://doi.org/10.1039/C8SC04986F
[192] K. Jiang, B. Liu, M. Luo, S. Ning, M. Peng et al., Single platinum atoms embedded in nanoporous cobalt selenide as electrocatalyst for accelerating hydrogen evolution reaction. Nat.Commun. 10, 1743 (2019) https://doi.org/10.1038/s41467-019-09765-y
[193] T. Chao, X. Luo, W. Chen, B. Jiang, J. Ge et al., Atomically dispersed copper-platinum dual sites alloyed with palladium nanorings catalyze the hydrogen evolution reaction. Angew. Chem. Int. Ed. 56(50), 16047–16051 (2017). https://doi.org/10.1002/anie.201709803
[194] S.Yuan, Z. Pu, Hu. Zhou, J. Yu, I.S. Amiinu et al., A universal synthesis strategy for single atom dispersed cobalt/metal clusters heterostructure boosting hydrogen evolution catalysis at all pH values. Nano Energy 59, 472–480 (2019). https://doi.org/10.1016/j.nanoen.2019.02.062
[195] D. Wang, Q. Li, C. Han, Z. Xing, X. Yang, Single-atom ruthenium based catalyst for enhanced hydrogen evolution. Appl. Catal. B: Environ. 249, 91–97 (2019). https://doi.org/10.1016/j.apcatb.2019.02.059
[196] L. Zhang, R. Si, H. Liu, N. Chen, Q. Wang et al., Atomic layer deposited Pt-Ru dual-metal dimers and identifying their active sites for hydrogen evolution reaction. Nat. Commun. 10, 4936 (2019). https://doi.org/10.1038/s41467-019-12887-y
[197] Y. Zhao, T. Ling, S. Chen, B. Jin, A. Vasileff et al., Non-metal single-iodine-atom electrocatalysts for the hydrogen evolution reaction. Angew. Chem. Int. Ed. 58(35), 12252–12257 (2019). https://doi.org/10.1002/anie.201905554
[198] J. Yi, R. Xu, G. Chai, T. Zhang, K. Zang et al., Cobalt single-atoms anchored on porphyrinic triazine-based frameworks as bifunctional electrocatalysts for oxygen reduction and hydrogen evolution reactions. J. Mater. Chem. A 7, 1252-1259 (2019). https://doi.org/10.1039/C8TA09490J

References

[1] B. Dunn, H. Kamath, J.-M. Tarascon, Electrical energy storage for the grid: a battery of choices. Science 334(6058), 928–935 (2011). https://doi.org/10.1126/science.1212741
[2] M. Armand, J.M. Tarascon, Building better batteries. Nature 451(7179), 652–657 (2008). https://doi.org/10.1038/451652a
[3] J.A. Turner, Sustainable hydrogen production. Science 305(5686), 972–974 (2004). https://doi.org/10.1126/science.1103197
[4] A.S. Arico, P. Bruce, B. Scrosati, J.M. Tarascon, W. Van Schalkwijk, Nanostructured materials for advanced energy conversion and storage devices. Nat. Mater. 4, 366–377 (2005). https://doi.org/10.1142/9789814317665_0022
[5] P.G. Bruce, S.A. Freunberger, L.J. Hardwick, J.M. Tarascon, Li–O2 and Li–S batteries with high energy storage. Nat. Mater. 11(1), 19–29 (2012). https://doi.org/10.1038/nmat3191
[6] L. Liao, Q. Zhang, Z. Su, Z. Zhao, Y. Wang et al., Efficient solar water-splitting using a nanocrystalline CoO photocatalyst. Nat. Nanotechn. 9(1), 69–73 (2013). https://doi.org/10.1038/nnano.2013.272
[7] Y. Fu, Q. Wei, G. Zhang, S. Sun. Batteries: advanced phosphorus-based materials for lithium/sodium-ion batteries: recent developments and future perspectives. Adv. Energy Mater. 8(13), 1702849 (2018). https://doi.org/10.1002/aenm.201702849
[8] D.A. Rand, R.M. Dell, Hydrogen Energy: Challenges and Prospects (RSC Publishing, Cambridge, 2007).
[9] S. Dunn, Hydrogen futures: toward a sustainable energy system. Int. J. Hydrogen Energy 27(3), 235–264 (2002). https://doi.org/10.1016/S0360-3199(01)00131-8
[10] J. Turner, G. Sverdrup, M.K. Mann, P.C. Maness, B. Kroposki, M. Ghirardi, R.J. Evans, D. Blake, Renewable hydrogen production. Int. J. Energy Res. 32(5), 379–407 (2008). https://doi.org/10.1002/er.1372
[11] Z. Pu, I.S. Amiinu, Z. Kou, W. Li, S. Mu. RuP2-based catalysts with platinum-like activity and higher durability for the hydrogen evolution reaction at all pH values. Angew. Chem. Int. Ed. 56(38), 11559–11564 (2017). https://doi.org/10.1002/anie.201704911
[12] J. Wang, W. Cui, Q. Liu, Z. Xing, A.M. Asiri, X. Sun, Recent progress in cobalt-based heterogeneous catalysts for electrochemical water splitting. Adv. Mater. 28(2), 215–230 (2016). https://doi.org/10.1002/adma.201502696
[13] L. Feng, G. Yu, Y. Wu, G. Li, H. Li et al., High-index faceted Ni3S2 nanosheet arrays as highly active and ultrastable electrocatalysts for water splitting. J. Am. Chem. Soc. 137(44), 14023–14026 (2015). https://doi.org/10.1021/jacs.5b08186
[14] X. Zou, Y. Zhang, Noble metal-free hydrogen evolution catalysts for water splitting. Chem. Soc. Rev. 44(15), 5148–5180 (2015). https://doi.org/10.1039/C4CS00448E
[15] Y. Yan, B. Yu Xia, B. Zhao, X. Wang, A review on noble-metal-free bifunctional heterogeneous catalysts for overall electrochemical water splitting. J. Mater. Chem. A 4(45), 17587–17603 (2016). https://doi.org/10.1039/C6TA08075H
[16] S. Anantharaj, S.R. Ede, K. Sakthikumar, K. Karthick, S. Mishra, S. Kundu, Recent trends and perspectives in electrochemical water splitting with an emphasis on sulfide, selenide, and phosphide catalysts of Fe, Co, and Ni: a review. ACS Catal. 6(12), 8069–8097 (2016). https://doi.org/10.1021/acscatal.6b02479
[17] M.G. Walter, E.L. Warren, J.R. McKone, S.W. Boettcher, Q. Mi, E.A. Santori, N.S. Lewis, Solar water splitting cells. Chem. Rev. 110(11), 6446–6473 (2010). https://doi.org/10.1021/cr1002326
[18] A.J. Bard, M.A. Fox, Artificial photosynthesis: solar splitting of water to hydrogen and oxygen. Acc Chem. Res. 28(3), 141–145 (1995). https://doi.org/10.1021/ar00051a007
[19] M.S. Faber, S. Jin, Earth-abundant inorganic electrocatalysts and their nanostructures for energy conversion applications. Energy Environ. Sci. 7(11), 3519–3542 (2014). https://doi.org/10.1039/C4EE01760A
[20] C. Tang, N. Cheng, Z. Pu, W. Xing, X. Sun, NiSe nanowire film supported on nickel foam: an efficient and stable 3D bifunctional electrode for full water splitting. Angew. Chem. Int. Ed. 54(32), 9483–9487 (2015). https://doi.org/10.1002/anie.201503407
[21] Q. Luo, M. Peng, X. Sun, Y. Luo, A.M.Asiri, Efficient electrochemical water splitting catalyzed by electrodeposited NiFe nanosheets film. Int. J. Hydrogen Energy 41(21), 8785–8792 (2016). https://doi.org/10.1016/j.ijhydene.2016.04.007
[22] L. Stern, L. Feng, F. Song, X. Hu, Ni2P as a Janus catalyst for water splitting: the oxygen evolution activity of Ni2P nanoparticles. Energy Environ. Sci. 8, 2347–2351 (2015). https://doi.org/10.1039/C5EE01155H
[23] Z. Pu, Y. Luo, A.M. Asiri, X. Sun, Efficient electrochemical water splitting catalyzed by electrodeposited nickel diselenide nanoparticles based film. ACS Appl. Mater. Interfaces 8(7), 4718–4723 (2016). https://doi.org/10.1021/acsami.5b12143
[24] J. Zhang, T. Wang, D. Pohl, B. Rellinghaus, R. Dong, S. Liu, X. Zhuang, X. Feng, Interface engineering of MoS2/Ni3S2 heterostructures for highly enhanced electrochemical overall-water-splitting activity. Angew. Chem. Int. Ed. 55(23), 6814–6819 (2016). https://doi.org/10.1002/anie.201602237
[25] J. Zhang, L. Dai, Nitrogen, phosphorus, and fluorine tri-doped graphene as a multifunctional catalyst for self-powered electrochemical water splitting. Angew. Chem. Int. Ed. 55(42), 13296–13300 (2016). https://doi.org/10.1002/anie.201607405
[26] T. Reier, Z. Pawolek, S. Cherevko, M. Bruns, T. Jones et al., Molecular insight in structure and activity of highly efficient, low-Ir Ir–Ni oxide catalysts for electrochemical water splitting (OER). J. Am. Chem. Soc. 137(40), 13031–13040 (2015). https://doi.org/10.1021/jacs.5b07788
[27] Y. Tan, H. Wang, P. Liu, Y. Shen, C. Cheng et al., Versatile nanoporous bimetallic phosphides towards electrochemical water splitting. Energy Environ. Sci. 7, 2257–2261 (2016). https://doi.org/10.1039/C6EE01109H
[28] J. Masa, P. Weide, D. Peeters, I. Sinev, W. Xia et al., Amorphous cobalt boride (Co2B) as a highly efficient nonprecious catalyst for electrochemical water splitting: oxygen and hydrogen evolution. Adv. Energy Mater. 6(6), 1502313 (2016). https://doi.org/10.1002/aenm.201502313
[29] Y. Shi, B. Zhang, Recent advances in transition metal phosphide nanomaterials: synthesis and applications in hydrogen evolution reaction. Chem. Soc. Rev. 45(6), 1529–1541 (2016). https://doi.org/10.1039/C5CS00434A
[30] Y. Zheng, Y. Jiao, M. Jaroniec, S. Qiao, Advancing the electrochemistry of the hydrogen-evolution reaction through combining experiment and theory. Angew. Chem. Int. Ed. 54(1), 52–65 (2015). https://doi.org/10.1002/anie.201407031
[31] E.J. Popczun, J.R. McKone, C.G. Read, A.J. Biacchi, A.M. Wiltrout, N.S. Lewis, R.E. Schaak, Nanostructured nickel phosphide as an electrocatalyst for the hydrogen evolution reaction. J. Am. Chem. Soc. 135(25), 9267–9270 (2013). https://doi.org/10.1021/ja403440e
[32] Y. Li, H. Wang, L. Xie, Y. Liang, G. Hong, H. Dai, MoS2 nanoparticles grown on graphene: an advanced catalyst for the hydrogen evolution reaction. J. Am. Chem. Soc. 133(19), 7296–7299 (2011). https://doi.org/10.1021/ja201269b
[33] C. Tang, L. Gan, R. Zhang, W. Lu, X. Jiang, A.M. Asiri, X. Sun, J. Wang, L. Chen, Ternary FexCo1–xP nanowire array as a robust hydrogen evolution reaction electrocatalyst with Pt-like activity: experimental and theoretical insight. Nano Lett. 16(10), 6617–6621 (2016). https://doi.org/10.1021/acs.nanolett.6b03332
[34] Z. Pu, Q. Liu, P. Jiang, A.M. Asiri, A.Y. Obaid, X. Sun, CoP nanosheet arrays supported on a Ti plate: an efficient cathode for electrochemical hydrogen evolution. Chem. Mater. 26(15), 4326–4329 (2014). https://doi.org/10.1021/cm501273s
[35] Y. Zheng, Y. Jiao, Y. Zhu, L. Li, Y. Han et al., Hydrogen evolution by a metal-free electrocatalyst. Nat. Commun. 5, 3783 (2014). https://doi.org/10.1038/ncomms4783
[36] D. Kong, J.J. Cha, H. Wang, H.R. Lee, Y. Cui, First-row transition metal dichalcogenide catalysts for hydrogen evolution reaction. Energy Environ. Sci. 6(12), 3553–3558 (2013). https://doi.org/10.1039/C3EE42413H
[37] J. Kibsgaard, T.F. Jaramillo, Molybdenum phosphosulfide: an active, acid-stable, earth-abundant catalyst for the hydrogen evolution reaction. Angew. Chem. Int. Ed. 53(52), 14433–14437 (2014). https://doi.org/10.1002/anie.201408222
[38] I. Bhugun, D. Lexa, J.M. Savéant, Homogeneous catalysis of electrochemical hydrogen evolution by iron(0) porphyrins. J. Am. Chem. Soc. 118(16), 3982–3983 (1996). https://doi.org/10.1021/ja954326x
[39] D. Kong, H. Wang, Z. Lu, Y. Cui, CoSe2 nanoparticles grown on carbon fiber paper: an efficient and stable electrocatalyst for hydrogen evolution reaction. J. Am. Chem. Soc. 136(13), 4897–4900 (2014). https://doi.org/10.1021/ja501497n
[40] J.R. McKone, B.F. Sadtler, C.A. Werlang, N.S. Lewis, H.B. Gray, Ni–Mo nanopowders for efficient electrochemical hydrogen evolution. ACS Catal. 3(2), 166–169 (2013). https://doi.org/10.1021/cs300691m
[41] R. Subbaraman, D. Tripkovic, D. Strmcnik, K.C. Chang, M. Uchimura, A.P. Paulikas, V. Stamenkovic, N.M. Markovic, Enhancing hydrogen evolution activity in water splitting by tailoring Li+-Ni(OH)2-Pt interfaces. Science 334(6060), 1256–1260 (2011). https://doi.org/10.1126/science.1211934
[42] T. Chao, X. Luo, W. Chen, B. Jiang, J. Ge, Y. Lin, G. Wu, X. Wang, Y. Hu, Z. Zhuang, Y. Wu, X. Hong, Y. Li, Atomically dispersed copper-platinum dual sites alloyed with palladium nanorings catalyze the hydrogen evolution reaction. Angew. Chem. Int. Ed. 56(50), 16263–16267 (2017). https://doi.org/10.1002/anie.201709803
[43] S. Sarkar, S.C. Peter, An overview on Pd-based electrocatalysts for the hydrogen evolution reaction. Inorg. Chem. Front. 5(9), 2060–2080 (2018). https://doi.org/10.1039/C8QI00042E
[44] G. Xu, J. Hui, T. Huang, Y. Chen, J.M. Lee, Platinum nanocuboids supported on reduced graphene oxide as efficient electrocatalyst for the hydrogen evolution reaction. J. Power Sources 285, 393–399 (2015). https://doi.org/10.1016/j.jpowsour.2015.03.131
[45] Y. Mi, L. Wen, Z. Wang, D. Cao, H. Zhao, Y. Zhou, F. Grote, Y. Leia. Ultra-low mass loading of platinum nanoparticles on bacterial cellulose derived carbon nanofibers for efficient hydrogen evolution. Catal. Today 262, 141–145 (2016). https://doi.org/10.1016/j.cattod.2015.08.019
[46] C. Tang, D. Wang, Z. Wu, B. Duan, Tungsten carbide hollow microspheres as electrocatalyst and platinum support for hydrogen evolution reaction. Int. J. Hydrogen Energy 40(8), 3229–3237 (2015). https://doi.org/10.1016/j.ijhydene.2014.12.105
[47] H. Yin, S. Zhao, K. Zha, A. Muqsit, H. Tang et al., Ultrathin platinum nanowires grown on single-layered nickel hydroxide with high hydrogen evolution activity. Nat. Commun. 6, 6430 (2015). https://doi.org/10.1038/ncomms7430
[48] Z. Xing, C. Han, D. Wang Q. Li, X. Yang, Ultrafine Pt nanoparticle-decorated Co(OH)2 nanosheet arrays with enhanced catalytic activity toward hydrogen evolution. ACS Catal. 7(10), 7131−7135 (2017). https://doi.org/10.1021/acscatal.7b01994
[49] R. Huang, Z. Sun, S. Chen, S. Wu, Z. Shen, X. Wu, J. Zeng, Pt-Cu hierarchical quasi great dodecahedrons with abundant twinning defects for hydrogen evolution. Chem. Commun. 53(51), 6922–6925 (2017). https://doi.org/10.1039/C7CC03643D
[50] Y. Shen, A.C. Lua, J. Xi, X. Qiu, Ternary platinum-copper-nickel nanoparticles anchored to hierarchical carbon supports as free-standing hydrogen evolution electrodes. ACS Appl. Mater. Interfaces 8(5), 3464–3472 (2016). https://doi.org/10.1021/acsami.5b11966
[51] P. Wang, X. Zhang, J. Zhang, S. Wan, S. Guo, G. Lu, J. Yao, X. Huang, Precise tuning in platinum-nickel/nickel sulfide interface nanowires for synergistic hydrogen evolution catalysis. Nat. Commun. 8, 14580 (2017). https://doi.org/10.1038/ncomms14580
[52] N. Cheng, S. Stambula, D. Wang, M.N. Banis, J. Liu et al., Platinum single-atom and cluster catalysis of the hydrogen evolution reaction. Nat. Commun. 7, 13638 (2016). https://doi.org/10.1038/ncomms13638
[53] L. Zhang, L. Han, H. Liu, X. Liu, J. Luo, Potential-cycling synthesis of single platinum atoms for efficient hydrogen evolution in neutral media. Angew. Chem. Int. Ed. 56(44), 13694–13698 (2017). https://doi.org/10.1002/anie.201706921
[54] Y. Lee, J. Suntivich, K.J. May, E.E. Perry, Y. Shao-Horn, Synthesis and activities of rutile IrO2 and RuO2 nanoparticles for oxygen evolution in acid and alkaline solutions. J. Phys. Chem. Lett. 3(3), 399–404 (2012). https://doi.org/10.1021/jz2016507
[55] J. Zhang, L. Qu, G. Shi, J. Liu, J. Chen, L. Dai, N,P-codoped carbon networks as efficient metal-free bifunctional catalysts for oxygen reduction and hydrogen evolution reactions. Angew. Chem. Int. Ed. 55(6), 2230–2234 (2016). https://doi.org/10.1002/anie.201510495
[56] L. He, Y. Huang, A. Wang, X. Wang, X. Chen, J.J. Delgado, T. Zhang, A noble-metal-free catalyst derived from Ni-Al hydrotalcite for hydrogen generation from N2H4·H2O decomposition. Angew. Chem. Int. Ed. 51(25), 6191–6194 (2012). https://doi.org/10.1002/anie.201201737
[57] E.J. Popczun, C.G. Read, C.W. Roske, N.S. Lewis, R.E. Schaak, Highly active electrocatalysis of the hydrogen evolution reaction by cobalt phosphide nanoparticles. Angew. Chem. Int. Ed. 53(21), 5427–5430 (2014). https://doi.org/10.1002/anie.201402646
[58] J. Tian, Q. Liu, A.M. Asiri, X. Sun, Self-supported nanoporous cobalt phosphide nanowire arrays: an efficient 3D hydrogen-evolving cathode over the wide range of pH 0-14. J. Am. Chem. Soc. 136(21), 7587–7590 (2014). https://doi.org/10.1021/ja503372r
[59] W. Cui, N. Cheng, Q. Liu, C. Ge, A.M. Asiri, X. Sun, Mo2C nanoparticles decorated graphitic carbon sheets: biopolymer-derived solid-state synthesis and application as an efficient electrocatalyst for hydrogen generation. ACS Catal. 4(8), 2658–2661 (2014). https://doi.org/10.1021/cs5005294
[60] Y. Xu, M. Gao, Y. Zheng, J. Jiang, S. Yu, Nickel/Nickel(II) oxide nanoparticles anchored onto cobalt(IV) diselenide nanobelts for the electrochemical production of hydrogen. Angew. Chem. Int. Ed. 52(33), 8546–8550 (2013). https://doi.org/10.1002/anie.201303495
[61] X. Wang, K. Maeda, A. Thomas, K. Takanabe, G. Xin, J.M. Carlsson, K. Domen, M. Antonietti, A metal-free polymeric photocatalyst for hydrogen production from water under visible light. Nat. Mater. 8(1), 76–80 (2009). https://doi.org/10.1038/nmat2317
[62] A.L. Goff, V. Artero, B. Jousselme, P.D. Tran, N. Guillet et al., From hydrogenases to noble metal-free catalytic nanomaterials for H2 production and uptake. Science 326(5958), 1384–1387 (2009). https://doi.org/10.1126/science.1179773
[63] W. Chen, J.T. Muckerman, E. Fujita, Recent developments in transition metal carbides and nitrides as hydrogen evolution electrocatalysts. Chem. Commun. 49(79), 8896–8909 (2013). https://doi.org/10.1039/C3CC44076A
[64] Q. Liu, J. Tian, W. Cui, N. Cheng, A.M. Asiri, X. Sun, Carbon nanotubes decorated with CoP nanocrystals: a highly active non-noble-metal nanohybrid electrocatalyst for hydrogen evolution. Angew. Chem. Int. Ed. 53(26), 6710–6714 (2014). https://doi.org/10.1002/anie.201404161
[65] P. Jiang, Q. Liu, Y. Liang, J. Tian, A.M. Asiri, X. Sun, A cost-effective 3D hydrogen evolution cathode with high catalytic activity: FeP nanowire array as the active phase. Angew. Chem. Int. Ed. 53(47), 12855–12859 (2014). https://doi.org/10.1002/anie.201406848
[66] C.G. Morales-Guio, X. Hu, Amorphous molybdenum sulfides as hydrogen evolution catalysts. Acc. Chem. Res. 47(8), 2671–2681 (2014). https://doi.org/10.1021/ar5002022
[67] B. Cao, G.M. Veith, J.C. Neuefeind, R.R. Adzic, P.G. Khalifah, Mixed close-packed cobalt molybdenum nitrides as non-noble metal electrocatalysts for the hydrogen evolution reaction. J. Am. Chem. Soc. 135(51), 19186–19192 (2013). https://doi.org/10.1021/ja4081056
[68] Y. Zhao, F. Zhao, X. Wang, C. Xu, Z. Zhang, G. Shi, L. Qu, Graphitic carbon nitride nanoribbons: graphene-assisted formation and synergic function for highly efficient hydrogen evolution. Angew. Chem. Int. Ed. 53(50), 13934–13939 (2014). https://doi.org/10.1002/anie.201409080
[69] I.S. Amiinu, Z. Pu, X. Liu, K.A. Owusu, H.G. Monestel, F.O. Boakye, H. Zhang, S. Mu, Multifunctional Mo–N/C@MoS2 electrocatalysts for HER, OER, ORR, and Zn–air batteries. Adv. Funct. Mater. 27(44), 1702300 (2017). https://doi.org/10.1002/adfm.201702300
[70] R. Adhikari, K. Basu, Y. Zhou, F. Vetrone, D. Ma et al., Heterostructured quantum dot architectures for efficient and stable photoelectrochemical hydrogen production. J. Mater. Chem. A 6(16), 6822–6829 (2018). https://doi.org/10.1039/C7TA11378A
[71] X.Y. Yu, Y. Feng, Y. Jeon, B.Y. Guan, X.W. Lou, U. Paik, Formation of Ni-Co-MoS2 nanoboxes with enhanced electrocatalytic activity for hydrogen evolution. Adv. Mater. 28(40), 9006– 9011 (2016). https://doi.org/10.1002/adma.201601188
[72] F.X. Ma, H.B. Wu, B.Y. Xia, C.Y. Xu, X.W. Lou, Hierarchical β-Mo2C nanotubes organized by ultrathin nanosheets as a highly efficient electrocatalyst for hydrogen production. Angew. Chem. Int. Ed. 54(51), 15395–5399 (2015). https://doi.org/10.1002/anie.201508715
[73] L. Liu, A. Corma, Metal catalysts for heterogeneous catalysis: from single atoms to nanoclusters and nanoparticles. Chem. Rev. 118(10), 4981–5079 (2018). https://doi.org/10.1021/acs.chemrev.7b00776
[74] S.X. Liang, C. Hao, Y.T. Shi, The power of single-atom catalysis. ChemCatChem 7(17), 2559–2567 (2015). https://doi.org/10.1002/cctc.201500363
[75] J. Kim, H.E. Kim, H. Lee, Single-atom catalysts of precious metals for electrochemical reactions. ChemSusChem 11(1), 104–113 (2018). https://doi.org/10.1002/cssc.201701306
[76] X.F. Yang, A. Wang, B. Qiao, J. Li, J. Liu, T. Zhang, Single-atom catalysts: a new frontier in heterogeneous catalysis. Acc. Chem. Res. 46(8), 1740–1748 (2013). https://doi.org/10.1021/ar300361m
[77] B.T. Qiao, A.Q. Wang, X.F. Yang, L.F. Allard, Z. Jiang et al., Single-atom catalysis of CO oxidation using Pt1/FeOx. Nat. Chem. 3(8), 634–641 (2011). https://doi.org/10.1038/nchem.1095
[78] B. Bayatsarmadi, Y. Zheng, A. Vasileff, S.Z. Qiao, Recent advances in atomic metal doping of carbon-based nanomaterials for energy conversion. Small 13(21), 1700191 (2017). https://doi.org/10.1002/smll.201700191
[79] A. Wang, J. Li, T. Zhang, Heterogeneous single-atom catalysis. Nat. Rev. Chem. 2, 65–81 (2018). https://doi.org/10.1038/s41570-018-0010-1
[80] L.Q. Wang, L. Huang, F. Liang, S.M. Liu, Y.H. Wang, H.J. Zhang, Preparation, characterization and catalytic performance of single-atom catalysts. Chin. J. Catal. 38(9), 1528–1539 (2017). https://doi.org/10.1016/S1872-2067(17)62770-0
[81] C. Liu, Q. Li, C. Wu, J. Zhang, Y. Jin, D.R. MacFarlane, C. Sun, Single-boron catalysts for nitrogen reduction reaction. J. Am. Chem. Soc. 141(7), 2884-2888 (2019). https://doi.org/10.1021/jacs.8b13165
[82] J. Su, R. Ge, Y. Dong, F. Hao, L. Chen, Recent progress in single-atom electrocatalysts: concept, synthesis, and applications in clean energy conversion. J. Mater. Chem. A 6(29), 14025–14042 (2018). https://doi.org/10.1039/C8TA04064H
[83] A. Corma, P. Concepcion, M. Boronat, M.J. Sabater, J. Navas et al., Exceptional oxidation activity with size-controlled supported gold clusters of low atomicity. Nat. Chem. 5(9), 775–781 (2013). https://doi.org/10.1038/nchem.1721
[84] P. Liu, Y. Zhao, R. Qin, S. Mo, G. Chen et al., Photochemical route for synthesizing atomically dispersed palladium catalysts. Science 352(6287), 797–801 (2016). https://doi.org/10.1126/science.aaf5251
[85] R. Lang, T. Li, D. Matsumura, S. Miao, Y. Ren et al., Hydroformylation of olefins by a rhodium single-atom catalyst with activity comparable to RhCl(PPh3)3. Angew. Chem. Int. Ed. 55(52), 16054–16058 (2016). https://doi.org/10.1002/anie.201607885
[86] F. Chen, X. Jiang, L. Zhang, R. Lang, B. Qiao, Single-atom catalysis: bridging the homo-and heterogeneous catalysis. Chin. J. Catal. 39(5), 893–898 (2018). https://doi.org/10.1016/S1872-2067(18)63047-5
[87] J. Yang, D. He, W. Chen, W. Zhu, H. Zhang et al., Bimetallic Ru-Co clusters derived from a confined alloying process within zeolite-imidazolate frameworks for efficient NH3 decomposition and synthesis. ACS Appl. Mater. Interfaces 9(45), 39450−39455 (2017). https://doi.org/10.1021/acsami.7b14134
[88] S. Tian, Q. Fu, W. Chen, Q. Feng, Z. Chen et al., Carbon nitride supported Fe2 cluster catalysts with superior performance for alkene epoxidation. Nat. Commun. 9(1), 2353 (2018). https://doi.org/10.1038/s41467-018-04845-x
[89] X. Dai, Z. Chen, T. Yao, L. Zheng, Y. Lin et al., Single Ni sites distributed on N-doped carbon for selective hydrogenation of acetylene. Chem. Commun. 53(84), 11568 (2017). https://doi.org/10.1039/C7CC04820C
[90] T. Chao, Y. Hu, X. Hong, Y. Li, Design of noble metal electrocatalysts on an atomic level. ChemElectroChem 6(2), 289−303 (2019). https://doi.org/10.1002/celc.201801189
[91] S.T. Hunt, M. Milina, Z. Wang, Y. Román-Leshkov, Activating earth-abundant electrocatalysts for efficient, low-cost hydrogen evolution/oxidation: sub-monolayer platinum coatings on titanium tungsten carbide nanoparticles. Energy Environ. Sci. 9(10), 3290–3301 (2016). https://doi.org/10.1039/C6EE01929C
[92] J. Deng, H.B. Li, J.P. Xiao, Y.C. Tu, D.H. Deng et al., Triggering the electrocatalytic hydrogen evolution activity of the inert two-dimensional MoS2 surface via single-atom metal doping. Energy Environ. Sci. 8(5), 1594–1601 (2015). https://doi.org/10.1039/C5EE00751H
[93] M. Tavakkoli, N. Holmberg, R. Kronberg, H. Jiang, J. Sainio, E. I. Kauppinen, T. Kallio, K. Laasonen, Electrochemical activation of single-walled carbon nanotubes with pseudo-atomic-scale platinum for the hydrogen evolution reaction. ACS Catal. 7(5), 3121–3130 (2017). https://doi.org/10.1021/acscatal.7b00199 [94] H. Fei, J. Dong, M.J. Arellano-Jimenez, G. Ye, N. Dong Kim, E.L. Samuel et al., Atomic cobalt on nitrogen-doped graphene for hydrogen generation. Nat. Commun. 6, 8668 (2015). https://doi.org/10.1038/ncomms9668
[95] X.J. Zeng, J.L. Shui, X.F. Liu, Q.T. Liu, Y.C. Li, J.X. Shang, L.R. Zheng, R.H. Yu, Single-atom to single-atom grafting of Pt1 onto Fe-N4 center: Pt1@Fe-N-C multifunctional electrocatalyst with significantly enhanced properties. Adv. Energy Mater. 8(1), 1701345 (2018). https://doi.org/10.1002/aenm.201701345
[96] Z. Geng, Y. Cao, W.Chen, X. Kong, Y. Liu, T. Yao, Y. Lin, Regulating the coordination environment of Co single atoms for achieving efficient electrocatalytic activity in CO2 reduction. Appl. Catal. B: Environ. 240, 234–240 (2019). https://doi.org/10.1016/j.apcatb.2018.08.075
[97] S. Dou, C. Dong. Z. Hu, Y. Huang, J. Chen et al., Atomic-scale CoOx species in metal-organic frameworks for oxygen evolution reaction. Adv. Funct. Mater. 27(36), 1702546 (2017). https://doi.org/10.1002/adfm.201702546
[98] M. Tavakkoli, N. Holmberg, R. Kronberg, H. Jiang, J. Sainio, E.I. Kauppinen, T. Kallio, K. Laasonen, Electrochemical activation of single-walled carbon nanotubes with pseudo-atomic-scale platinum for the hydrogen evolution reaction. ACS Catal. 7(5), 3121–3130 (2017). https://doi.org/10.1021/acscatal.7b00199
[99] L. Yang, L. Shi, D. Wang, Y. Lv, D. Cao, Single-atom cobalt electrocatalysts for foldable solid-state Zn-air battery. Nano Energy 50, 691–698 (2018). https://doi.org/10.1016/j.nanoen.2018.06.023
[100] H.L. Fei, J.C. Dong, Y.X. Feng, C.S. Allen, C.Z. Wan et al., General synthesis and definitive structural identification of MN4C4 single-atom catalysts with tunable electrocatalytic activities. Nat. Catal. 1(1), 63–72 (2018). https://doi.org/10.1038/s41929-017-0008-y
[101] P.Z. Chen, T.P. Zhou, L.L. Xing, K. Xu, Y. Tong et al., Atomically dispersed iron-nitrogen species as electrocatalysts for bifunctional oxygen evolution and reduction reactions. Angew. Chem. Int. Ed. 56(2), 610–614 (2017). https://doi.org/10.1002/anie.201610119
[102] Q. Niu, B.Chen, J. Guo, J. Nie, X. Guo, G. Ma, Flexible, porous, and metal–heteroatom-doped carbon nanofibers as efficient ORR electrocatalysts for Zn–Air battery. Nano-Micro Lett. 11, 8 (2019). https://doi.org/10.1007/s40820-019-0238-4
[103] P. Yin, T. Yao, Y. Wu, L. R. Zheng, Y. Lin et al., Single cobalt atoms with precise N-coordination as superior oxygen reduction reaction catalysts. Angew. Chem. Int. Ed. 55(36), 10800–10805 (2016). https://doi.org/10.1002/anie.201604802
[104] Y.J. Chen, S.F. Ji, Y.Y. Wang, J.C. Dong, W.X. Chen et al., Isolated single iron atoms anchored on N-doped porous carbon as an efficient electrocatalyst for the oxygen reduction reaction. Angew. Chem. Int. Ed. 56(24), 6937–6941 (2017). https://doi.org/10.1002/anie.201702473
[105] C. Zhao, X. Dai, T. Yao, W. Chen, X. Wang et al., Ionic exchange of metal-organic frameworks to access single nickel sites for efficient electroreduction of CO2. J. Am. Chem. Soc. 139(24), 8078–8081 (2017). https://doi.org/10.1021/jacs.7b02736
[106] B. Wang, X. Wang, J. Zou, Y. Yan, S. Xie, G. Hu, Y. Li, A. Dong, Simple-cubic carbon frameworks with atomically dispersed iron dopants toward high-efficiency oxygen reduction. Nano Lett. 17(3), 2003–2009 (2017). https://doi.org/10.1021/acs.nanolett.7b00004
[107] C. Zhang, J. Sha, H. Fei, Mi. Liu, S. Yazdi et al., Single-atomic ruthenium catalytic sites on nitrogen-doped graphene for oxygen reduction reaction in acidic medium. ACS Nano 11(7), 6930–6941 (2017). https://doi.org/10.1021/acsnano.7b02148
[108] Y. Han, Y. Wang, W. Chen, R. Xu, L. Zheng et al., Hollow N-doped carbon spheres with isolated cobalt single atomic sites: superior electrocatalysts for oxygen reduction. J. Am. Chem. Soc. 139(48), 17269–17272 (2017). https://doi.org/10.1021/jacs.7b10194
[109] Z. Zhang, X. Gao, M. Dou, J. Ji, F. Wang, Biomass derived N-doped porous carbon supported single Fe atoms as superior electrocatalysts for oxygen reduction. Small 13(22), 1604290 (2017). https://doi.org/10.1002/smll.201604290
[110] C.W. Lee, K.D. Yang, D.H. Nam, J.H. Jang, N.H. Cho, S.W. Im, K.T. Nam, Defining a materials database for the design of copper binary alloy catalysts for electrochemical CO2 conversion. Adv. Mater. 30(42), 1704717 (2018). https://doi.org/10.1002/adma.201704717
[111] M. Zhang, Q. Dai, H. Zheng, M. Chen, L. Dai, Novel MOF-derived Co@N-C bifunctional catalysts for highly efficient Zn-air batteries and water splitting. Adv. Mater. 30(10), 1705431 (2018). https://doi.org/10.1002/adma.201705431
[112] Y. Wang, J. Liu, Y. Wang, A.M. Al-Enizi, G. Zheng, Tuning of CO2 reduction selectivity on metal electrocatalysts. Small 13(43), 1701809 (2017). https://doi.org/10.1002/smll.201701809
[113] P. Song, M. Luo, X. Liu, W. Xing, W. Xu, Z. Jiang, L. Gu, Zn single atom catalyst for highly efficient oxygen reduction reaction. Adv. Funct. Mater. 27(28), 1700802 (2017). https://doi.org/10.1002/adfm.201700802
[114] Y.X. Duan, F.L. Meng, K.H. Liu, S.S. Yi, S.J. Li, J.M. Yan, Q. Jiang, Amorphizing of Cu nanoparticles toward highly efficient and robust electrocatalyst for CO2 reduction to liquid fuels with high faradaic efficiencies. Adv. Mater. 30(14), 1706194 (2018). https://doi.org/10.1002/adma.201706194
[115] A. Vasileff, Y. Zheng, S.Z. Qiao, Carbon solving carbon's problems: recent progress of nanostructured carbon-based catalysts for the electrochemical reduction of CO2. Adv. Energy Mater. 7(21), 1700759 (2017). https://doi.org/10.1002/aenm.201700759
[116] W. Ju, A. Bagger, G.P. Hao, A.S. Varela, I. Sinev et al., Understanding activity and selectivity of metal-nitrogen-doped carbon catalysts for electrochemical reduction of CO2. Nat. Commun. 8(1), 944 (2017). https://doi.org/10.1038/s41467-017-01035-z
[117] Y. Cao, Y. Gao, H. Zhou, X. Chen, H. Hu et al., Highly efficient ammonia synthesis electrocatalyst: single Ru atom on naturally nanoporous carbon materials. Adv. Theory Simul. 1(5), 1800018 (2018). https://doi.org/10.1002/adts.201800018
[118] J. Zhao, Z. Chen, Single Mo atom supported on defective boron nitride monolayer as an efficient electrocatalyst for nitrogen fixation: a computational study. J. Am. Chem. Soc. 139(36), 12480–12487 (2017). https://doi.org/10.1021/jacs.7b05213
[119] C. Ling, X. Bai, Y. Ouyang, A. Du, J. Wang, Single molybdenum atom anchored on N-doped carbon as a promising electrocatalyst for nitrogen reduction into ammonia at ambient conditions. J. Phys. Chem. C 122(29), 16842–16847 (2018). https://doi.org/10.1021/acs.jpcc.8b05257
[120] H. Zhang, G. Liu, L. Shi, J. Ye, Single-atom catalysts: emerging multifunctional materials in heterogeneous catalysis. Adv. Energy Mater. 8(1), 1701343 (2018). https://doi.org/10.1002/aenm.201701343
[121] V. Vij, S. Sultan, A.M. Harzandi, A. Meena, J.N. Tiwari, W.-G. Lee, T. Yoon, K.S. Kim, Nickel-based electrocatalysts for energy-related applications: oxygen reduction, oxygen evolution, and hydrogen evolution reactions. ACS Catal. 7(10), 7196–7225 (2017). https://doi.org/10.1021/acscatal.7b01800
[122] X. Li, W. Bi, M. Chen, Y. Sun, H. Ju et al., Exclusive Ni-N4 sites realize near-unity CO selectivity for electrochemical CO2 reduction. J. Am. Chem. Soc. 139(42), 14889–14892 (2017). https://doi.org/10.1021/jacs.7b09074
[123] D.J. Harding, C. Kerpal, G. Meijer, A. Fielicke, Activated methane on small cationic platinum clusters. Angew. Chem. Int. Ed. 51(3), 817–819 (2012). https://doi.org/10.1002/anie.201107042
[124] J. Lin, A. Wang, B. Qiao, X. Liu, X. Yang et al., Remarkable performance of Ir1/FeOx single-atom catalyst in water gas shift reaction. J. Am. Chem. Soc. 135(41), 15314–15317 (2013). https://doi.org/10.1021/ja408574m
[125] Y. Chen, S. Ji, C. Chen, Q. Peng, D. Wang, Y. Li, Single-atom catalysts: synthetic strategies and electrochemical applications. Joule 2(7), 1242–1264 (2018). https://doi.org/10.1016/j.joule.2018.06.019
[126] H. Wei, K. Huang, D. Wang, R. Zhang, B. Ge et al., Iced photochemical reduction to synthesize atomically dispersed metals by suppressing nanocrystal growth. Nat. Commun. 8(1), 1490 (2017). https://doi.org/10.1038/s41467-017-01521-4
[127] M. Tavakkoli, N. Holmberg, R. Kronberg, H. Jiang, J. Sainio, E.I. Kauppinen, T. Kallio, K. Laasonen, Electrochemical activation of single-walled carbon nanotubes with pseudo-atomic-scale platinum for the hydrogen evolution reaction. ACS Catal. 7(5), 3121−3130 (2017). https://doi.org/10.1021/acscatal.7b00199
[128] J. Yang, B. Chen, X. Liu, W. Liu, Z. Li et al., Efficient and robust hydrogen evolution: phosphorus nitride imide nanotubes as supports for anchoring single ruthenium sites. Angew. Chem. Int. Ed. 57(30), 9495–9500 (2018). https://doi.org/10.1002/anie.201804854
[129] Y. Qu, L. Wang, Z. Li, P. Li, Q. Zhang et al., Ambient synthesis of single-atom catalysts from bulk metal via trapping of atoms by surface dangling bonds. Adv. Mater. 31(44) 1904496, (2019). https://doi.org/10.1002/adma.201904496
[130] B. Han, R. Lang, B. Qiao, A. Wang, T. Zhang, Highlights of the major progress in single-atom catalysis in 2015 and 2016. Chin. J. Catal. 38(9), 1498–1507 (2017). https://doi.org/10.1016/S1872-2067(17)62872-9
[131] H. Wei, X. Liu, A. Wang, L. Zhang, B. Qiao et al., FeOx-supported platinum single-atom and pseudo-single-atom catalysts for chemoselective hydrogenation of functionalized nitroarenes. Nat. Commun. 5(1), 5634 (2014). https://doi.org/10.1038/ncomms6634
[132] M. Moses-DeBusk, M. Yoon, L.F. Allard, D.R. Mullins, Z. Wu et al., CO oxidation on supported single Pt atoms: experimental and ab initio density functional studies of CO interaction with Pt atom on θ-Al2O3(010) surface. J. Am. Chem. Soc. 135(34) 12634–12645 (2013). https://doi.org/10.1021/ja401847c
[133] T.K. Ghosh, N.N. Nair, Rh1/γ‐Al2O3 single-atom catalysis of O2 activation and CO oxidation: mechanism, effects of hydration, oxidation state, and cluster size. ChemCatChem 5(7), 1811–1821 (2013). https://doi.org/10.1002/cctc.201200799
[134] G. Spezzati, Y. Su, J.P. Hofmann, A.D. Benavidez, A.T. DeLaRiva, J. McCabe, A.K. Datye, E.J. M. Hensen, Atomically dispersed Pd-O species on CeO2(111) as highly active sites for low-temperature CO oxidation. ACS Catal. 7(10), 6887–6891 (2017). https://doi.org/10.1021/acscatal.7b02001
[135] J. Wan, W. Chen, C. Jia, L. Zheng, J. Dong et al., Defect effects on TiO2 nanosheets: stabilizing single atomic site Au and promoting catalytic properties. Adv. Mater. 30(11), 1705369 (2018). https://doi.org/10.1002/adma.201705369
[136] B. Qiao, J. Liu, Y.-G. Wang, Q. Lin, X. Liu et al., Highly efficient catalysis of preferential oxidation of CO in H2-rich stream by gold single-atom catalysts. ACS Catal. 5(11), 6249–6254 (2015). https://doi.org/10.1021/acscatal.5b01114
[137] B.J.O’Neill, D.H. Jackson, J. Lee, C. Canlas, P.C. Stair et al., Catalyst design with atomic layer deposition. ACS Catal. 5(3), 1804−1825 (2015). https://doi.org/10.1021/cs501862h
[138] V. Aleskovsky, M. Koltcov, USSR Patent USSR422446 (1972).
[139] S. Sun, G. Zhang, N. Gauquelin, N. Chen, J. Zhou et al., Single-atom catalysis using Pt/graphene achieved through atomic layer deposition. Sci. Rep. 3(5), 1775 (2013). https://doi.org/10.1038/srep01775
[140] H. Yan, H. Cheng, H. Yi, Y. Lin, T. Yao et al., Single-atom Pd1/graphene catalyst achieved by atomic layer deposition: remarkable performance in selective hydrogenation of 1,3-butadiene. J. Am. Chem. Soc. 137(33), 10484–10487 (2015). https://doi.org/10.1021/jacs.5b06485
[141] M.P. Hermida, Z. Lu, A. White, K.B. Low, T.P. Wu, J.W. Elam, Z.L. Wu, Y. Lei, Towards ALD thin film stabilized single-atom Pd1 catalysts. Nanoscale 8(33), 15348–15356 (2016). https://doi.org/10.1039/C6NR04403D
[142] L. Zhang, Z. Zhao, M. Norouzi Banis, L. Li, Y. Zhao et al., Selective atomic layer deposition of RuOx catalysts on shape-controlled Pd nanocrystals with significantly enhanced hydrogen evolution activity. J. Mater. Chem. A 6(47), 24397–24406 (2018). https://doi.org/10.1039/C8TA08931K
[143] S.J. Jeong, Y. Gu, J. Heo, J. Yang, C.S. Lee et al., Thickness scaling of atomic-layer-deposited HfO2 films and their application to wafer-scale graphene tunnelling transistors. Sci. Rep. 6(10), 20907 (2016). https://doi.org/10.1038/srep20907
[144] M. Leskela, M. Ritala, Atomic layer deposition chemistry: recent developments and future challenges. Angew. Chem. Int. Ed. 42(45), 5548–5554 (2003). https://doi.org/10.1002/anie.200301652
[145] H. Kim, J. Vac, Atomic layer deposition of metal and nitride thin films: current research efforts and applications for semiconductor device processing. Sci. Technol. B 21(6), 2231–2261 (2003). https://doi.org/10.1116/1.162267
[146] R.J. Kuppler, D.J. Timmons, Q. Fang, J. Li, T.A. Makal et al., Potential applications of metal-organic frameworks. Coord. Chem. Rev. 253(23-24), 3042–3066 (2009). https://doi.org/10.1016/j.ccr.2009.05.019
[147] H. Furukawa, K.E. Cordova, M. O'Keeffe, O.M. Yaghi, The chemistry and applications of metal-organic frameworks. Science 341(6149), 1230444 (2013). https://doi.org/10.1126/science.1230444
[148] A.J. Howarth, Y. Liu, P. Li, Z. Li, T.C. Wang, J.T. Hupp, O.K. Farha, Chemical, thermal and mechanical stabilities of metal-organic frameworks. Nat. Rev. Mater. 1, 15018 (2016). https://doi.org/10.1038/natrevmats.2015.18
[149] X. Wang, Z. Chen, X. Zhao, T. Yao, W. Chen et al., Regulation of coordination number over single Co sites: triggering the efficient electroreduction of CO2. Angew. Chem. Int. Ed. 57(7), 1944–1948 (2018). https://doi.org/10.1002/anie.201712451
[150] W. Chen, J. Pei, C. He, J. Wan, H. Ren et al., Single tungsten atoms supported on MOF-derived N-doped carbon for robust electrochemical hydrogen evolution. Adv. Mater. 30(30), 1800396 (2018). https://doi.org/10.1002/adma.201800396
[151] Y. Pan, R. Lin, Y. Chen, S. Liu, W. Zhu et al., Design of single-atom Co-N5 catalytic site: a robust electrocatalyst for CO2 reduction with nearly 100% CO selectivity and remarkable stability. J. Am. Chem. Soc. 140(12), 4218−4221 (2018). https://doi.org/10.1021/jacs.8b00814
[152] J. Wang, Z. Huang, W. Liu, C. Chang, H. Tang et al., Design of N-coordinated dual-metal sites: a stable and active Pt-free catalyst for acidic oxygen reduction reaction. J. Am. Chem. Soc. 139(48), 17281–17284 (2017). https://doi.org/10.1021/jacs.7b10385
[153] S. Ji, Y. Chen, Q. Fu, Y. Chen, J. Dong et al., Confined pyrolysis within metal-organic frameworks to form uniform Ru3 clusters for efficient oxidation of alcohols. J. Am. Chem. Soc. 139(29), 9795–9798 (2017). https://doi.org/10.1021/jacs.7b05018
[154] X. Wang, W. Chen, L. Zhang, T. Yao, W. Liu et al., Uncoordinated amine groups of metal-organic frameworks to anchor single Ru sites as chemoselective catalysts toward the hydrogenation of quinoline. J. Am. Chem. Soc. 139(28), 9419–9422 (2017). https://doi.org/10.1021/jacs.7b01686
[155] W. Chen, J. Pei, C. He, J. Wan, H. Ren et al., Rational design of single molybdenum atoms anchored on N-doped carbon for effective hydrogen evolution reaction. Angew. Chem. Int. Ed. 56(50), 16086–16090 (2017). https://doi.org/10.1002/anie.201710599
[156] G. Dong, M. Fang, H. Wang, S. Yip, H.-Y. Cheung et al., Insight into the electrochemical activation of carbon-based cathodes for hydrogen evolution reaction. J. Mater. Chem. A 3(24), 13080–13086 (2015). https://doi.org/10.1039/C5TA02551F
[157] Y. Xue, B. Huang, Y. Yi, Y. Guo, Z. Zuo et al., Anchoring zero valence single atoms of nickel and iron on graphdiyne for hydrogen evolution. Nat. Commun. 9(1), 1460 (2018). https://doi.org/10.1038/s41467-018-03896-4
[158] J. Jones, H. Xiong, A.T. DeLaRiva, E.J. Peterson, H. Pham et al., Thermally stable single-atom platinum-on-ceria catalysts via atom trapping. Science 353(6295), 150–154 (2016). https://doi.org/10.1126/science.aaf8800
[159] S. Wei, A. Li, J. Liu, Z. Li, W. Chen et al., Direct observation of noble metal nanoparticles transforming to thermally stable single atoms. Nat. Nanotechnol. 13(9), 856–861 (2018). https://doi.org/10.1038/s41565-018-0197-9
[160] J. Yang, Z. Qiu, C. Zhao, W. Wei, W. Chen et al., In situ thermal atomization to convert supported nickel nanoparticles into surface-bound nickel single-atom catalysts. Angew. Chem. Int. Ed. 57(43), 14095–14100 (2018). https://doi.org/10.1002/anie.201808049
[161] Y. Qu, Z. Li, W. Chen, Y. Lin, T. Yuan et al., Direct transformation of bulk copper into copper single sites via emitting and trapping of atoms. Nat. Catal. 1, 781–786 (2018). https://doi.org/10.1038/s41929-018-0146-x
[162] Y. Qu, B. Chen, Z. Li, X. Duan, L. Wang et al., Thermal emitting strategy to synthesize atomically dispersed Pt metal sites from bulk Pt metal. J. Am. Chem. Soc., 141(11), 4505-4509 (2019). https://doi.org/10.1021/jacs.8b09834
[163] J. Zhang, Y. Zhao, X. Guo, C. Chen, C. Dong et al., Single platinum atoms immobilized on an MXene as an efficient catalyst for the hydrogen evolution reaction. Nat. Catal. 1, 985–992 (2018). https://doi.org/10.1038/s41929-018-0195-1
[164] D. Zhao, Z. Chen, W. Yang, S. Liu, X. Zhang et al., MXene (Ti3C2) vacancy-confined single-atom catalyst for efficient functionalization of CO2. J. Am. Chem. Soc. 141(8), 4086-4093 (2019). https://doi.org/10.1021/jacs.8b13579
[165] J. Zhang, X. Wu, W.-C. Cheong, W. Chen, R. Lin et al., Cation vacancy stabilization of single-atomic-site Pt1/Ni(OH)x catalyst for diboration of alkynes and alkenes. Nat. Commun. 9(1), 1002 (2018). https://doi.org/10.1038/s41467-018-03380-z
[166] X. Li, J. Yu, J. Jia, A. Wang, L. Zhao, T. Xiong, H. Liu, W. Zhou, Confined distribution of platinum clusters on MoO2 hexagonal nanosheets with oxygen vacancies as a high-efficiency electrocatalyst for hydrogen evolution reaction. Nano Energy 62, 127–135 (2019). https://doi.org/10.1016/j.nanoen.2019.05.013
[167] Y. Wang, Z. Chen, P. Han, Y. Du, Z. Gu, X. Xu, G. Zheng, Single-atomic Cu with multiple oxygen vacancies on ceria for electrocatalytic CO2 reduction to CH4. ACS Catal. 8(8), 7113–7119 (2018). https://doi.org/10.1021/acscatal.8b01014
[168] P. Liu, Y. Zhao, R. Qin, S. Mo, G. Chen et al., Photochemical route for synthesizing atomically dispersed palladium catalysts. Science 352(6287), 797–800 (2016). https://doi.org/10.1126/science.aaf5251
[169] D. Deng, X. Chen, L. Yu, X. Wu, Q. Liu et al., A single iron site confined in a graphene matrix for the catalytic oxidation of benzene at room temperature. Sci Adv. 1(11), 1500462 (2015). https://doi.org/10.1126/sciadv.1500462
[170] J.H. Kwak, J. Hu, D. Mei, C.W. Yi, D.H. Kim, C. Peden, H.L. Allard, J. Szanyi, Coordinatively unsaturated Al3+ centers as binding sites for active catalyst phases of platinum on gamma-Al2O3. Science 325(5948), 1670−1673 (2009). https://doi.org/10.1126/science.1176745
[171] A. Corma, O.G. Salnikov, D.A. Barskiy, K.V. Kovtunov, I.V. Koptyug, Single-atom gold catalysis in the context of developments in parahydrogen-induced polarization. Chem. Eur. J. 21(19), 7012−7015 (2015). https://doi.org/10.1002/chem.201406664
[172] J. Ryczkowski, IR spectroscopy in catalysis. Catal. Today 68(4), 263−381 (2001). https://doi.org/10.1016/S0920-5861(01)00334-0
[173] C. Lamberti, A. Zecchina, E. Groppo, S. Bordiga, Probing the surfaces of heterogeneous catalysts by in situ IR spectroscopy. Chem. Soc. Rev. 39(12), 4951−5001 (2010). https://doi.org/10.1039/C0CS00117A
[174] Y. Zhou, G. Gao, Y. Li, W. Chu, L. Wang, Transition-metal single atoms in nitrogen-doped graphenes as efficient active centers for water splitting: a theoretical study. Phys. Chem. Chem. Phys. 21(6), 3024−3032 (2019). https://doi.org/10.1039/C8CP06755D
[175] C. Ling, L. Shi, Y. Ouyang, X. Zeng, J. Wang, Nanosheet supported single-metal atom bifunctional catalyst for overall water splitting. Nano Lett. 17(8), 5133−5139 (2017). https://doi.org/10.1021/acs.nanolett.7b02518
[176] Z. Geng, Y. Liu, X. Kong, P. Li, K. Li et al., Achieving a record-high yield rate of 120.9 μg NH3  mgcat.-1  h-1 for N2 electrochemical reduction over Ru single-atom catalysts. Adv. Mater. 30(40), 1803498 (2018). https://doi.org/10.1002/adma.201803498
[177] K. Mori, T. Taga, H. Yamashita, Isolated single-atomic Ru catalyst bound on a layered double hydroxide for hydrogenation of CO2 to formic acid. ACS Catal. 7(5), 3147−3151 (2017). https://doi.org/10.1021/acscatal.7b00312
[178] H. Zhang, P. An, W. Zhou, B.Y. Guan, P. Zhang, J. Dong, X.W. Lou, Dynamic traction of lattice-confined platinum atoms into mesoporous carbon matrix for hydrogen evolution reaction. Sci. Adv. 4(1), eaao6657 (2018). https://doi.org/10.1126/sciadv.aao6657
[179] X. Yin, H. Wang, S. Tang, X. Lu, M. Shu, R. Si, T. Lu, Engineering the coordination environment of single-atom platinum anchored on graphdiyne for optimizing electrocatalytic hydrogen evolution. Angew. Chem. Int. Ed. 57(30), 9382–9386 (2018). https://doi.org/10.1002/anie.201804817
[180] Z. Luo, Y. Ouyang, H. Zhang, M. Xiao, J. Ge et al., Chemically activating MoS2 via spontaneous atomic palladium interfacial doping towards efficient hydrogen evolution. Nat. Commun. 9(1), 2120 (2018). https://doi.org/10.1038/s41467-018-04501-4
[181] Y. Guan, Y. Feng, J. Wan, X. Yang, L. Fang et al., Ganoderma-like MoS2/NiS2 with single platinum atoms doping as an efficient and stable hydrogen evolution reaction catalyst. Small 14(27), 1800697 (2018). https://doi.org/10.1002/smll.201800697
[182] L. Fan, P. Liu, X. Yan, L. Gu, Z. Yang, H. Yang, S. Qiu, X. Yao, Atomically isolated nickel species anchored on graphitized carbon for efficient hydrogen evolution electrocatalysis. Nat. Commun. 7, 10667 (2016). https://doi.org/10.1038/ncomms10667
[183] H. Qiu, Y. Ito, W. Cong, Y. Tan, P. Liu et al., Nanoporous graphene with single-atom nickel dopants: an efficient and stable catalyst for electrochemical hydrogen production. Angew. Chem. Int. Ed. 54(47), 14031–14035 (2015). https://doi.org/10.1002/anie.201507381 [184] C. Zhang, S. Yang, J. Wu, M. Liu, S. Yazdi et al., Electrochemical CO2 reduction with atomic iron-dispersed on nitrogen-doped graphene. Adv. Energy Mater. 8(19),1703487 (2018). https://doi.org/10.1002/aenm.201703487
[185] L. Cao, Q. Luo, W. Liu, Y. Lin, X. Liu et al., Identification of single-atom active sites in carbon-based cobalt catalysts during electrocatalytic hydrogen evolution. Nat. Catal. 2,134–141 (2019). https://doi.org/10.1038/s41929-018-0203-5
[186] T. He, C. Zhang, A. Du, Single-atom supported on graphene grain boundary as an efficient electrocatalyst for hydrogen evolution reaction. Chem. Eng. Sci. 194, 58–63 (2019). https://doi.org/10.1016/j.ces.2018.03.028
[187] L. Zhang, Y. Jia, G. Gao, X. Yan, N. Chen et al., Graphene defects trap atomic Ni species for hydrogen and oxygen evolution reactions. Chem 4(2), 285–297 (2018). https://doi.org/10.1016/j.chempr.2017.12.005
[188] W. Liu, Q. Xu, P. Yan, J. Chen, Y. Du, S. Chu, J. Wang, Fabrication of a single-atom platinum catalyst for the hydrogen evolution reaction: A new protocol by utilization of HxMoO3−x with plasmon resonance. ChemCatChem 10(5), 946–950 (2018). https://doi.org/10.1002/cctc.201701777
[189] S. Ye, F. Luo, Q. Zhang, P. Zhang, T. Xu et al., Highly stable single Pt atomic sites anchored on aniline-stacked graphene for hydrogen evolution reaction. Energy Environ. Sci. 12(3), 1000–1007 (2019). https://doi.org/10.1039/C8EE02888E
[190] M. Li, K. Duanmu, C. Wan, T. Cheng, L. Zhang et al., Single-atom tailoring of platinum nanocatalysts for high-performance multifunctional electrocatalysis. Nat. Catal. 2, 495–503 (2019). https://doi.org/10.1038/s41929-019-0279-6
[191] H. Wei, H. Wu, K. Huang, B. Ge, J. Ma et al., Ultralow-temperature photochemical synthesis of atomically dispersed Pt catalysts for the hydrogen evolution reaction. Chem. Sci. 10(9), 2830–2836 (2019). https://doi.org/10.1039/C8SC04986F
[192] K. Jiang, B. Liu, M. Luo, S. Ning, M. Peng et al., Single platinum atoms embedded in nanoporous cobalt selenide as electrocatalyst for accelerating hydrogen evolution reaction. Nat.Commun. 10, 1743 (2019) https://doi.org/10.1038/s41467-019-09765-y
[193] T. Chao, X. Luo, W. Chen, B. Jiang, J. Ge et al., Atomically dispersed copper-platinum dual sites alloyed with palladium nanorings catalyze the hydrogen evolution reaction. Angew. Chem. Int. Ed. 56(50), 16047–16051 (2017). https://doi.org/10.1002/anie.201709803
[194] S.Yuan, Z. Pu, Hu. Zhou, J. Yu, I.S. Amiinu et al., A universal synthesis strategy for single atom dispersed cobalt/metal clusters heterostructure boosting hydrogen evolution catalysis at all pH values. Nano Energy 59, 472–480 (2019). https://doi.org/10.1016/j.nanoen.2019.02.062
[195] D. Wang, Q. Li, C. Han, Z. Xing, X. Yang, Single-atom ruthenium based catalyst for enhanced hydrogen evolution. Appl. Catal. B: Environ. 249, 91–97 (2019). https://doi.org/10.1016/j.apcatb.2019.02.059
[196] L. Zhang, R. Si, H. Liu, N. Chen, Q. Wang et al., Atomic layer deposited Pt-Ru dual-metal dimers and identifying their active sites for hydrogen evolution reaction. Nat. Commun. 10, 4936 (2019). https://doi.org/10.1038/s41467-019-12887-y
[197] Y. Zhao, T. Ling, S. Chen, B. Jin, A. Vasileff et al., Non-metal single-iodine-atom electrocatalysts for the hydrogen evolution reaction. Angew. Chem. Int. Ed. 58(35), 12252–12257 (2019). https://doi.org/10.1002/anie.201905554
[198] J. Yi, R. Xu, G. Chai, T. Zhang, K. Zang et al., Cobalt single-atoms anchored on porphyrinic triazine-based frameworks as bifunctional electrocatalysts for oxygen reduction and hydrogen evolution reactions. J. Mater. Chem. A 7, 1252-1259 (2019). https://doi.org/10.1039/C8TA09490J

Citation Information

Zonghua Pu, Ibrahim Saana Amiinu, Ruilin Cheng, Pengyan Wang, Chengtian Zhang, Shichun Mu, Weiyue Zhao, Fengmei Su, Gaixia Zhang, Shijun Liao, Shuhui Sun, Single-Atom Catalysts for Electrochemical Hydrogen Evolution Reaction: Recent Advances and Future Perspectives. Nano-Micro Lett.(2020) 12: 21. https://doi.org/doi.org/10.1007/s40820-019-0349-y

History

Received: 07 October 2019 / Accepted: 20 November 2019 / Published online: 13 January 2020


Additional Info

  • Type of Publishing: JOUR - Journal
  • Title: Single-Atom Catalysts for Electrochemical Hydrogen Evolution Reaction: Recent Advances and Future Perspectives
  • Author: Zonghua Pu, Ibrahim Saana Amiinu, Ruilin Cheng, Pengyan Wang, Chengtian Zhang, Shichun Mu, Weiyue Zhao, Fengmei Su, Gaixia Zhang, Shijun Liao, Shuhui Sun
  • Year: 2020
  • Volume: 12
  • Journal Name: Nano-Micro Letters
  • ISSN: 2150-5551
  • URL: http://dx.doi.org/10.1007/s40820-019-0349-y
  • Abstract: Hydrogen, a renewable and outstanding energy carrier with zero carbon dioxide emission, is regarded as the best alternative to fossil fuels. The most preferred route to large-scale production of hydrogen is by water electrolysis from the intermittent sources (e.g., wind, solar, hydro, and tidal energy). However, the efficiency of water electrolysis is very much dependent on the activity of electrocatalysts. Thus, designing high-effective, stable, and cheap materials for hydrogen evolution reaction (HER) could have a substantial impact on renewable energy technologies. Recently, single-atom catalysts (SACs) have emerged as a new frontier in catalysis science, due to SACs have maximum atom-utilization efficiency and excellent catalytic reaction activity. Various synthesis methods and analytical techniques have been adopted to prepare and characterize these SACs. In this review, we discuss recent progress on SACs synthesis, characterization methods, and their catalytic applications. Especially, we highlight their unique electrochemical characteristics towards HER. Finally, the current key challenges in SACs for HER are pointed out and some potential directions are proposed as well.
  • Publish Date: Monday, 13 January 2020
  • Start Page: 21
  • DOI: 10.1007/s40820-019-0349-y